Things to do

[RedHeep]

4.5 months to go . . .

Who has a list? Better yet, who's started on the list besides Randy?

Here's mine:

Must haves:
New steering
New Tcase
Bumpstops
Shocks
CB antenna mount
Fix rear bumper mounting
Shackle install
Detroit in the rear

Nice to haves:
Cage
Winch bumper
Front seats
Half doors

Josh

[IntrepidXJ]

Who has a list? Better yet, who's started on the list besides Randy?


i always have a list that i am working on.......event or not :gee:

[RedHeep]

i always have a list that i am working on.......event or not :gee:

I prefer to cram everything into the last week before I leave.

[Ramsey]

Find money
Find time off

Mine is short, but not the easiest to come by.

[87manche]

hmm, where to start.

MJ:
remove bed.
4 link rear
build new bed
fuel cell

It might be done, it might not be.

XJ
budget boost
new leaf springs
install detroit in the rear
swaybar discos
Drive it there so the wife can play in it.

[Prepmech]

My jeep is just about put back together, so all I need to do is find a new trailer now that it is too wide to fit on my old one.

[XJ&CHZ4ME]

Find money
Find time off

Mine is short, but not the easiest to come by.

This sounds very similar to my situation, but I must edit it a bit:

1. Find money (legally!)
2. Time...shhhiiiitttt...I got nuthin but time!

Hoping to make it there, but also looking to get the wife a new vehicle between now and then so it might screw up having a tow rig. We will see what happens.:cool:

[HaleYes]

I'd like to get a box similar to what the MWC Brewmister has in the cargo area. I still need to find a Co2 regulator. Need to get my powersteering issues lined out too.

Hale

[seanR]

Fire proof the side of the motorhome.....

[Ramsey]

terror proof it?


3.get spare tire for trailer, though I need to do that much sooner.

[w_howey]

1. Lower Control arms
2. Front tow points/winch bumper
2a. Repair winch contol box
3. Install EZ-Locker
4. Get the heater working
5. Put the doors on
6. make sure tow rig will make it
7. find cap/camper for tow rig
8. Other things I'm currently forgetting

[lesslimited]

Must do:
Brew a couple batches of homebrew.
Pick up a bottle or two of mezcal.
Fix the AC.

Optional:
Fix the leaking ARB locker.
Armor-all the tires.

[ILLXJ]

Need to do:
Install new tie rod- it's on the way
Install rear disc brakes
Install new spring kit in the No-Slip

Want to do:
Get a winch & new tires

JIM.

[macgyvr]

cut the front off the xj

rebuild

mac 'should be a fun winter' gyvr

[seanR]

2. Front tow points/winch bumper

Call me, I can fix you right up......

[XJ&CHZ4ME]

1. Build new rear bumper w/ tank skid incorporated into it
2. Tie in front bumper a bit more or maybe build a new one
3. Finish sliders
4. Lock the turdy
5. Reserve an oriental hooker

[BIGSLVRXJ]

5. Reserve an oriental hooker
I wish you would've had one of those when we were wheeling dammit!

[XJ&CHZ4ME]

I could have probably got a fat one for ya!!! Ya didnt ask!?!

[Ramsey]

1. Build new rear bumper w/ tank skid incorporated into it
2. Tie in front bumper a bit more or maybe build a new one
3. Finish sliders
4. Lock the turdy
5. Reserve an oriental hooker
I got 5$ on number 5.

[Rev Den]

Make hotel reservation....


hang on a min....


Done.


Rev

[IllianaXJ]

To Do:
1. Finish TNT LAs.
2. Install TNT trackbar.
3. Install front Aussie locker.
4. Fill CO2 tank.
5. Install SOLID diff cover on the 8.8.


Want to do:
Convince Pat to whip up another roof slider for me :D

[ILLXJ]

Want to do:
Convince Pat to whip up another roof slider for me :D

I think it's to late for that.:moon: JIM.

[BIGSLVRXJ]

I could have probably got a fat one for ya!!! Ya didnt ask!?!
Nah in that case I'll pass I s'pose :D.

[Roxtar]

Buy an XJ?






Make hotel reservation....


hang on a min....


Done.


RevGonna be a "shower with Rev" ticket in this year's raffle?

[sgtmack]

My list is pretty short;
1. Build long arm front suspension
2. Buy tires (33")
3. Lock the 8.25
4. Build roof rack
5. Finish rear bumper to fill in the cut quarters
6. TJ flares
7. etc., etc.

Ok, maybe it's not so short. I should at least have tires by then!

[IntrepidXJ]

try to get this thing done by then (too long of a list to post)....otherwise, I will be wheeling my 2000. at least I have a 'plan B' ;)

http://myxj.net/g2/d/101929-1/IMG_0006.JPG

[Rev Den]

Gonna be a "shower with Rev" ticket in this year's raffle?


Maybe.

Interested?

:smootch:

Rev

[Ramsey]

Put me down for 5 tickets.

[Big Hank]

This week I finished:

Front frame plating with 1/4" plate.
front shackle mounts finished.
all four spring plates 1/2 inch plate
shock mounts added to the d44

Rear frame plated at shackle mount.
Rear frame length shortened to 4 inches behind shackles
Shackle mounts 1/4" plate
shock mounts added to the d60


So here we go:

Seats
gauges
harnesses
roll cage
rebuild factory front bumper mounts using 3/8 plate
cut out entire floor pan and build custom floor from back wall to the firewall
brake booster and master cylinder for rear discs (got it)
locate hydraulic slave cylinder mounts for sm465 4spd transmission
mount all brake lines
front brake hoses
rear center hose
fuel cell install (got it)
drag link
tie rod
hydro assist
spool rear d60 probably do axle shafts, hate to spool without disired shafts
front locker of some kind.
install advance adapter small block motor mounts (got it)
install Tune Port Injected 350 (got it)
install Transmission and t case (got them)
install the Painless Wiring harness (got it)
find proper manifolds or shorty headers
y pipe and exhaust system with oxygen sensor
build cross member
traction bar
build square driveshafts unless i somehow find money for shafts
build flat bed
rocker replacement with possbily plate or box tube
one or two batteries
radiator hoses
cooling fan(s)
about 22 more lug nuts
shocks all the around
rear limiting straps to avoid breaking leaf springs
wrangler leaves with the proper amount of lift after the powertrain is in (currently stock)


pretty sure there is more but oh well. i've spent about 15 hours a week for the last two weeks and will probably continue to do at least that until its finished. Working again in a fab shop is such a great thing.

finally going to wheel again. Last event for the MJ was Winterfest 03.

Gene MJ

[ILLXJ]

To Do:
1. Finish TNT LAs.
2. Install TNT trackbar.
3. Install front Aussie locker.
4. Fill CO2 tank.
5. Install SOLID diff cover on the 8.8.


Want to do:
Convince Pat to whip up another roof slider for me :D

#3 is done.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM1016.jpg

JIM.

[w_howey]

1. Lower Control arms
2. Front tow points/winch bumper
2a. Repair winch contol box
3. Install EZ-Locker
4. Get the heater working
5. Put the doors on
6. make sure tow rig will make it
7. find cap/camper for tow rig
8. Other things I'm currently forgetting

4. Heaters works :rof:
8. Replace the trashed front U-joint

[IllianaXJ]

#3 is done.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM1016.jpg

JIM.

YOU DA MAN! The 2 quarts of gear oil in my truck caught my eye this morning and I kicked myself for not leaving them in the Jeep.

Still using that HP camera, eh?

[HaleYes]

The 2 quarts of gear oil in my truck caught my eye this morning and I kicked myself for not leaving them in the Jeep.


No worries.
I left a big ol' 3 gal. jug at Jim's.


Hale

[xj4life]

supprisingly my Jeep survived the year pretty good so i've got a pretty short list this winter.

1) order new driveshaft
2) change fluids
3) general check
4) traction bar if i can find the money
5) wash the years mud off
6) wait until WF

[XJ_ranger]

1) Learn how to drink an Irish Car Bomb the right way.


I think thats it... :fuse:

[Roxtar]

1) Learn how to drink an Irish Car Bomb the right way.


I think thats it... :fuse:Is there a wrong way?

[85xjwoody]

Depends on which jeep I will be bringing. The woody needs a few things and so does the black beast.

List for the woody:

MPI swap
new tranny and tranfer case
weld up the 8.8
front tow points installed
t/c skid plate(no more holes in the t/c)
install a radio that works
install 4.5" springs with spacer
install new control arms
install shackles out back

I'm sure there is more. If I bring the 96 the list is not so long.

Kim

[steelmen]

alot.

[Ramsey]

1) Learn how to drink an Irish Car Bomb the right way.


I think thats it... :fuse:
Those are mighty tasty, how the hell did you screw it up.

[alwaysready]

hmmm
lift needs to be installed
wheels need to be installed
winch bumper needs to be installed
winch needs to be installed
OBA needs to be installed
SYE needs to be bought and installed
sliders needs to be bought and installed
front locker needs to be bought and installed
thats it not bad

Quote:
Originally Posted by XJ_ranger
1) Learn how to drink an Irish Car Bomb the right way.


I think thats it... :fuse:


And i thought you were supposed to run from them :D

[IllianaXJ]

Thanks to Jim, #1 on my list is closer to completion:

http://i6.photobucket.com/albums/y249/ILLXJ/other/HPIM1020.jpg
http://i6.photobucket.com/albums/y249/ILLXJ/other/HPIM1017.jpg
http://i6.photobucket.com/albums/y249/ILLXJ/other/HPIM1019.jpg

I can't thank him enough :D

[ILLXJ]

Thanks to Jim, #1 on my list is closer to completion:

http://i6.photobucket.com/albums/y249/ILLXJ/other/HPIM1020.jpg
http://i6.photobucket.com/albums/y249/ILLXJ/other/HPIM1017.jpg
http://i6.photobucket.com/albums/y249/ILLXJ/other/HPIM1019.jpg

I can't thank him enough :D

We'll figure something out.:gag: JIM.

[XJ_ranger]

Those are mighty tasty, how the hell did you screw it up.

I didnt understand the 'drop it in' was literal... and poured the cream and whiskey into the guiness... :tear:

But I was too drunk to notice the difference after 1 kamakazie, 1 tequilla shooter, 2 black superman's and 1 mind eraser...

[Ramsey]

You poured it in huh, silly newbie.

[bmyohn]

Things to do:
1) TnT Customs Longarms
2) TnT Customs Trac Bar
3) TnT Customs OTK Steering
4) TnT Customs UBEs
5) Rock Krawler 6.5" Coils
6) Swap in Ford 8.8" w/ discs
7) Swap in HP D30 w/ TnT Customs Truss (95 cherokee)
8) 35" Maxxis Bighorns
9) 4.88s
10) OX Lockers front and rear
11) Front and Rear (tire carrier rear) bumpers from AJ

long expensive list, but the first 7 will be done by thanksgiving hopefully

[Big Hank]

Front frame plating with 1/4" plate..........:clap:
front shackle mounts finished.........:clap:
all four spring plates 1/2 inch plate.......:clap:
shock mounts added to the d44........:clap:
Rear frame plated at shackle mount..........:clap:
Rear frame length shortened to 4 inches behind shackles........:clap:
Shackle mounts 1/4" plate.......:clap:
shock mounts added to the d60........:clap:
Seats
gauges
harnesses
roll cage
rebuild factory front bumper mounts using 3/8 plate..........FINISHED:clap:
cut out entire floor pan and build custom floor from back wall to the firewall
brake booster and master cylinder for rear discs (got it)
locate hydraulic slave cylinder mounts for sm465 4spd transmission
mount all brake lines
front brake hoses
rear center hose
fuel cell install (got it)
drag link
tie rod
hydro assist
spool rear d60 probably do axle shafts, hate to spool without disired shafts
front locker of some kind.
install advance adapter small block motor mounts (got it)
install Tune Port Injected 350 (got it)
install Transmission and t case (got them)
install the Painless Wiring harness (got it)
find proper manifolds or shorty headers
y pipe and exhaust system with oxygen sensor
build cross member
traction bar
build square driveshafts unless i somehow find money for shafts
build flat bed
rocker replacement with possbily plate or box tube
one or two batteries
radiator hoses
cooling fan(s)
about 22 more lug nuts
shocks all the around and mounts.............FINISHED:clap:
rear limiting straps to avoid breaking leaf springs
wrangler leaves with the proper amount of lift after the powertrain is in (currently stock)


got a lot done this last week, figured I would start putting the happy smiley next to things that are finished. also going to have to switch from two to three nights a week to get this thing done.

[macgyvr]

got a lot done this last week, figured I would start putting the happy smiley next to things that are finished. also going to have to switch from two to three nights a week to get this thing done.


hurry...

mac 'started the front frame conversion tonight' gyvr

[kndrewa]

my steering gear has got to be shot... ...well i have a horrible leak and have just been 'topping her off' all summer.
but even when topped off these days, it whines like a mother.
so i guess its either my pump or the gear.
i want to upgrade 'dakota-style.'
that is my goal for before winterfest.
i havent picked anything up yet.
might as well get new lines for the pump, etc, eh?
any suggestions?
words of wisdom.
whatever?

[IntrepidXJ]

Thanks to Jim, #1 on my list is closer to completion:


hey Jim......want to do another? Not because I can't myself....just because I'm lazy :looney:

:wave:

[IllianaXJ]

Heh, I doubt it. Of course, if you have successfully removed your transmission crossmember without bolt breakage, then yours would be 10x easier than mine.

I fully expected to let my XJ sit outside Jim's shop until I came back to finish her up, but next thing I know he PMed me progress pics. What a guy!

http://www.midwestxj.org/forum/images/smilies/beerchug.gif

[IntrepidXJ]

Heh, I doubt it. Of course, if you have successfully removed your transmission crossmember without bolt breakage, then yours would be 10x easier than mine.

yep, my crossmember has already been removed :)

[IllianaXJ]

Then you are already 1 day ahead.

$%#&! Indiana road salt :D

[ILLXJ]

hey Jim......want to do another? Not because I can't myself....just because I'm lazy :looney:

:wave:

The next one I do I'll have to charge more than the kit cost.:looney: JIM.

[ILLXJ]

Need to do:
Install new tie rod- it's on the way
Install rear disc brakes
Install new spring kit in the No-Slip

Want to do:
Get a winch & new tires

JIM.

I have to add install header & new intake. Also remove new tires from the list, I have a feeling the TrXus are gonna last alot longer than I thought. JIM.

[87manche]

well, the wife's XJ is on it's way.

I've got most of the body work done, so I can start on the rocker replacements soon.
It runs right, got the 4wd actuator fixed.
gotta do maintenance crap like u-joints.
Gotta budget boost this thing with new leaf packs.
install hale's bumper in the parking lot.

[HaleYes]

I'd like to get a box similar to what the MWC Brewmister has in the cargo area. I still need to find a Co2 regulator. Need to get my powersteering issues lined out too.

Hale

I need to install the 99+ intake I got from Byron.

Still haven't got the power steering figured out yet. I'm about to give up on it.........fuggin' thing.:bawl: I'd like to have my rock lights and new front bumper on too.

Hale

[Ramsey]

Any night wheeling go down at winterfest? Or is it just too damn cold.

[HaleYes]

Any night wheeling go down at winterfest?

Anything is possible.

However, our night run at Flat Nasty didn't turn out so well.

I've had these lights for a while now, I'd just like to get them out of my way.


Hale

[Ramsey]

What is the weather like up there usually.

[HaleYes]

What is the weather like up there usually.

Carhartt.

[Ramsey]

Like I know what that means.

[HaleYes]

Like I know what that means.

Here. (http://www.carhartt.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10051&catalogId=10101&langId=-1&top_category=15056&categoryId=10926)

[Ramsey]

:doh: I know what carhartt is.

I guess it would be too much for someone to throw out a number.

[IllianaXJ]

20s-40s

[IllianaXJ]

I need to install the 99+ intake I got from Byron.

Still haven't got the power steering figured out yet. I'm about to give up on it.........fuggin' thing.:bawl: I'd like to have my rock lights and new front bumper on too.

Hale


That's why it was sitting in the shed instead of on the Jeep :D



Here's a link to some of the fancier CO2 regulators, I have the fixed one on my tank:

http://www.offroadairstore.com/servlet/Categories?category=HiFLO+Regulators

And here's a cheaper price on the fixed reg: (scroll down)

http://www.wheelersoffroad.com/co2systems.htm

I'm probably just going to run a small adjustable regulator inline if I want to use air tools, etc.

[HaleYes]

That's why it was sitting in the shed instead of on the Jeep :D


The intake will bolt right up to mine no problem, as I have a 96.

I have seperate PS issues. I did the pump orafice mod and it's not quite right. It sticks sometimes and then I'm turning and all of a sudden I have no PS at all. PIA. I can return it to it's stock condition, but I'd rather not. I can tell a difference at low RPM's and I like it. Something just not quite right, and I haven't figured out what.....yet.:D

Thanks for the links.


Hale

[IllianaXJ]

Ok, I thought you meant figuring out bolting up the PS stuff to the intake. Linky for the pump mod? May have to look into that.

I may be talked out of my regulator as an excuse to upgrade to an adjustable :D

[Ramsey]

20s-40s
That doesnt seem too bad, was expecting worse being so far up north.

[Rev Den]

Don't forget about the wind......

:D

Rev

[Ramsey]

Your "husky" I'll just cuddle up next to you.

[HaleYes]

Ok, I thought you meant figuring out bolting up the PS stuff to the intake. Linky for the pump mod? May have to look into that.


I thought that might me what you were referring to.
Here is the writeup for the PS pump:
http://westtexasoffroad.homestead.com/powersteering.html

Hale

[IllianaXJ]

To Do:
1. Finish TNT LAs.
2. Install TNT trackbar.
3. Install front Aussie locker.
4. Fill CO2 tank.
5. Install SOLID diff cover on the 8.8.



Add to the list:

6. New front shocks
7. BPEs and shock conversion
8. Limit straps

[87manche]

Your "husky" I'll just cuddle up next to you.
wanna borrow a weiner to stuff in your sleeping bag?

[Ramsey]

wanna borrow a weiner to stuff in your sleeping bag?
Hell Yeah, or maybe your wife?

[Pat]

FYI...no night runs at the Badlands...

[w_howey]

1. Lower Control arms
2. Front tow points/winch bumper
2a. Repair winch contol box
3. Install EZ-Locker
4. Get the heater working
5. Put the doors on
6. make sure tow rig will make it
7. find cap/camper for tow rig
8. Other things I'm currently forgetting



4. Heaters works :rof:
8. Replace the trashed front U-joint

5. Doors are on!!!!(they aren't pretty, and close kinda...)
8. Work on cargo area. (figure out way to stuff all the stuff in there)
8. Where to put the spare.

[IllianaXJ]

To Do:
1. Finish TNT LAs. :thumbup:
2. Install TNT trackbar.
3. Install front Aussie locker. :thumbup:
4. Fill CO2 tank.
5. Install SOLID diff cover on the 8.8.
6. New front shocks.
7. BPEs and shock conversion.
8. Limit straps.
9. Install new muffler.

Two steps forward, more steps added :rolleyes:

[Pat]

what I would LIKE to have done by WF:

1. replace motor mounts
2. synthetic winch rope
3. new seats and harnesses
4. cage work for #3 and some other pieces
5. raise rear shock mounts
6. new rear shocks
7. rocker replacement
8. plate frame rails
9. new crossmember/skid?
10. clear spot to work on jeep...

#1 is the only required.

better get busy...

[ILLXJ]

I have to add install header & new intake. Also remove new tires from the list, I have a feeling the TrXus are gonna last alot longer than I thought. JIM.

Header & intake are on. Winch has been ordered. JIM.

[87manche]

Hell Yeah, or maybe your wife?

she'll be flattered you asked.

STILL doing bodywork on the wife's Jeep.

I fawkin hate body work.

[IntrepidXJ]

Header & intake are on. Winch has been ordered. JIM.

you should have been wheeling instead or worrying about that crap :confused1

[HaleYes]

you should have been wheeling instead or worrying about that crap :confused1

Agreed!!!

:twak:

[specdave]

Speaking of wheeling are we making a trip to redbird this month seems like we went in november last year

[HaleYes]

Speaking of wheeling are we making a trip to redbird this month seems like we went in november last year

This is a WINTERFEST thread, not Redbird.

Geez.....


You'll have to excuse him fellas, he used to ride the short bus.:rolleyes:


Hale

[sgtmack]

Well, my list just got longer. Sounds like a rear pinion bearing noise. I just hope it's a bearing and not a gear problem. :bawl:

And the rear brakes are shot.
And the fronts aren't so great either.
Oh well, it's only money.

So, when are we going to Redbird?

[IllianaXJ]

Speaking of wheeling are we making a trip to redbird this month seems like we went in november last year
We (read:you) should be wheeling at Redbird in a 91 XJ with your name on the title :wave1:

I'll be at Redbird the 18th (Sun) and the 23rd (Friday before Thanksgiving) working the gate if you want to stop in and say hey.

[/hijack]

On topic, I should be knocking a few more things off the list this weekend.

[IntrepidXJ]

i guess i should install this stuff before Winterfest.....

http://myxj.net/g2/d/110455-1/IMG_0449.JPG

...of course, I'm not planning on bringing that Jeep, though

[BRIANHO13]

ok I'll play.

1 fix ram assist and steering gear
2 remove doors
3 maybe boatside a bit
4 add some to the cage
5 install seats
6 maybe find a front 60, and bigger tires.

[Roxtar]

ok I'll play.

1 fix ram assist and steering gear
2 remove doors
3 maybe boatside a bit
4 add some to the cage
5 install seats
6 maybe find a front 60, and bigger tires.Do a front 60 by WF?!
You forgot one.
5.5 quit my job

[BRIANHO13]

Do a front 60 by WF?!
You forgot one.
5.5 quit my job
Nah, finding one would be the hard part, the rest is easy.

[IllianaXJ]

To Do:
1. Finish TNT LAs. :thumbup:
2. Install TNT trackbar.
3. Install front Aussie locker. :thumbup:
4. Fill CO2 tank.
5. Install SOLID diff cover on the 8.8. :thumbup:
6. New front shocks.
7. BPEs and shock conversion.
8. Limit straps.
9. Install new muffler. :thumbup: (works pretty good for the $25 I have in it)

http://i61.photobucket.com/albums/h76/bfourman/01XJ/HPIM0856.jpg

http://i61.photobucket.com/albums/h76/bfourman/01XJ/HPIM0862.jpg

[ILLXJ]

Need to do:
Install new tie rod- it's on the way
Install rear disc brakes
Install new spring kit in the No-Slip

Want to do:
Get a winch & new tires

JIM.

Just waiting on the tie rod & winch. JIM.

[XJ&CHZ4ME]

got the SYE on its way and the sliders just about completed.....slowly but surely getting the list narrowed down.

[87manche]

add "fix gigantic fuel leak that just cost me $100 in gas" to the list.

[BRIANHO13]

I have yet to do anything to mine, and am getting requests to help others with thiers.

[Rev Den]

add "fix gigantic fuel leak that just cost me $100 in gas" to the list.

PLEASE

fix this before the campfire.

before you go on a trail and ask me later to check your tank....'cause it smells like leaking gas.

:D

Rev

[IllianaXJ]

Due to my impulsive nature, I now have a TeraLow 4:1 and a 2Low kit to install. It's not high on the priority list, more of a FF08 item :D

[kunaji]

PLEASE

fix this before the campfire.

before you go on a trail and ask me later to check your tank....'cause it smells like leaking gas.

:D

Rev

Uhmmm... x2!!!!

[87manche]

Uhmmm... x2!!!!
you're one to talk!

[kndrewa]

things to do..


... uhhh .. lets see...


number 1: get a job.

yep, thats a big enough task for now..

[XJ_ranger]

Due to my impulsive nature, I now have a TeraLow 4:1 and a 2Low kit to install. It's not high on the priority list, more of a FF08 item :D

do you have an AW4 or AX-15?

[ILLXJ]

do you have an AW4 or AX-15?

AW4. JIM.

[RedHeep]

Must haves:
New steering
New Tcase
Bumpstops
Shocks
CB antenna mount
Fix rear bumper mounting
Shackle install
Detroit in the rear

Josh

Dana 300 in the garage. Have to flip it, twin stick it and get it in.

Josh

[BRIANHO13]

ok I'll play.

1 fix ram assist and steering gear
2 remove doors
3 maybe boatside a bit
4 add some to the cage
5 install seats
6 maybe find a front 60, and bigger tires.

Found a front 60 will be delivered to me at wf, so #6 will not be completed. not started on anything else.

[macgyvr]

well don't have much to do...well...just a little fabing...

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/DSCF0096.jpg

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0010.jpg

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0019.jpg

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0020.jpg

mac 'some more tube coming' gyvr

[BRIANHO13]

well don't have much to do...well...just a little fabing...

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/DSCF0096.jpg

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0010.jpg

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0019.jpg

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0020.jpg

mac 'some more tube coming' gyvr

you are my inspiration.

[macgyvr]

More progression. Started a thread in the NAXJA fab forum if anyone cares to follow.

http://www.naxja.org/forum/showthread.php?p=243673751#post243673751

Also the photo album with all the photos can be found here

http://s215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/?start=0

One last pic of last nights progression.

http://i215.photobucket.com/albums/cc74/macgyvr/Jeep%20Buggy/2007-8%20front%20build/DSCF0032.jpg

mac 'down and dirty' gyvr

[ILLXJ]

Tie rod is on. Building the winch mount now.
http://i5.tinypic.com/8fmx6ds.jpg

http://i5.tinypic.com/7xl7f9t.jpg

http://i17.tinypic.com/8fxefe8.jpg

http://i5.tinypic.com/810711c.jpg

Just have to finish making some gussets & weld it all together. JIM.

[Ramsey]

Should cut the grill and suck in that winch.

[Pat]

you are my inspiration.
there's trouble...

[HaleYes]

you are my inspiration.

You give meaning to my life.........

[XJ_ranger]

You give meaning to my life.........

there's trouble...

[HaleYes]

You give meaning to my life.........
you are my inspiration.

http://www.youtube.com/watch?v=F0jFSQp-Kw8

[HaleYes]

http://i19.photobucket.com/albums/b176/haleyes1/101_4158.jpg
Add this to my list.
Sometimes, I like my place of employment.:D

[Pat]

Add this to my list.
Sometimes, I like my place of employment.:D
How much did you get paid to make those?

[HaleYes]

How much did you get paid to make those?

Not near enough......not near enough.;)

[ILLXJ]

Should cut the grill and suck in that winch.

Like this?

http://i16.tinypic.com/6y30nqc.jpg

JIM.

[Ramsey]

Plenty more room to go back, but not too bad.

[ILLXJ]

Plenty more room to go back, but not too bad.

Not with the trans. & PS coolers. They're kinda big. It has 4.75" overhanging the edge of the bumper, approx. 7" from the grill. I know of alot of bumpers that stick out farther & hang alot lower. I'm happy with it for now. JIM.

[bmyohn]

Things to do:
1) TnT Customs Longarms :star:
2) TnT Customs Trac Bar :star:
3) TnT Customs OTK Steering :star:
4) TnT Customs UBEs :star:
5) Rock Krawler 6.5" Coils :star:
6) Swap in Ford 8.8" w/ discs :star:
7) Swap in HP D30 w/ TnT Customs Truss (95 cherokee) :star:
8) 35" Maxxis Bighorns
9) 4.88s
10) OX Lockers front and rear
11) Front and Rear (tire carrier rear) bumpers from AJ

long expensive list, but the first 7 will be done by thanksgiving hopefully

1 - 7 done

probably wont have the others done in time though
http://i131.photobucket.com/albums/p307/bmyohn/IMG_4862.jpg
http://i131.photobucket.com/albums/p307/bmyohn/IMG_4865-2.jpg

[seanR]

I got tired of scraping ice off the Expy every morning so I moved the Heep outside.
Well I broke my steering gear box, yes I broke my steering gear box, in my driveway!
I haven't looked at it yet to see why it wont turn, I am afraid to.
So add that to my list.

[BRIANHO13]

I got tired of scraping ice off the Expy every morning so I moved the Heep outside.
Well I broke my steering gear box, yes I broke my steering gear box, in my driveway!
I haven't looked at it yet to see why it wont turn, I am afraid to.
So add that to my list.

Might as well add ram assist while you have it out.

[RedHeep]

I got tired of scraping ice off the Expy every morning so I moved the Heep outside.
Well I broke my steering gear box, yes I broke my steering gear box, in my driveway!
I haven't looked at it yet to see why it wont turn, I am afraid to.
So add that to my list.

I put a durango box in when mine was shot. Got rid of the variable steering and is a bigger box.

[LBEXJ]

I got tired of scraping ice off the Expy every morning so I moved the Heep outside.
Well I broke my steering gear box, yes I broke my steering gear box, in my driveway!
I haven't looked at it yet to see why it wont turn, I am afraid to.
So add that to my list.

I popped the heads off the steering box mounting bolts one day in town. I yanked the steering wheel and they could not take the pressure. I had to use a big C-clamp to hold the gearbox against the framerail so I could get it off the street.

Hopefully it's not too serious.

Les

[HaleYes]

I popped the heads off the steering box mounting bolts one day in town. I yanked the steering wheel and they could not take the pressure. I had to use a big C-clamp to hold the gearbox against the framerail so I could get it off the street.

Hopefully it's not too serious.

Les

Hey it's Wildman!

Ain't seen you around for a while!

Good to see ya!

[LBEXJ]

Hey it's Wildman!

Ain't seen you around for a while!

Good to see ya!

I've kinda been in "survival mode" for a while now, so my heads been in several places (tryin' to keep it outta my ass) :D

Les

[Ramsey]

I've kinda been in "survival mode" for a while now, so my heads been in several places (tryin' to keep it outta my ass) :D

Les
What was her name?

[w_howey]

I got tired of scraping ice off the Expy every morning so I moved the Heep outside.
Well I broke my steering gear box, yes I broke my steering gear box, in my driveway!
I haven't looked at it yet to see why it wont turn, I am afraid to.
So add that to my list.

If you need a hand, call..... I'm quickly running out of weekends with rather free days....

[XJMK]

I need to fix my rear window sprayer, never worked since I got it. :cry:

Also need to figure out why my steering is so danged loose. I'm hoping its the Rusty's tracbar (I'm replacing the frame side bushing with a johnny joint) or some tre's, and not the steering box.

[XJ&CHZ4ME]

Just got the new JCR steering for the rig. Hoping to get a chance to work on it this weekend before the big Holiday madness starts. I think "Santa" is bringing me a Aussie for the front too....

[BRIANHO13]

Picking up 1 tons tomorrow
and 42"s on Wednesday :D

[HaleYes]

Picking up 1 tons tomorrow
and 42"s on Wednesday :D

Sweetness!:thumbup:

Gonna have it together before WF?

[BRIANHO13]

Sweetness!:thumbup:

Gonna have it together before WF?

gonna give it a shot

[Ramsey]

What tires you going with?

[XJ&CHZ4ME]

What tires you going with?
30 x 9.50's in the front and 42's in the rear..you know, so it is jacked up in ther back to make it go real fast! :D

[BRIANHO13]

What tires you going with?

Guy in cinci had a brand new set of iroks fo sale, cheap.

[IntrepidXJ]

i guess i should install this stuff before Winterfest.....

http://myxj.net/g2/d/110455-1/IMG_0449.JPG

...of course, I'm not planning on bringing that Jeep, though

well, all i need to do to the 2000 is put the rock rails back on at this point

[kndrewa]

well, all i need to do to the 2000 is put the rock rails back on at this point

alright, its been six hours... ...you got em on?

lets see how she looks, i know you wanted to wait for a pic to get the rails on.

i dont have the pleasure of seeing your rig at winterfest, you know..

[HaleYes]

http://i19.photobucket.com/albums/b176/haleyes1/101_4158.jpg
Add this to my list.
Sometimes, I like my place of employment.:D

Complete.

[specdave]

Be careful remember the people in salem

[HaleYes]

Be careful remember the people in salem

You talking about the copper thieves?

[HaleYes]

I need to install the 99+ intake I got from Byron.

Still haven't got the power steering figured out yet. I'm about to give up on it.........fuggin' thing.:bawl: I'd like to have my rock lights and new front bumper on too.

Hale

I'm holding off on the intake for now. Powersteering kinda cured itself, and the bumper has been on for a while now......

Rocklights are 95% complete. I need to get some female spade connectors and they'll be done.

Hale

[XJ&CHZ4ME]

1. Build new rear bumper w/ tank skid incorporated into it Still working on it
2. Tie in front bumper a bit more or maybe build a new one Done
3. Finish sliders Done
4. Lock the turdy waiting for tax return
5. Reserve an oriental hooker Done (multiple times :D)

[IllianaXJ]

I'm holding off on the intake for now. Powersteering kinda cured itself, and the bumper has been on for a while now......

Rocklights are 95% complete. I need to get some female spade connectors and they'll be done.

Hale

Rocklights eh? I'm gonna need some pics of those.

I'm getting closer to completing my list, trackbar is going to get done soon and the CO2 tank is at Airgas waiting to be filled. Shocks and BPEs are going to wait. If I can scrounge a Waggy pitman arm to correct my steering, I'll be doing good.

[BRIANHO13]

ok I'll play.

1 fix ram assist and steering gear going full hydro so it will be fixed
2 remove doors might not happen
3 maybe boatside a bit might not happen
4 add some to the cage probably
5 install seats probably
6 maybe find a front 60, and bigger tires. working on new axles now and have the bigger tires

[XJMK]

Also need to figure out why my steering is so danged loose. I'm hoping its the Rusty's tracbar (I'm replacing the frame side bushing with a johnny joint) or some tre's, and not the steering box.

Turns out my TB axle mount was wallowed out. Opened it up and put in a new bolt.

Now I'd like to get the exhaust repaired, by replacing it all. I think the only good part is between the headers and the cat. I'm also going to get the trans and tcase oil changed at Iffy-Lube, because I'm lazy.

[HaleYes]

Rocklights eh? I'm gonna need some pics of those.


I have one on both sides in the front (same place on both sides) and one for the rear.

http://img.photobucket.com/albums/v647/haleyes/101_4235.jpg

http://img.photobucket.com/albums/v647/haleyes/101_4236.jpg

[IllianaXJ]

Nice lights! I forsee a f/r pair in my future as well :D


I need to add a rear pinion seal to my list. Started leaking same time I put the Solid cover on. Go figure.

[ILLXJ]

Nice lights! I forsee a f/r pair in my future as well :D


I've got 3 extra. JIM.

[IllianaXJ]

Mike has 4 with my name on it :D

Do you have yours mounted in the same spot?

[HaleYes]

Mike has 4 with my name on it :D

Do you have yours mounted in the same spot?

Very similar. His are mounted to the "grill" on his bumper and point outward.
The rear light is the same as mine.

[IllianaXJ]

To Do:
1. Finish TNT LAs. :thumbup:
2. Install TNT trackbar.
3. Install front Aussie locker. :thumbup:
4. Fill CO2 tank. :thumbup:
5. Install SOLID diff cover on the 8.8. :thumbup:
6. New front shocks.
7. BPEs and shock conversion.
8. Limit straps.
9. Install new muffler. :thumbup:

Getting down to crunch time! Items 6-8 are going to have to wait. I'm hoping to get the trackbar in this week.

Of course, there are a few little things to do; hook up the e-brake, install a Waggy steering arm so I can turn left again (no more 5 point turns to get into a parking spot :rolleyes:) and install a smaller pulley on the alt. for more idle amps.

[IntrepidXJ]

put my rock rails back on is all I have left to do.....my 92 will not be ready in time....

[seanR]

Fix welder so I can fix jeep...
Find time to fix welder so I can fix jeep...
Find time to fix welder so I can find time to fix jeep....

[w_howey]

Fix welder so I can fix jeep...
Find time to fix welder so I can fix jeep...
Find time to fix welder so I can find time to fix jeep....

If my 110volt wire welder will do the job, its yours....

[stupidweirdo]

Uhg. Gotta mess with the front axle yet too, seals, axle shafts and another set of stock LCA. heh

http://www.ilostmymind.com/upload/xjcutcell.jpg

And im totally installing the hippy gas pedal when it's done being my jig. :peace:

[Dirk Pitt]

Guess I should do something about this hole where the pinion used to be.

http://i260.photobucket.com/albums/ii17/AdamDowling/Dana%2030/11.jpg?t=1202760600

[HaleYes]

Regearing?

[Prepmech]

I've been using my rig as my DD lately, so I've got it running and all of the bugs worked out finally.

I still need to remove my bushwackers as they like to hug trees, and put some smaller wheels and tires on it so it will fit on my trailer.

[Dirk Pitt]

Regearing?

All new bearings, same gears.

[Rev Den]

I still need to remove my bushwackers as they like to hug trees, .

Sean can handle that for you...he is good at removing Bushwackers.

He could give you some trailering tips also. :D

Rev

[macgyvr]

Buggy not going to make it to winterfest again...however I will still be wheelin a rig...

http://i215.photobucket.com/albums/cc74/macgyvr/Baby%20Jeep/is_00126.jpg

The baby jeep will be making its first appearence off road at the badlands. Should be fun. Running 31 tsls, detroit locker rear, detroit tru trac front, jks discos, the old buggy jeep winch on a multimount, gas tank skid plate, custom air intake setup, optima and many more leftover parts from over the years...

only thing left is grooving the tsls, swapping some rims, and maybe a fabbed up tcase skid plate...

mac 'second trail ready jeep' gyvr

[XJ&CHZ4ME]

Originally Posted by XJ&TJ4ME
1. Build new rear bumper w/ tank skid incorporated into it Still working on it
2. Tie in front bumper a bit more or maybe build a new one Done(built a new one)
3. Finish sliders Done
4. Lock the turdy on its way
5. Reserve an oriental hooker Done (multiple times :D)

also installed JCR's 1 ton steering, new RC control arm drop brackets,PORC's SYE kit and DS, new air intake and a few other odd ball things.

I guess I should start checkin out my trailer to make sure everything is up to snuff on it......

[BRIANHO13]

ok I'll play.

1 fix ram assist and steering gear will be fully hydro
2 remove doors yup
3 maybe boatside a bit not gonna worry about it, she sits pretty high as is
4 add some to the cage will happen
5 install seats kinda has to happen now
6 maybe find a front 60, and bigger tires. check

mac you disapoint me
http://i26.tinypic.com/34igz1l.jpg

[macgyvr]

mac you disapoint me


sorry...im bummed too but at least im not bumming a ride

buying a house doesnt help anything either

mac 'one of these years' gyvr

[IllianaXJ]

My list is pretty much completed. Trackbar is in, pitman arm is on and e-brake is hooked up.

Now all I have to do it wait.

[w_howey]

1. Lower Control arms *Done Finally*
2. Front tow points/winch bumper
2a. Repair winch contol box *wife told me to buy a new winch*
3. Install EZ-Locker
4. Get the heater working *Done*
5. Put the doors on *Done*
6. make sure tow rig will make it
7. find cap/camper for tow rig *staying at the Inn*
8. Other things I'm currently forgetting
8. Replace the trashed front U-joint *Done*
8. Work on cargo area. (figure out way to stuff all the stuff in there)
8. Where to put the spare. *Ratchet straps*
8. Replace muffler
8. Leaking rear wheel cylinder

Seems like I finish one thing and add two....

[jcshaney]

what is the prefered spot for the flag at the bad lands front or rear. I would like to put on the back just so I dont have to look at it all day. just want to fallow the rules.

[IllianaXJ]

Doesn't matter, it is just supposed to be 2' taller than your rig. I used to zip-tie mine to the radio antenna and nobody ever said anything, so I would imagine as long as you have one you should be fine.

[HaleYes]

My list is pretty much completed. Trackbar is in, pitman arm is on and e-brake is hooked up.

Now all I have to do it wait.

Wish I could have stuck around longer but, I'm glad you got it all done. Did the belly pan go back on fairly uneventful?

[xj4life]

well i found out my knee surgery is getting delayed so i'm on for sure. not much of anything to get done on the jeep, truck, or trailer. guess just get the jeep packed and strapped onto the trailer.

[IllianaXJ]

Wish I could have stuck around longer but, I'm glad you got it all done. Did the belly pan go back on fairly uneventful?

Yep, it fit into place just like it should have the first time :dunce: I didn't even have to re-adjust my t'case linkage. The Heep rode like a dream on the way back home with the new trackbar too.

[HaleYes]

well i found out my knee surgery is getting delayed so i'm on for sure. not much of anything to get done on the jeep, truck, or trailer. guess just get the jeep packed and strapped onto the trailer.

Sweet!

Now we don't need any knee injuries at WF again. So....be careful! Last LawnCher fubared his knee which let to surgery. Be careful!:)

[xj4life]

Sweet!

Now we don't need any knee injuries at WF again. So....be careful! Last LawnCher fubared his knee which let to surgery. Be careful!:)

i'm more afraid of what my wife would do to me if i f'd it up worse. so i'll be on my best behavior :)

[w_howey]

8. Replace muffler *Done*
8. Leaking rear wheel cylinder

Seems like I finish one thing and add two....


8. Replace interior door handle *Done*
8. Do something about the damn saggy headliner.

[IllianaXJ]

8. Do something about the damn saggy headliner.
http://www.jwodcatalog.com/imgLg/7510002726887.jpg

[HaleYes]

http://www.jwodcatalog.com/imgLg/7510002726887.jpg

Meeahh, just pull it out. Recover it when it warms up.

Mine hasn't got bad enough to pull down yet. When it does, it's going Realtree.:D

[XJ&CHZ4ME]

Meeahh, just pull it out. Recover it when it warms up.

Mine hasn't got bad enough to pull down yet. When it does, it's going Realtree.:D

so if you put in a camoflauge headliner..would that kind of be like not putting one in there since you wont be able to see it??? :D

[lesslimited]

Must do:
Brew a couple batches of homebrew. Done
Pick up a bottle or two of mezcal. Done
Fix the AC. not looking good

Optional:
Fix the leaking ARB locker. maybe
Armor-all the tires. I really need new tires!

And my heep has developed some serious front end problems including a non-death wobble type wobble that sometimes turns into death wobble, and sticky calipers.

[Pat]

what I would LIKE to have done by WF:

1. replace motor mounts - :guitar:
2. synthetic winch rope - :guitar:
3. new seats and harnesses
4. cage work for #3 and some other pieces
5. raise rear shock mounts
6. new rear shocks
7. rocker replacement
8. plate frame rails
9. new crossmember/skid?
10. clear spot to work on jeep... - :guitar:

#1 is the only required.

better get busy...

Also put a new trac-bar in. That's all for now. Other than organizing some tools, it's ready to go on the trailer.

[HaleYes]

http://img.photobucket.com/albums/v647/haleyes/101_4279.jpg
Rope and hawse is on.
I'm not going to attempt to get anyting else done. Got a few little piddly things, but fawk it. I just need to pack up....and remember all the stuff I've told people I'd bring.:looney:

[HaleYes]

I should have added that I got the DPG Trailgunner coils in last weekend as well. Wow, what a difference. I've yet to wheel with them but I can tell a huge difference on the road. Good stuff. :thumbup:

[bshaw]

1. get the jeep interior stripped the rest of the way. -DONE
2. get cage installed, with padding. -DONE
3. get rockers replaced with 2x5 rectangle and tied into the frame. -DONE
4. get cage tied into frame. -DONE
5. get tires on 15x8's instead of 15x10's. -DONE
6. get new tires for trailer. -DONE
7. get cage, new rockers, and jeep floor painted.... not going to happen before WF.
8. get jeep and trailer tags :D. -DONE
9. oil change, check fluids on Jeep. -DONE
10. get tow rig running right (replaced all the spark plugs, what a bitch). -DONE
11. get everything packed into the jeep (tools etc...), and loaded on the trailer.
12. get JCR rear bumper installed.
13. really has nothing to do with WF, but had to replaced the tranny on the Honda Civic too. -DONE

:guitar:

[skoolie72]

Rebuilt front driveshaft that gave up ghost snow-wheeling and ice racing over the last 3 weekends -- Done
Rebuild rear ARB and replace internal thrust washers -- Done
Replace all coils with 4.5" IRO coils -- fawk it...gonna toss in some 1" pucks to keep me at 4.5" until the spring
New cat, muffler, and custom bend pipe to clear rear 4 link -- Done
Find the short in the fawking offroad lights -- Done
Get some new rims and tires, then sell the street set and scrap the trail set -- Maybe this weekend yet
Plugs, wires, cap, rotor, coil, all fluids before I hit 150k -- Done
Replace cargo area tie-downs -- Maybe tomorrow when it gets above freezing
Send my liver a warning/threatening letter -- Done
Return all emails from Gay Dave -- Notta Chance!!!
Find very slow leak in OBA system -- Not until it's a big leak
Molest wife -- Later
:piratefla

[BRIANHO13]

1 fix ram assist and steering gear will be fully hydro (DONE)
2 remove doors yup
3 maybe boatside a bit (DONE not boatsided but those bastards are up there now)
4 add some to the cage will happen (DONE, still gonna add more)
5 install seats kinda has to happen now (DONE)
6 maybe find a front 60, and bigger tires. check and all installed
7 had to make a new exhaust (DONE)
8 need to remove some more body......
9 make new driveshafts (DONE)
10 need new tcase skid made (will be picking up tomorrow)
11 need to make new traction bar (will be doing tomorrow)

The list keeps getting longer and longer and the time til wf is growing shorter and shorter......

[IllianaXJ]

Add "figure out why e-fan stopped working" to my list.

[bshaw]

1. get the jeep interior stripped the rest of the way. -DONE
2. get cage installed, with padding. -DONE
3. get rockers replaced with 2x5 rectangle and tied into the frame. -DONE
4. get cage tied into frame. -DONE
5. get tires on 15x8's instead of 15x10's. -DONE
6. get new tires for trailer. -DONE
7. get cage,rear bumper, new rockers, and jeep floor painted.... not going to happen before WF.
8. get jeep and trailer tags :D. -DONE
9. oil change, check fluids on Jeep. -DONE
10. get tow rig running right (replaced all the spark plugs, what a bitch). -DONE
11. get everything packed into the jeep (tools etc...), and loaded on the trailer. -DONE
12. get JCR rear bumper installed. -DONE
13. really has nothing to do with WF, but had to replaced the tranny on the Honda Civic too. -DONE

:guitar:

we'll be out there tomorrow early afternoon.

[GRIMUS99XJ]

Pick up 07 Jeep JK from paint shop and load in trailer, load 98 XJ in trailer, get tables and tablecloths in trailer.

Get the 97 TJ on bumperpull trailer and mount flag mount to it.
Mount new 40" tires on F250 trailer rig and put spare in the back

fuel up pack bags and leave

but dont worry all the raffle goodies are already in the trailer lol

[IllianaXJ]

Add "figure out why e-fan stopped working" to my list.

Relay I wired in for the override switch took a dump. Good thing I grabbed several at the salvage yard last time I was there :freebie:

[87manche]

well, gas tank is in, it's been all maintenanced, runs really well.

We'll see you guys there tonight.

[BRIANHO13]

its on the trailer.....

[HaleYes]

Mine will be on the trailer as soon as the trailer shows up.:D
Other than that, I'm ready.

[XJ&CHZ4ME]

We got the welder mounted over on the trailer this afternoon and now we just need to get the XJ stuffed full of all our junk and then get it on the trailer. Damn, loading the car full of crap and leaving at the ass crack of dawn...this reminds me of traveling to see the family at Christmas time :D

[IntrepidXJ]

have fun guys. i want to see pics when you get back :)

[xj4life]

mine is on the trailer but i need to remove the 12" of snow on it :mad:

i'm gonna hook up the trailer tonight to make sure the lights and brakes still work. other than that i'm good to go.

[HaleYes]

Jeep is loaded all that left to do is leave.

3:30AM.

[xj4life]

what time is the drivers meeting on saturday morning?

[macgyvr]

Got the little one on the trailer about two hours ago...

got the truck packed...

just got to wait til 7am when i can drop the dog off at the sitters...

then i'll be enrt...

and we are supposed to get snow over night so it could be an interesting drive down...

mac 'guess i'll start drinking' gyvr

[Widgetjeep]

Go fishing
fix jeep
lovin'
get some sleep

not in that order, and #2's a broad heading, which is filled with
fix carrier/pinion bearings
replace worn bushings
--->NP231 to NP242 swap
4.5" lift
SYE and custom driveshaft
32's
rear swing tire carrier

[Prepmech]

Go fishing
fix jeep
lovin'
get some sleep

not in that order, and #2's a broad heading, which is filled with
fix carrier/pinion bearings
replace worn bushings
--->NP231 to NP242 swap
4.5" lift
SYE and custom driveshaft
32's
rear swing tire carrier

Sounds like you've got quite a bit to do tonight if you are going to make it to Attica this weekend.

[XJ&CHZ4ME]

just got back from a trial run with the trailer loaded behind the Tahoe....not gonna happen the way we have it set up with the welder and leads that close to the tongue. Now it is time to call up my buddy at the welding shop and use his truck....wish us luck on making it there in that rig!! I will be there tomorrow sometime come hell or high water, even if I have to drive my rig! It would be a long drive w/ no swaybars and biased TSL's.

[Ramsey]

:wave:

Have fun guys.

[XJ&CHZ4ME]

headed out the door....................................see you suckers in about 10 hours.:pirate1:

[xj4life]

well everythings packed and ready to roll. gonna try to hit the road by 5:30am CST. that should put me at the Badlands by 8:30-9:00 EST.