Carnage fest swap meet

[BRIANHO13]

I have a winch for sale
http://www.naxja.org/forum/showthread.php?t=93819
and I can also bring a xj rear dana 44 (needs brakes and a dif cover $175)

[Lawn Cher']

I have diff covers for D44, that's a good deal.

[Rev Den]

I will have:

Stock tie-rod and drag link.
D30 cover

D30-4.11 R&P
Trailmaster springs 4"
D30 yolk

Prices will be dependent on MWC membership status and attitude.

Rev

[BOB]

I can bring a D35 yoke and strap kit.
$20.00 before you break/ $50.00 after you break. :D

I have one used D30 bearing unit $10.00

I can bring one slightly bent Hi-Lift jack $20.00



...BOB

[87manche]

any play in that bearing Bob?
What kinda diff guard Rev?

[Rev Den]

What kinda diff guard Rev?

One that guards the diff. :D


Very simaller to this:
http://www.universityofjeep.ca/Products/RockRings/D30.JPG

Rev

[FattyPatty]

BrianHo still got that Dana 44? I will take it off your hands

[Pat]

BrianHo still got that Dana 44? I will take it off your hands

yeah, he feels much like a pootie tang and is looking for a 60. i have dibs on tha foty fo.

[ILLXJ]

Home made roof top tire carrier. Have had a 33 on it with no problems. $25.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0267-1.jpg
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0266-1.jpg

Misc. 2.5L parts from an 89. Let me know what you need & I'll see if I have it.

D35 open carrier factory 4.56 gears. $125 OBO.
JIM.

[HaleYes]

Home made roof top tire carrier. Have had a 33 on it with no problems. $25.
Misc. 2.5L parts from an 89. Let me know what you need & I'll see if I have it.

D35 open carrier factory 4.56 gears. $125 OBO.
JIM.

Shipping for all of it to 62839?

[ILLXJ]

I'll deliver to your front door for an extra $20. JIM.

[BRIANHO13]

yeah, he feels much like a pootie tang and is looking for a 60. i have dibs on tha foty fo.

PAT stop posting drunk, you know I am selling a rear 44 not my front.
FATTY, I pmd you.

[87manche]

One that guards the diff. :D

Rev
Good thing you put that smiley up there, I woudn't have known you were joking :)
PM me your price.
My 30 looks like hell after some rocks did some "custom" work to the front of the diff cover. Gotta figure out how to get the lower three bolts off now.

[BOB]

[QUOTE=87manche]any play in that bearing Bob?

Nope. I replaced both sides.
the side that was bad, I threw it away.
kept the good one.

I also have two used BDS shocks for a 3.5 lift (free)

...BOB

[85xjwoody]

Jim, what parts do you have for the 2.5? I am looking to put FI in the 85. If Mike doesn't want anything you have available for it I might be interested in it. Let me know. Thanks.

Kim.

[87manche]

[QUOTE=87manche]any play in that bearing Bob?

Nope. I replaced both sides.
the side that was bad, I threw it away.
kept the good one.

I also have two used BDS shocks for a 3.5 lift (free)

...BOB
I'll take the bearing then if it fits. I've got some play in my right hand side.
I should ask, what year?
I've got the newer style ones. 97 I think.

[BRIANHO13]

Looks like fatty patty will be coming down to get the axle. still have a winch. also found a dana 30 unit hub in the garage, I will also bring that to CF.

[BOB]

my bearing unit fits my 95 XJ
I can't tell you what years it'll fit.

...BOB

[Lawn Cher']

my bearing unit fits my 95 XJ
I can't tell you what years it'll fit.

...BOB

All's you need to know is if it is for full cast or composite rotors.

[BRIANHO13]

I also have a rustys heavy duty track bar frame brace, I can't use it because my engine skid is in the way. make an offer.

[HaleYes]

I might be interested in that. Lemme do a little research.
I'll jump in line behind Mark for the TB and bracket.

[BRIANHO13]

I'll jump in line behind Mark for the TB and bracket.

its only for the frame brace. (part that goes from the heavy duty mount to opposite frame). sorry for the confusion.

[Lawn Cher']

Its all yours Mike.

[HaleYes]

Its all yours Mike.
I'll pass, I was cornfused on what he had....

[cardboard]

Hey 87 if you need the composite bearings I have a set(both sides) I have been trying to sell for a year. I also the rotors and calipers and pads.

[87manche]

I don't know which rotors I had, I just went in and asked for the rotors for a97.
Lawn chere might know better, since he's the one I bought the axle from.
You remember Mark?
If not I'll have to go and get some measurements.

[Prepmech]

D35 open carrier factory 4.56 gears. $125 OBO.
JIM.

I've got the matching D30 (factory 4.56 gears, disco, HP) that I've decided not to use on my rig.

[Menzenski]

I'll take the bearing then if it fits. I've got some play in my right hand side.
I should ask, what year?
I've got the newer style ones. 97 I think.
I'm pretty sure that front hub bearing assemblies are the same from 90 to 99 model years.

[ILLXJ]

Jim, what parts do you have for the 2.5? I am looking to put FI in the 85. If Mike doesn't want anything you have available for it I might be interested in it. Let me know. Thanks.

Kim.
I think Mike was trying to run up his post count, since he owns half of the 2.5 stuff. PMed you. JIM.

[ILLXJ]

Set of 4 rims. 15X7 with 3.75" of backspacing. XJ bolt pattern. $80. If interested let me know & I'll get better pictures. JIM.
http://i6.photobucket.com/albums/y249/ILLXJ/MVC-026S.jpg

[BRIANHO13]

Also have a 10# CO2 aluminum tank $20.

[Dirk Pitt]

Also have a 10# CO2 aluminum tank $20.

Sold.

Will look great in my homebrew kegging equipment pile.

[BRIANHO13]

winch just got put on the bay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320017393395

[woody431]

Are the trailmaster springs coils or leaves?

I will have:

Stock tie-rod and drag link.
D30 cover

D30-4.11 R&P
Trailmaster springs 4"
D30 yolk

Prices will be dependent on MWC membership status and attitude.

Rev

[Rev Den]

Coils.

FYI - they were 4" springs....more like 3 1/2 now, also they have some rust on the lower coil.

Rev

[Lawn Cher']

I don't know which rotors I had, I just went in and asked for the rotors for a97.
Lawn chere might know better, since he's the one I bought the axle from.
You remember Mark?
If not I'll have to go and get some measurements.

The '97 used the composite rotors, which BTW, worked very nicely for the disc swap on my MJ D44 rear end. Just had to open the center hole .030". But that has nothing to do with your question.

[ILLXJ]

Home made tube doors. $75 OBO.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0219.jpg

Latches are Barrio Fab Works patent pending design.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0225.jpg

JIM.

[ILLXJ]

Air compressor air pump. New. $100. PM for details. JIM.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0268.jpg

[BRIANHO13]

Home made tube doors. $75 OBO.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0219.jpg

Latches are Barrio Fab Works patent pending design.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0225.jpg

JIM.

Will these fit a 98?

[ILLXJ]

Will these fit a 98?
Replied to your PM. JIM.

[BRIANHO13]

I have a winch for sale
http://www.naxja.org/forum/showthread.php?t=93819
and I can also bring a xj rear dana 44 (needs brakes and a dif cover $175)

Ok I will take 425 to get the winch out of my garage.

[seanR]

--I have a brand new master cylinder for a 2000 XJ

--I have a set of JKS sway bar discos with a front sway bar.

--I have quite a few D44 front hubs, some are brand new, no bearings or spindles, just the hub.

Make me an offer.....

[xtrm4x4wanab]

ive got 6 brand new red Blitz brand 5gal gas cans that HFT wants $35 for. ill let em go for $15 each. i can get my hands on a few more if anybody wants more than ive got now... thought id pass along the employee savings:wave: