Want to build my own D30 lockout hub conversion.

i looked at a set of Warn hubs for the ranger pickup today. I'm pretty sure they are the same ones used on the D30 conversion from warn. I want to use the hubs (probably turn the braking surface off a set of rotors to make hubs) from a ranger pickup. I need to talk to someone who's got a Warn conversion set not installed or is servicing their wheel bearings to get some measurements to know what i'm dealing with. mainly, i need to know diameter (ID and OD) and width of the hub (where the rotor mounts on). i need to know length of the spindle from knuckle out, ID and OD of the spindle, width of the flange that bolts to the knuckle, and width and diameter of each step in the spindle. also, spline count and length of the new stubs. thanks guys.