Winterfest Swap Meet

[macgyvr]

My short list is that I have a set of 35 c-clip shafts that I will be bringing to sell.

I might (probably will) come up with more before then.

mac 'they even come with the c-clips' gyvr

[Dirk Pitt]

I have a ZJ tie rod and draglink combo I could bring. The tie rod is solid as compared to the XJ hollow tube.

Also have a stock set of LCAs.

(2) stock honeycomb aluminum rims.

(1) 31" off brand all terrain spare tire in good shape mounted on a stock honeycomb aluminum rim.

Maybe more.

[BRIANHO13]

I have a front HP44 for sale ready to bolt in (it will stay in the heep through wf).

alloy shafts, joints 5.13's, aussie, heavy duty 1 ton steering, drop waggy pitman arm, drilled and tapped hydro assist steering gear and ram.

[Rev Den]

Stock steering

Stock D30 disco axle shafts - Complete

Let me know


Rev

[IllianaXJ]

I have a front HP44 for sale ready to bolt in (it will stay in the heep through wf).

alloy shafts, joints 5.13's, aussie, heavy duty 1 ton steering, drop waggy pitman arm, drilled and tapped hydro assist steering gear and ram.
Dammit! As soon as I get the 30 decently built this comes along :D


I have a set of grey leather XJ seats from a 95(I think) Country I can bring if there is interest.
I also have from a 96 and older:
Pair of taillights
Grey center console
Misc t'case parts (could probably build another one out of the parts)I'm sure I could dig up more. Shoot, if someone wants to buy my popup camper they can tow it home from Attica!

[w_howey]

I'd better start saving my pennies. I've already seen a few things listed I could use...

[w_howey]

I have a set of leather XJ seats from a 95(I think) Country I can bring if there is interest.


What color???

[IllianaXJ]

What color???

Grey.

[RedHeep]

Front and rear stock bumpers for a '91
Stock taillights
4 '91 limited wheels plus aluminum spare
Stock air filter box
'91 4.0 shortblock needs rebuilt (has brackets, exhaust/intake manifolds)
Overhead console with compass/temperature (needs reupholstered)

Josh

[XJ_ranger]

I have some white shocks...

[Ramsey]

I have some white shocks...
Those things are awesome.

[RedHeep]

I have some white shocks...

But can you fit 'em in your carryon?

[XJ_ranger]

But can you fit 'em in your carryon?

yeah - its not like they are nice gas charged shocks that extend with no load on them... :D

[87manche]

Stock taillights


Josh
I thought the wife was getting those, she's gonna be hurt...

[RedHeep]

I thought the wife was getting those, she's gonna be hurt...

If I recall correctly, I mentioned that I had a pair while I was in my attic giving you my leaf springs for free and you said you didn't need them.

I then told you that I would probably bring them to WF even if someone didn't want them in case someone broke one and needed to drive home legally.

I offered you dibs and you turned me down, now they're up for sale.

I have to make some money so I can offset how much your wheeling habit costs me :D

[IllianaXJ]

If I recall correctly, I mentioned that I had a pair while I was in my attic giving you my leaf springs for free and you said you didn't need them.

I then told you that I would probably bring them to WF even if someone didn't want them in case someone broke one and needed to drive home legally.

I offered you dibs and you turned me down, now they're up for sale.

I have to make some money so I can offset how much your wheeling habit costs me :D

Ouch.

[87manche]

I recall that you said you didn't feel like going up there again and getting them.

I really don't care, both my taillights are busted anyway.

her tail lights are her problem ;)

[Dano]

i have a complete 4.5" lift for sale in the MWC for sale forum.
if there's interest I'll show up.

[seanR]

I have a MileMarker Hyrdo winch for sale.
I will have better luck if fellow jag bags keep their mouths shut this time!

[BRIANHO13]

I have a MileMarker Hyrdo winch for sale.
I will have better luck if fellow jag bags keep their mouths shut this time!

I used to have a mm hydro that thing will pull allllllll day long.

[HaleYes]

I have a MileMarker Hyrdo winch for sale.
I will have better luck if fellow jag bags keep their mouths shut this time!

Hmmmmm,............

I was thinking hydro assist down the road........but I may be swayed a little.

I know it's slow, but it does have balls. I'm not trying to win any winch speed competitions. Shoot me a number Sean....I mean it is the Presidential winch and all.:D


Hale

[seanR]

Hmmmmm,............

I was thinking hydro assist down the road........but I may be swayed a little.

I know it's slow, but it does have balls. I'm not trying to win any winch speed competitions. Shoot me a number Sean....I mean it is the Presidential winch and all.:D


Hale
Number has been shot

[BOB]

I am looking for a 33' spare
preferably 10.50 or 11.50 mud
preferably on a black rim
preferably one that holds air

I may have a complete set of non disco D30 axleshafts
They look stock, probably 260.
if interested shoot me an offer.

BOB

[BRIANHO13]

I have a 33 but you have to earn it, it is stapled together in one area but it supposedly holds air.

[XJ&CHZ4ME]

Hey Bob, I have a 33x12.5 Mud King spare that is around 1/4 tread. I know your looking for bit narrower then that, but It is a good trail spare to get a guy back to the trailer. I can have it at Winterfest for you, or someone if they are interested. $15...or a case of PBR...or trade for?? (no rim at this time)

[w_howey]

I am looking for a 33' spare
preferably 10.50 or 11.50 mud
preferably on a black rim
preferably one that holds air

I may have a complete set of non disco D30 axleshafts
They look stock, probably 260.
if interested shoot me an offer.

BOB


I've got a 32x11.50 BFG A/T some tread, its round, holds air. Special MWC price freebie......

[BOB]

I've got a 32x11.50 BFG A/T some tread, its round, holds air. Special MWC price freebie......

that sounds good to me.
I gotta buy you a beer for it at least
thanks !

I forgot to mention I have one stock 87 Chrome MJ front bumper-decent shape
87 MJ three pice front grill and bezels

BOB

[XJ&CHZ4ME]

I have a buch of stuff I want rid of.

stock coil springs
a set of 27 spline C8.25 shafts
C8.25 carrier w/ 3.55 ring on it (no pinion)
96 down drivers side tail light
cable adjust drivers side mirror
Stock TJ coils
intermediate shaft for a D30 disco unit w/ collar
New in pkg t-case drop kit
NP231 tail cone and stock shaft
a handful of TRE's for a stock set up
RE HD tie rod w/ stock TRE's
fuel pump out of a 90 XJ (Renix item)
Stock Jeep Grizzly rim

I am sure I will find more as I keep digging

[BRIANHO13]

ok looks like I might have some 16" wbead lock wheels with a bad ass paint job and some 37" grooved boggers for sale. bolt pattern is 5 on 5.5.

[stupidweirdo]

Hey Bob, I have a 33x12.5 Mud King spare that is around 1/4 tread. I know your looking for bit narrower then that, but It is a good trail spare to get a guy back to the trailer. I can have it at Winterfest for you, or someone if they are interested. $15...or a case of PBR...or trade for?? (no rim at this time)

Looks like Bob doesn't want it, but I'll take it. :)

WTF PBR?!?!.......thought I was the only one. heh

[w_howey]

I have a set of (4) aluminum alloys that are 15x8 with a 6-lug Chevy pattern(fit Waggy or toy axles) They had a clear coat, but it has worn off the wheels mostly...

[Prepmech]

I've got a tow rig/trialer for sale that I might be bringing to winterfest. $19K and you can tow your broke junk home.

[XJ&CHZ4ME]

Looks like Bob doesn't want it, but I'll take it. :)

WTF PBR?!?!.......thought I was the only one. heh

sounds good, I'll have it there with me.

[w_howey]

that sounds good to me.
I gotta buy you a beer for it at least
thanks !

I forgot to mention I have one stock 87 Chrome MJ front bumper-decent shape
87 MJ three pice front grill and bezels

BOB

Its all yours...

You wouldn't happen to have a rear step bumper for an MJ laying around??

[Prepmech]

Just remembered I have a new dana 30 open carrier for 4.10 and numerically higher gears I need to get rid of.

[BRIANHO13]

Rusty's long arm ugrade kit (Gently used :D )
$500

[Prepmech]

RE drop pitman arm, reamed for 1-ton steering.

[IllianaXJ]

That reminds me - if anyone has a Waggy drop pitman laying around, I'd be glad to take it off their hands.

[XJ&CHZ4ME]

RE drop pitman arm, reamed for 1-ton steering.

how much? I just got my new 1 ton steering and that would save me from reaming out my new arm.

[BOB]

got a used roller fairlead......$5

BOB

[w_howey]

got a used roller fairlead......$5

BOB
Oooooohhh..... I'm gonna have to go scrounge the couch for change......

[IndyXJ]

If I make it...FREE 3.55 R+P, D30 and 8.25.

Anyone want this?

[Prepmech]

RE drop pitman arm, reamed for 1-ton steering.

sold.

[Lawn Cher']

Just remembered I have a new dana 30 open carrier for 4.10 and numerically higher gears I need to get rid of.

4.10 & higher or 3.73 & higher? I thought the D30 carrier break was between 3.55 & 3.73. I I'm not mistaken, I could use it!

[XJ&CHZ4ME]

your correct, the D30 breakover is 3.73

[IllianaXJ]

Set of front half doors for a 96 and older 4 door XJ. I don't think I can use them on my 01 since the hinge changed. Built in cupholder in both doors. Locks still work (not sure why :D)

Best pic I have right now, they're buried in the shed at the moment. $150.

http://i61.photobucket.com/albums/h76/bfourman/HPIM0730.jpg

[Prepmech]

4.10 & higher or 3.73 & higher? I thought the D30 carrier break was between 3.55 & 3.73. I I'm not mistaken, I could use it!

Ok, that one is going to Mark.

I've also got a Jet stage 2 chip I just took off of my '00 4.0L. Not sure what years it fits.

[IllianaXJ]

Ok, that one is going to Mark.

I've also got a Jet stage 2 chip I just took off of my '00 4.0L. Not sure what years it fits.


96-01 according to Jet. Did you notice any difference with the chip?

[Prepmech]

Did you notice any difference with the chip?

I put a 180 degree thermostat in and ran 90 octane gas when I had it in. With anything lower than 90 octane it would spark knock when climbing steep hills. It didn't do anything fantastic, but you could feel a small difference. Definately not worth the money to buy one new, but if you found a good deal on a used one...

PM me if seriously interested

[XJ&CHZ4ME]

Hey Travis,

I got the arm today, I owe ya at Winterfest! Miller Lite that is ;)

Thanks!

[indyjeepnut]

I have an 87 2wd MJ I just found any need anything off it?

pm me.

[Prepmech]

Just found a set of JKS style rear axle shock mounts that I didn't use on my axle swap. They are for 3.25" axle tubes, but would probably work on 3" tubes with a little work. Shock mounting studs/hardware included.

[seanR]

I have a set of rear side windows out of a Two Thousand.
If someone wants them, PM me.

[Fore Wheeler]

got a used roller fairlead......$5

BOB


hey bob. if you don't get any others, I'll take this from you.

hit me back channel so I don't buy one before wf.

thanks
dan

[Fore Wheeler]

got a grey sound bar with speakers, a blue and grey center console.

[Fore Wheeler]

I also have a 231 case from a 99ish. $75.00

[ILLXJ]

I have a set of JKS disco's. Part # 2001. 4-6" of lift. $75. JIM.

[skoolie72]

I also have a 231 case from a 99ish. $75.00
Consider this sold.
I was going to add 2low and 4:1 to mine, but for the price, I could take my time and add an HD chain, etc. to this one and have no down time.

I have a single brand new 15x8 D-window rock crawler wheel with 3.75 bs -$20
Also have a set of custom HD rear bumper brackets from my old BPI rear bumper. Use them to build your own bumper, as they have 6 attachment points. -$20
Set of charcoal Catch All mats for 98-01 Durango with third row seating. $260 new, but I will take $40 for the set.
Brand new 25 foot 70-series chain for tying your junk down.(hooks on either end) -$20
Set of HD ratchet straps with axle loops for tying your junk down. $40
Take the set for $50 and replace the crap that holds your crap to your other crap.

[XJ&CHZ4ME]

skoolie72, I'll take that wheel for $20

[skoolie72]

skoolie72, I'll take that wheel for $20
Done.

I also have a seldom used 10 lbs. air system from The Source.
Includes bracket, regulator(150 psi fixed), and coil hose.
http://www.offroadairstore.com/servlet/Detail?no=3
Cost $250 new, but I will take $150 for it.
Finished up my OBA system, and no longer need it.
Tank is black, not brushed, and has no scratches, dents, etc.
I will even fill it up beforehand.

[Fore Wheeler]

Consider this sold.



cool.

[cardboard]

Hey skoolie does your tank have a pressure gauge on it, if not can one be added later.
Digger

[skoolie72]

I posted the wrong link.
http://www.offroadairstore.com/servlet/Detail?no=7
You can always add a guage.
You could also add an adjustable regulator.
I didn't need either, as I never needed to adjust my airflow, and I can tell by weight when it is close to empty.

[IllianaXJ]

That's a heck of a deal, I paid $200 for the exact same C02 system a couple months ago, and just paid $18 to have it filled.

[skoolie72]

CO2 system gone.
Black Rock Crawler wheel spoken for.

[BOB]

Here is my CO2 setup.
here is how you can put it together for about $100.00

here is the CO2 tank. I have a 5# tank
I understand it can fully inflate about 10-14 33" tires
http://www.beveragefactory.com/draft...anks/co2.shtml (http://www.beveragefactory.com/draftbeer/tanks/co2.shtml)

here are the "single" gauge regulators.
you only need something simple.
http://www.beveragefactory.com/draft...tors/co2.shtml (http://www.beveragefactory.com/draftbeer/regulators/co2.shtml)

You will need a basic air hose and starter kit.
(don't buy cheap plastic crap)
you can get those at Sears or Menards.
I got a 50' air hose and that reaches each of my
tires on the vehicle.

That should cover everything.
The Badlands and Cliffs have air
But, this is kind of handy to have.

...BOB

[w_howey]

2 sets of D-35 Non-Clip shafts.

2 Working Trac-Loc limited slips, 1 for C-clips, 1 for Non-C-Clip

D-35 3.07 R&P
2 sets D-35 3.55 R&P

[HaleYes]

I have a bunch of these:
http://img.photobucket.com/albums/v647/haleyes/101_4237.jpg



See here for details:
http://www.naxja.org/forum/showthread.php?p=243738760#post243738760

[skoolie72]

Here is my CO2 setup.
here is how you can put it together for about $100.00

here is the CO2 tank. I have a 5# tank
I understand it can fully inflate about 10-14 33" tires
http://www.beveragefactory.com/draft...anks/co2.shtml (http://www.beveragefactory.com/draftbeer/tanks/co2.shtml)

here are the "single" gauge regulators.
you only need something simple.
http://www.beveragefactory.com/draft...tors/co2.shtml (http://www.beveragefactory.com/draftbeer/regulators/co2.shtml)

You will need a basic air hose and starter kit.
(don't buy cheap plastic crap)
you can get those at Sears or Menards.
I got a 50' air hose and that reaches each of my
tires on the vehicle.

That should cover everything.
The Badlands and Cliffs have air
But, this is kind of handy to have.

...BOB

Awesome.
Be sure and link me to your next 'for sale' thread so I can alert any potential buyers that they could do better for less $$$.
BOB...you are a jagbag, but you are my type of jagbag.
You did run streetlocks at one time, though...
Hope all is well.

[Big Red]

I have a few sets of 84-96' XJ tail lights if anyone wants a pair.

Anyone have 29 spline 8.25 shafts and a open carrier lying around?

I have a open 27 spline 8.25 with 4.56 gears and discs that came in the XJ and I have a XJ 44 lying around also so I cannot decide whether to build up the 8.25 a bit or just sell it & build up the XJ 44. :dunno:

:yelclap: Offers on a 27 spline 4.56 geared open 8.25 with disc brakes? :yelclap:

Big Red (XJ in my avatar pic) could also be had for a reasonable price of $6,499 OBO! ;)

Troy

[IllianaXJ]

Half doors are spoken for.

My camper will be for sale at WF also. Cheap. I mean Cheap.

[macgyvr]

Half doors are spoken for.

My camper will be for sale at WF also. Cheap. I mean Cheap.

what kind of camper?

mac 'pics' gyvr

[BRIANHO13]

I have a set of stock 35 spline front 60 inners and a set of 30 spline outters.

[IllianaXJ]

what kind of camper?

mac 'pics' gyvr
1978 Coleman Rebel popup. Decent shape, electric hookup, A/C. Queen bed on one end, twin on the other. Steel storage box on the front. New hubs and rims/tires (3) in July of 06. Comes with a friction type sway controller, 1 7/8" ball. I also have reflective covers for the bunk ends to keep the interior cooler in the summer (www.popupgizmos.com (http://www.popupgizmos.com))

Blue tape by the door has been replaced with iron-on patches. Canvas could use replacing, but still keeps the rain out.

http://i61.photobucket.com/albums/h76/bfourman/HPIM0701.jpg

http://i61.photobucket.com/albums/h76/bfourman/HPIM0702.jpg

http://i61.photobucket.com/albums/h76/bfourman/HPIM0703.jpg


Ceiling had some water damage in the past, I removed the damaged wood, but never replaced it. It looks rough, but doesn't affect function.

http://i61.photobucket.com/albums/h76/bfourman/HPIM0707.jpg

Overall it would make a good Jeepin/hunting camper, but our family is outgrowing it quickly. We used it several times in 07 in its current condition, packed full of myself, the wife, 2 kids and our dog. Pulls easily with small vehicles, it only weighs 1100lbs. Shoot, I pulled it to Myrtle Beach in 05 with a TJ on 31s and stock gears (3.07).

[Dirk Pitt]

I need a 33" spare for a 15" rim and a 15x8x4"bs rim

Please PM me if you have something.

[ILLXJ]

I have a disc brake set up from a 95 CV. Complete except for the e-brake cables. $200 or $180 for members. Also can get a set from a 96 CV but will need to pull them before setting a price. Let me know. JIM.

[IllianaXJ]

Camper may not be making the trip unless someone wants to buy it. I never got around to tarping it for the winter and some water got inside. PM me if interested though.

[Jeepguy91]

I have got front and rear driveshafts from a 88 xj with a 4.0, 5speed, dana 35 if anybody is interested. Also have front and rear stock bumpers from a 91 xj laredo. And if anybody would be interested in a tow rig i will have mine down there with an offer in the window. Its a 2000 Dodge ram 1500 4x4 with 57,000 miles.

[87manche]

I have got front and rear driveshafts from a 88 xj with a 4.0, 5speed, dana 35 if anybody is interested. Also have front and rear stock bumpers from a 91 xj laredo. And if anybody would be interested in a tow rig i will have mine down there with an offer in the window. Its a 2000 Dodge ram 1500 4x4 with 57,000 miles.
whatcha want for that front driveshaft?

[HaleYes]

I've got a 20lb C02 tank. Tank only. It's aluminum and near full. The bottle is out of date so the next time it's filled it'll need pressure checked. I've had intentions of getting a regulator and putting it in the Jeep but I've never done it. It's just taking up space and I don't know when I'll get around to messing with it. I'd really like to have a smaller tank anyway. Speak up if you're interested.

[Jeepguy91]

whatcha want for that front driveshaft?

I would take $20 for it. Let me know and i will bring it along.

[Big Hank]

Radial BAJA Widetrack
32x11.50 r15 on a black steelie wheel
Cherokee Bolt patern 4 inch back spacing

Brand new, 4+ year old, mostly garaged kept. Still has the tits. Rim is the same age. Neither show signs of age.

Pat from :NAXJA: had it on his tire carrier for maybe two years. Its been in my garage ever since.

$80

http://i37.photobucket.com/albums/e96/GeneMJ/DSC00729.jpg

http://i37.photobucket.com/albums/e96/GeneMJ/DSC00730.jpg

[IllianaXJ]

Halfdoors back up for sale. I WILL get some pics up tomorrow.

[Jeepguy91]

Halfdoors back up for sale. I WILL get some pics up tomorrow.

How much are you asking for these? Mite be interested in them. Hate looking out the small window i have in mine.

[w_howey]

Tomken NP 242 skid plate... Used... Scratched a bit dented, its missing the self-tappers used on the frame side.

[skoolie72]

I would take $20 for it. Let me know and i will bring it along.

If this falls through, I will gladly give you $20 for that front driveshaft.

[IllianaXJ]

How much are you asking for these? Mite be interested in them. Hate looking out the small window i have in mine.

$150.

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM0968.jpg

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM0969.jpg

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM0970.jpg

[Rev Den]

Are those for a 2 door?

Rev

[IllianaXJ]

Are those for a 2 door?

Rev

4 door fronts.

[Rev Den]

Poop.

On a side note....I have a D30 disconnect outter seal installation tool.

This tool is over $100 if you can find one....mine is hommade and make the outter seal installation a breeze...15 min.

Great deals for NAXJA members.

Rev

[Jeepguy91]

I have also got 4 33x12.50x15 super swamper tsl's that i need to get rid of. Two of them are pretty much shot but the other 2 have a little bit of tread left on them. I am asking $50 for all 4 tires. These would make good spares if you need to get off the trail. Let me know if you are interested and i can bring them with me.

[w_howey]

Set(4) of alloy wheels with a 6 x 5.5 bolt pattern. 15 X 8. Clear coat is off or peeling.

[XJ&CHZ4ME]

Jeepguy91, bring those tires with ya. I'll take em.

[Jeepguy91]

Will do. Will have them there in a yellow dodge ram for ya.

[bshaw]

have a lift gate/hatch for a pre 97. loaded, white w/ gold pin strips, and tented glass (stock). like to get $40 out of it.....

[HaleYes]

If anyone is interested in some 4.5" coils, I may have some available by WF. They are Rusty's coils.

[XJ&CHZ4ME]

how much?

[Jeepguy91]

Darn it, you beat me to it.

[HaleYes]

how much?

Check your PM's.

[XJ&CHZ4ME]

Hale, if you have other interest in these then feel free to try and sell them to the 1st with the money. I was inquiring for a buddy, but I am unsure of his financial status. Thanks...

[IllianaXJ]

Stock XJ pitman arm reamed for 1 ton TREs. $20 obo.

[lesslimited]

Stock XJ pitman arm reamed for 1 ton TREs. $20 obo.


PM sent!

[IllianaXJ]

PM sent!

Replied. Pitman sold!

[XJMK]

If anyone is interested in some 4.5" coils, I may have some available by WF. They are Rusty's coils.

Hale, if you have other interest in these then feel free to try and sell them to the 1st with the money. I was inquiring for a buddy, but I am unsure of his financial status. Thanks...

I'll be the backup if it falls through.

[HaleYes]

I'll be the backup if it falls through.

91Jeepguy is actually second in line but he's yet to reply to my PM.

First serve as far as I'm concerned.Show me the money!

[D4mm1t]

I have a set of 5 16" stock wheels and tires off my 97 ZJ Limited, pics and description is here: http://www.nagca.com/forum/viewtopic.php?t=33759

Can pick up before or I can bring 'em with me if paid first, don't wanna have to haul all that out there then have to find a place to hide them so I can wheel.. ;)

Jerry..
jerry-n@peoplepc.com

[Jeepguy91]

Go ahead on the coils boredchimp, tow rig started acting up so gotta fix that so i can make it to WF.

[steelmen]

2 black steelies
2-31" baja claws one bald one good
91 hood Good shape
YJ tail gate
a couple of front drive shafts
6* shims (RE)
driver 4dr glass

[Jeepguy91]

What bolt pattern, size, backspacing, and how much for one of the steelies? Need a extra rim for my spare.

[IllianaXJ]

How much for a front d/s? I could use a spare. 4.0/auto trans?

[steelmen]

What bolt pattern, size, backspacing, and how much for one of the steelies? Need a extra rim for my spare.
5 on 4.5

4" BS

25 bucks sound fair?

[Jeepguy91]

Sounds good to me. Bring one of them along with ya. Now i just need to find a way to mount it up at WF just incase i need it.

[steelmen]

How much for a front d/s? I could use a spare. 4.0/auto trans?
I have no idea what any of them came out of but i could give you some measurements tomrrow

i have some in great shape to some that need a complete rebuild (think i have 4 all together).

25-50 depending on what fits your need.

[steelmen]

Sounds good to me. Bring one of them along with ya. Now i just need to find a way to mount it up at WF just incase i need it.
cool i'll clean them up tomorrow.

Sam

[XJ&CHZ4ME]

Sounds good to me. Bring one of them along with ya. Now i just need to find a way to mount it up at WF just incase i need it.

I'll have a generator, air compressor, tire irons and a tire mallet with me. Look me up and we can get ya hooked up with mounting it.

[XJMK]

Go ahead on the coils boredchimp, tow rig started acting up so gotta fix that so i can make it to WF.
Thanks, hope you can make it!

[bshaw]

have a lift gate/hatch for a pre 97. loaded, white w/ gold pin strips, and tented glass (stock). like to get $40 out of it.....-still have this for sell.....

should have 4 15x10 cragar soft 8's for sell. 5 on a 4.5 bolt pattern, basically brand new condition. pm me for more details.

[IllianaXJ]

$150.

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM0968.jpg

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM0969.jpg

http://i61.photobucket.com/albums/h76/bfourman/For%20Sale/HPIM0970.jpg
Still got these. I don't really want to drag them along unless there is interest.

Edit: same for the camper.

[Jeepguy91]

Sounds good XJ&TJ4ME. Will get ahold of you when i am there.

Illianaxj, think i am gona pass on them half doors. Wish i had the extra money for them.

[HaleYes]

If anyone is interested in some 4.5" coils, I may have some available by WF. They are Rusty's coils.

Coils are spoken for.

[IllianaXJ]

Almost forgot - full set of TJ flares, faded but in good shape. Make an offer.

[D4mm1t]

I have a set of 5 16" stock wheels and tires off my 97 ZJ Limited, pics and description is here: http://www.nagca.com/forum/viewtopic.php?t=33759

Can pick up before or I can bring 'em with me if paid first, don't wanna have to haul all that out there then have to find a place to hide them so I can wheel.. ;)

Jerry..
jerry-n@peoplepc.com

I sold them, I'm too dumb to figure out how to edit my post so did this.. :anon:

Thanks..

[hanaxj87]

Anyone looking for these items.
1]Dana 30 good used complete front axle shafts with large 297x u-joints with abs rings 50.00 each.
2]Dana 30 good used complete front axle shafts with small 260x u-joints with no abs rings 30.00 each.
3] JKS Front shock conversion mounts new never used See them on jeepin.com p/n# JKS9601/2 . 25.00
4]Jeep grey plastic center caps excellant condition 15.00 each I have two
5] Front drive shaft assy. ready to use in your front or in rear with SYE 75.00
6] Front electric seat bases out of a 1987 xj two door they both work fine the seats are still attached and in fair shape. tan cloth bucket fold down. controls are included they power forwarded ,tilt,and raise. 40.00 for both.Feel free to e-mail with any questions nplambert@zoomtown.com Thanks Nick

[Jeepguy91]

[/QUOTE] Front electric seat bases out of a 1987 xj two door they both work fine the seats are still attached and in fair shape. tan cloth bucket fold down. controls are included they power forwarded ,tilt,and raise. 40.00 for both.Feel free to e-mail with any questions nplambert@zoomtown.com Thanks Nick[/QUOTE]

I mite be interested in these if they would work in my 91 4 door. Don't know if there is any difference in the 2 door and 4 door seats. If somebody knows if they will work or not let me know.

[w_howey]

I've got a fiberglass hatch. Rear defroster worked when removed. No interior panel, speakers are toast. Rear wiper didn't work.. Its dark blue metallic in color and the clear coat is peeling(big surprise).

[IllianaXJ]

Almost forgot - full set of TJ flares, faded but in good shape. Make an offer.

Sold!

[BOB]

I may have a used NP 242 t-case skid plate.

anyone?

BOB

[mcnamaag]

I may have a used NP 242 t-case skid plate.

anyone?

BOB


How much? I will pick it up at WF. If its reasonable I want it.

[BOB]

How much? I will pick it up at WF. If its reasonable I want it.

I am waiting for a TNT belly pan
If it gets here on time for me to installi it,
I will bring the the skid to WFI can't remember what brand it is?
I'll see what shape it is in.
I'll shoot you a price. (usually cheap)

BOB

[mcnamaag]

I am waiting for a TNT belly pan
If it gets here on time for me to installi it,
I will bring the the skid to WFI can't remember what brand it is?
I'll see what shape it is in.
I'll shoot you a price. (usually cheap)

BOB

Thank you sir.:patriot:

[skoolie72]

1]Dana 30 good used complete front axle shafts with large 297x u-joints with abs rings 50.00 each.

I will take both of these.
Thanks.

[87manche]

anyone have a drivers side tail light?
I just broke the wifes.

[XJ&CHZ4ME]

YES... It is for 96 down. $10 plus shipping or I can bring it to ya at Wf. let me know what works for ya.

[87manche]

YES... It is for 96 down. $10 plus shipping or I can bring it to ya at Wf. let me know what works for ya.
if you could bring that it would be sweet.

that way I don't have to hear the wife bitch about the tail light I broke while in the driveway.

[XJ&CHZ4ME]

done deal, I will throw it in the pile of items to bring.

[87manche]

done deal, I will throw it in the pile of items to bring.
sweetness, I'll add you to the people I need to bring money for ;)

[BOB]

I have a NEW Craftman 190 piece tool set. It has NOT been used.
It was a Christmas gift. Sears said to return it,
I would have to go to the store that it was purchased from yada yada yada....
I decided to get the "easy to read" tool set from Craftsman.
here's a chance for one of you guys with better vision to save a few bucks.

$140.00 deliver to WF only

BOB


http://www.sears.com/shc/s/p_10153_12605_00936190000P?vName=Tools&cName=Mechanics+Tools&sName=Mechanics+Tool+Sets&filter=Mechanic+Tool+Set+Type%7C101+to+200+pc.+mec hanics+tool+set

[macgyvr]

well I started this thread with having a set of D35 shafts, which I still have and will tote along with me. I also have a d30 4.10 and up case (ok like 3.73 and up case) open that I will sell real cheap is someone is interested...otherwise I'll leave that at home

mac 'has another parts rig in the driveway' gyvr

[w_howey]

well I started this thread with having a set of D35 shafts, which I still have and will tote along with me.

mac 'has another parts rig in the driveway' gyvr

ABS or not??? If not, how much???

[macgyvr]

ABS or not??? If not, how much???

hhhhhhhhhmmmm.....that's a good question.

I'll have to look.

The ABS have tone rings on them like the d30 shafts?
I have a limited experience with d35 axles...if they are on a rig I buy I immediately replace the entire axle...

mac 'they are cheaper if you buy them before you break them on the trail' gyvr

[w_howey]

hhhhhhhhhmmmm.....that's a good question.

I'll have to look.

The ABS have tone rings on them like the d30 shafts?
I have a limited experience with d35 axles...if they are on a rig I buy I immediately replace the entire axle...

mac 'they are cheaper if you buy them before you break them on the trail' gyvr

Yep... they have a tone ring right behind the wheel flange.

w 'I'm so broke I can't even pay attention' howey

[learjets]

Anyone have a engine for a 1989, 6cyl 4.0L, (block and head). Core or running condition?

I can also pick it up, if in Indiana, Michigan, or Kentucky if you can't bring it to Winterfest.........


Thanks

[steelmen]

Anyone have a engine for a 1989, 6cyl 4.0L, (block and head). Core or running condition?

I can also pick it up, if in Indiana, Michigan, or Kentucky if you can't bring it to Winterfest.........


Thanks
i have a 93 that needs rebuilt i could let go for cheap

[HotwiredXJ]

I am looking for a set of Flares, bushwacker or Rusty's.

Also looking to sell this:
http://www.naxja.org/forum/showthread.php?t=944533

[HotwiredXJ]

Also going to try to sell these BFG A/Ts too They are 33x12.5/r15 with 95-98% left on them. I am looking to sell the rubber, so let me know quick if I need to bring them, so I can break them down.

http://naxja.org/forum/showthread.php?t=944674

[Comanchedude]

I have a set of used R/C non adjustable lower control arms $45.00 obo
they are 16" eye-eye "I think"
also have (3) BF goodrich A/T tires good for spares have tred but at 10-20% they are 33.12-15 mounted on stock Jeep steel wheels hold air ready for use $20.00 each.
Will deliver at W/F

If intrested PM me and I can send pics if needed

Tom

[GRIMUS99XJ]

I have a set of stock upper and lower control arms, coil springs and pitman arm of a 98 I lifted this past saturday make offers if wanted, also oe transfercase skid and front skid

[skoolie72]

I also have a Kenwood powered slimline subwoofer.
http://milwaukee.craigslist.org/ele/553326713.html
Link above.
$120 at WF.
That is all.

[Big Red]

Looking to buy:
If anyone has extra front XJ driveshafts I can use 1 or 2. I have a few that are pretty junked as spares and I use them in both my rigs front and rear.

I could use some front dana 30 axle shafts (96'+ with the 297 dana 44 sized u-joints) also a set of uni-hubs.

I'd be interested in 27 or 29 spline 8.25 axle shaft(s)

31 or 32" AT or MT tires (set of 4 or 5).

Have to sell:

Big Red is up for sale (pic in my avatar). I'm wheeling it and trailering it so bring $6,500 and it's yours!!!
(9" lift RE/SJ), HP44 5.38s/detroit/Yukon alloys/OX Trax u-joints/heavy duty steering-raised set up for hydro assist, 9" 5.43 gears/detroit/Yukon 35 spline alloys/nodular case, Rubi 241 4:1 t-case, Warn M8000 winch on a Newer Nate's 4x4 winch bumper/Custom rear bumper with tire carrier, 37" MTRs on old school beadlocks :gee:

I have a set of 4 33x10.50x15 TSL radials about 25% or so, nice deep side lug traction, but a little thin down the middle. I need to get $100 for them to bring them with me.

I also have a set of 4 30x9.50x15 BFG Long Terrain tires at 85% or better on XJ Sport 5 spokes that were rattle canned black--I'd need to get $250 to bring them...I'm looking to get 31 or 32" ATs or MTs for my 98' with my up and coming regear from the stock crappy 3.07s to 4.56s.

Troy

[mcnamaag]

I have a set of stock upper and lower control arms, coil springs and pitman arm of a 98 I lifted this past saturday make offers if wanted, also oe transfercase skid and front skid

PM'd ya on skids.

[XJ&CHZ4ME]

Big Red, i have a set of 27 spline 8.25 shafts and possibly even the spiders for them as well as a carrier if needed. I also have an extra D30 unit bearing or two around if that is what your looking for. I am interested in these 33x10.5x15's that you have...maybe a parts swap here??? Do you have a pic of the tires?? let me know so I can load things accordingly. We are leaving out @ 5 AM friday morning to head that way..

[mcnamaag]

I have a couple of vent windows and other misc door glass. If anybody needs it let me know and I will bring it.

[BRIANHO13]

I have a couple of vent windows and other misc door glass. If anybody needs it let me know and I will bring it.

Bring it, it's always worth a couple bucks after someone breaks one out on the trail.

[Jeepguy91]

I know that it is kinda late notice and all but does anybody have a spare rim i can get off of ya? Need one to mount on my spare that is 31x12.50x15. Had one coming but haven't gotten it yet and going by the required things for WF i have to have one and the only thing holding me up is the rim. If you have one let me know.

[XJ&CHZ4ME]

Yeah, I'll have one after I get the one off of skoolie72. I should be able to have ya covered.

[hanaxj87]

Bid Red , I have a set of good used dana 30 complete axle shafts with 297x u-joints. and abs rings. 50.00 Each or 100.00 for both. Good used XJ front drive shaft assy. for the front or rear with sye 75.00 . Thanks

[87manche]

I know that it is kinda late notice and all but does anybody have a spare rim i can get off of ya? Need one to mount on my spare that is 31x12.50x15. Had one coming but haven't gotten it yet and going by the required things for WF i have to have one and the only thing holding me up is the rim. If you have one let me know.
I don't have one that you can have, but I do have a 31x10.5 on a rim sitting outside, tread sucks, but it's a spare tire.
I can bring it if there's space in the Jeep.
Let me know ASAP, probably leaving around 3.