PDA

View Full Version : SHACKLE XJ REAR BOOMERANG 6"

XJmania030
October 22nd, 2007, 20:05
Never used just installed and my jeep didnt sit level so i put the stock ones back on. So basically New condition.

$90obo

Mike
themud
October 22nd, 2007, 22:20
whos shackles are they???
Id like to be first in line depending on whos they are and how much lift they give...
themud
XJmania030
October 23rd, 2007, 19:28
They are the Rubicon express boomerang shackles.
kemolewis
October 24th, 2007, 18:53
Any pics, and is it 6" of lift?
XJmania030
October 24th, 2007, 20:05
They dont give a full 6in of lift. Im not sure exactly how much but it was to much for me with my non saged leafs.
XJmania030
October 24th, 2007, 20:14
http://i172.photobucket.com/albums/w29/jeepinxj/shackles.jpg

Sorry its a crappy cell phone picture but i left the camera at my buddies.
chrslefty
October 24th, 2007, 21:57
im making a run to tuscan tomarow afternoon if somone need me to pick em up for them !!
CustomCrawler
October 24th, 2007, 22:05
These shackles provide a little over an inch of lift while giving XJ owners the ability to run a longer spring without damaging the body at the rear of the leaf spring. They feature greasable Zerk fittings, urethane bushings, and a durable black powdercoat finish. Each shackle is laser-cut from 3/16-inch steel plate and has MIG-welded seams for superior strength.
XJmania030
October 25th, 2007, 07:36
These shackles provide a little over an inch of lift while giving XJ owners the ability to run a longer spring without damaging the body at the rear of the leaf spring. They feature greasable Zerk fittings, urethane bushings, and a durable black powdercoat finish. Each shackle is laser-cut from 3/16-inch steel plate and has MIG-welded seams for superior strength.

thanks


ttt
kemolewis
October 25th, 2007, 18:23
These shackles provide a little over an inch of lift while giving XJ owners the ability to run a longer spring without damaging the body at the rear of the leaf spring. They feature greasable Zerk fittings, urethane bushings, and a durable black powdercoat finish. Each shackle is laser-cut from 3/16-inch steel plate and has MIG-welded seams for superior strength.

Sounds like someone read the broucher.
XJmania030
October 26th, 2007, 07:07
Sounds like someone read the broucher.

that or someone knows how to cut and paste.:doh:
kemolewis
October 26th, 2007, 18:18
How far did they hang down (clearance issues)
XJmania030
October 28th, 2007, 12:21
They dont hang down that much. I dont really remember. They wont cause and clearance issues
XJmania030
October 29th, 2007, 22:54
Sale pending
jeeperzcreeperz
November 29th, 2007, 09:38
If you still have these p/m me and let me know.
SOUTHTEXASXJ
December 10th, 2007, 16:23
are these sold or still up?
XJmania030
December 10th, 2007, 19:38
SOLD!!