Graluc
NAXJA Forum User
- Location
- Cleveland, TN
I've got a '97 2wd AX-15 that is a good tranny. I have a 4wd tranny that is grinding to a slow death. How hard is it to convert the tailshaft on the 2wd tranny to a 4wd tailshaft?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Swapping the tailhousing on a 2wd AX-15 to a 4wd
- Thread starter Graluc
- Start date
5-90
NAXJA Forum User
- Location
- Hammerspace
The tailshaft housing is easy - converting the transmission to a 4WD configuration is not. You'll also need to swap mainshafts, so you're likely in for an overhaul anyhow...
5-90
5-90
jeep-man-man
NAXJA Forum User
- Location
- Dallas, TX
Its not that hard if you got the tools, instructions, and time....Mainshaft is pretty straight forward swap...Might as well get a rebuild kit, and replace all bearings, seals, and syncros while you're in there....
