POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
some one had a write up on here before the crash on a OTK kit built with parts from PSC. anyone still have this write up, or parts list?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
poison spyder OTK steering
- Thread starter POLAR_JEEP_04
- Start date
JNickel101
NAXJA Forum User
- Location
- Alamogordo, NM
Ahhhh...what's that guys name...I love his steering setup....he's got a white XJ...and pictures of his rig and his buddies truck up on rocks all flexed out.....
dammit...whats his name....
dammit...whats his name....
Pologuy1441
NAXJA Forum User
- Location
- NorCAL
shomsky462
http://www.naxja.org/forum/showthread.php?t=918210&highlight=poison+steering
its not over the knuckle but it super beef. he's got it on his comanche now.
2-right hand thread 3/4" shank, 5/8" bore heim joints
2-left hand thread heims
2-right hand thread 3/4" jam nuts
2-left hand thread jam nuts
5 feet of 1.5" DOM .250wall tube
3 feet of tube
2-3/4" tube adapters right hand thread
2-left thread adapters
3-1/4", 5/8"bore misalignment washers
1-5/8", 5/8"bore misalignment washer
http://www.naxja.org/forum/showthread.php?t=918210&highlight=poison+steering
its not over the knuckle but it super beef. he's got it on his comanche now.
2-right hand thread 3/4" shank, 5/8" bore heim joints
2-left hand thread heims
2-right hand thread 3/4" jam nuts
2-left hand thread jam nuts
5 feet of 1.5" DOM .250wall tube
3 feet of tube
2-3/4" tube adapters right hand thread
2-left thread adapters
3-1/4", 5/8"bore misalignment washers
1-5/8", 5/8"bore misalignment washer
Last edited:
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Almost every manufacturer uses the same 3/4-1 ton Chevy end available at any auto store.
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
.Pologuy1441 said:
thats what i was looking for... do I need to get a OTK set up or will this work for my jeep (97 XJ 5.5" TNT long arm 34''s)? do i need to use a drop pitman arm (already have one)?
Last edited:
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
what do i need to do about my track bar?
CanMan
NAXJA Forum User
- Location
- Lake Tapps, WA
polar_jeep_04 said:
More and likely a JKS over the axle bracket.
Pologuy1441
NAXJA Forum User
- Location
- NorCAL
i thought the tnt kit came w/ a trackbar? did u get the upgrade or the whole system. its not an OTK unless u want to make it a "Y-link" by connecting the drag link to the tie-rod or you put the passenger side knuckle in single sheer.
