Quick question

How the hell do I remove the fuel line where it meets the injector rail.
Its a '96 and I removed the external clip and it appears as though I should just be able to pull the line off, but it won't come off. It will spin but not come out.

HELP!!

Rick

you are suposed to use a special fuel line disconnect tool that looks something like one of these.
http://www.mytoolstore.com/kd/kdengi04.html

there is a little flare on the end of the fuel rail and a round spring inside the line, the spring locks over top of the flare, this tool slides in between the spring and the rail allowing the spring to pass over top the flare,

Hope this helps, good luck

Mucho Gracias!!

you can just push in the white tabs and pull the fitting back. thats the way my '95's are anyway.