CHVYPOWA
NAXJA Forum User
- Location
- Orlando, FL
I replaced the headlight with a new bulb, still doesnt work. Is there a seperate fuse for the highbeam?
Thanks,
John
Thanks,
John
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
High beam out.. help.
- Thread starter CHVYPOWA
- Start date
flynruff
NAXJA Forum User
- Location
- Raleigh, NC
Could be a switch problem on the column. With a volt meter see if you are getting power to the high beam plug.
Ivan
I Jeep, therefore, I am..
- Location
- Greensboro, Ga
If you have a later model XJ, you may want to check the following fuses:
Fuses #3 & #4 in the distribution panel controls the driver's side plug headlight plug (I forget which is hi beam and which is low)
# 5 & #16 from the distribution panel controls the passenger's side plug headlight plug (I forget which is hi beam and which is low)
Fuses #3 & #4 in the distribution panel controls the driver's side plug headlight plug (I forget which is hi beam and which is low)
# 5 & #16 from the distribution panel controls the passenger's side plug headlight plug (I forget which is hi beam and which is low)
lawsoncl
NAXJA Forum User
- Location
- North Idaho
Is this just one headlight or both? If it's just one, it's got to be a bad connector or damaged wiring. Fuses and the switch would take out both.