88XjLaredo
NAXJA Forum User
- Location
- Chattanooga, Tn
My 3" OME is being installed right now with the 2" HD coils and RE .75 spacer. It did not come with directions and I need to know whether or not I need to reuse the stock spring isolators. Thanks.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Need lift help immediately!
- Thread starter 88XjLaredo
- Start date
Bouncy
NAXJA Forum User
- Location
- Flat Rock, MI
yes
JNickel101
NAXJA Forum User
- Location
- Alamogordo, NM
Yes, you can re-used them if you want, provided they are still in good shape....
2xtreme
NAXJA Forum User
- Location
- Kayak Pt, WA
You do not NEED to re-use them. However, I would re-use them if it was my lift I was installing.
remove them, put in the spacer, put in the isolator, install the spring.
Michael
remove them, put in the spacer, put in the isolator, install the spring.
Michael
TRAILREADYXJ
NAXJA Forum User
- Location
- Raleigh NC
Yes, re-use them. If you don't you'll only get the 2" from the springs since the stock isolators are about 3/4" thick.
