• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

231 TxCase question

Boatwrench

NAXJA Forum User
Location
Petaluma, CA
What's this threaded passage for? It's located on the backside, tail housing. This is pasage is not on my 2000XJ.

DSCN3801.jpg


DSCN3799.jpg



For some reason the threads are not present in the photos.
Thanks,
Tom
 
OK I bought this mostly because it had a SYE. It's going into the 2000 that doesn't have a disco axle. Can I just plug it and call it good? or will the shifting of the TxCase be affected.

Thanks,
Tom
 
MoparManiac said:
I believe there's also the electric plug switch for the XJs with non-discos that screws in there as well.

Usually the SYE kit just comes with a plug for the hole if you dont have the disco actuator. I remeber because the rod on mine came almost all the way out to the plug and nearly hit it. Other than that there is nothing else that goes in the hole on non-disco's.
 
Back
Top