Who Broke What This Weekend ???

[MY92XJ]

Ok Guys So I don't feel so bad heres a thread for everyone to list and show pictures of broken pieces from the weekend. As soon as I get mine all together (sometime today) I will post mine.:eek:

[Metal Thrasher]

I punched a hole in the side wall of my front passenger side tire..... on my daily driver Corolla. The XJ got to drive in to work today :spin1: .

[Ackattack]

I broke off a door handle at Evan's. Apparently XJs are about a door handle's width narrower than a ZJ, cause Adam got through these two trees fine....I didn't. I backed up and tried to get over 3 times before coming to the realization I wasn't making it through unscathed.....so I sacrificed the door handle. Those are some awesome trails!

[adamusmc2002]

Hehehee :)

[Avanteone]

No damage to the XJ... broke the seal on two bottles of rum IIRC. :)

J

[ECKSJAY]

Pulled a mirror off the passenger side while squeeeeezing between two very friendly trees. :D

[WheelinJR]

I broke wind.

I also broke a computer monitor whilst putting about 50 rounds of 9mm ammo thru it.

[Mstrkage]

crushed a rocker, I guess its never too late to get sliders

[supsa]

U-joint but still ran 311 and 197. Made it home and the wife was happy:looney:

[KarlVP]

I blew a tranny cooler line on the ZJ.

Fifo unleashed the fury on his D30. But I'll leave it to him to tell that story.

Pics will be posted upon inspection.

[PolishX]

I popped my pass side fender flare off ,, BUT i have my TJ flares and my cutt off wheel ready to go . Any tips ? Oh one guy out in a 97 lost his electric fan , pass side shaft and he backed into me and dented his doors up

[adamusmc2002]

U-joint but still ran 311 and 197. Made it home and the wife was happy:looney:

what were in wheelin in? My buddy, Ackattack and I were on 311 Saturday night and sunday morning, I've got a red 96 cherokee, and he has a dark green ZJ. Sunday we started with 311, then went over to 198 and 197. Had a blast.

[Ba-Riedo]

broke my alternator when i got about 6 inches of water inside my xj. its all sitting in pieces drying out now. i swear the pond didnt look that deep...

[IXNAYXJ]

I bent my front license plate climbing a 40" TSL SX.

-----Matt-----

[CanMan]

Broke the bar pin off the bottom of the pass side shock. More body damage, drivers side doors harder to close. Might of got a pass side upper BJ. Otherwise, it held up well.

[PornstaR]

- crushed drivers rocker (only 12inches of it)
- cracked rear diff yoke
- blown transfercase (242)
- dumped the caps for the rear U-joint in the dirt



-more pics upon further inspection.......

[ECKSJAY]

I bent my front license plate climbing a 40" TSL SX.

-----Matt-----

If we're counting bent license plates then I bent my rear one 90 degrees coming down the backside of a rather large rock. :D

[Boxil]

i broke my bank account buying a new house and umm my seat belt driving around town in my xj :(

broke emergency brake a week ago. just little crap thats happening thats pissing me off.

[MY92XJ]

Hmmm forgot my darn camera but here is my list so far

2 rear driveline u-joints
1 rear yolk
1 231 transfercase

all = :scared: of a ride down a steep hill comming to rest sideway's

Pictures of pieces to come after I gather them all up

[hards91xj]

Pulled a mirror off the passenger side while squeeeeezing between two very friendly trees. :DYou broke bark off a tree 1`st thing,NOBODY else did that:laugh3:

[MY92XJ]

You broke bark off a tree 1`st thing,NOBODY else did that:laugh3:

Oh and don't forget that the TJ behind him had to pick the piece outta the tree....:roflmao:

[2xtreme]

I bent my front license plate climbing a 40" TSL SX.

-----Matt-----

You sure about that? I don't believe that they make a 40" SX:nono:

Michael

[rocknxj]

I may have broke some sort of record. I started my RE 3.5" Super Ride lift Friday afternoon and finished 23 hours later. My hands ache, my back is sore, and my knees are shot. I'm physically broke, but it's a good feeling.

Today I started on my RE transfer case drop kit. I gave up trying to remove the studs after an hour. Will try again tomorrow.

I'm slow, but determined!



------
Project Old Blue
'99 Cherokee Sport
RE 3.5" Lift
31" BFG AT/KOs
Lot's of other stuff

[mud1059]

I didn't break anything...my son on the otherhand:













2 stitches and some nasty road rash on his second birthday (Friday). I still have yet to figure out what caused all the damage. All he was doing was rolling on the top of a basketball sized rubber ball - on asphalt. He screamed, I turned around and he was still on top of the ball. I don't get it.
http://i102.photobucket.com/albums/m111/mud1059/IMG_0690.jpg

[WaXJ_Skier]

One of my Methhead neighbors ran into my Ex's parked car last night. Nothing of mine was damaged but I had to deal with it. :twak:

[Cndlpwr]

I simply broke my new suspension in! Held up though..

[hards91xj]

How about 1 bent transfer case skidplate from resting on a pile of rocks
Fridge in the motorhome quit working on propane,but Camping World and $160.00 to the resque.
The pleasure of driving the motorhome home in the dark with no head lights sunday..should I fix or just not drive after dark:scared:

[hards91xj]

I simply broke my new suspension in! Held up though..Did you finish the graphics on the side of your rig ?

[adamusmc2002]

I may have broke some sort of record. I started my RE 3.5" Super Ride lift Friday afternoon and finished 23 hours later. My hands ache, my back is sore, and my knees are shot. I'm physically broke, but it's a good feeling.

Today I started on my RE transfer case drop kit. I gave up trying to remove the studs after an hour. Will try again tomorrow.

I'm slow, but determined!



------
Project Old Blue
'99 Cherokee Sport
RE 3.5" Lift
31" BFG AT/KOs
Lot's of other stuff

I feel your pain, i spent 9 hours Friday swapping leaf springs. Most exhausted/sore I've been in my life! I hate u bolts!!

[WaXJ_Skier]

I hate u bolts!!
That was the easy part when I did mine?

[noutlawjeeper]

i lost the glass to my passenger side mirror. we even looked for it where we had just been and it was gone. i think sasquatch stole it for himself.

[CoolCal]

How about 1 bent transfer case skidplate from resting on a pile of rocks
Fridge in the motorhome quit working on propane,but Camping World and $160.00 to the resque.
The pleasure of driving the motorhome home in the dark with no head lights sunday..should I fix or just not drive after dark:scared:

Was that 160 bucks for the module!!!!!!!???????????? OUCH!

I broke-in my :kissyou: girlfriend. :loveu: Her first trail ride on the "kids course". Next time she drives!!!!:shiver: :yelclap:

http://i33.photobucket.com/albums/d75/CalCurow/Liberty%20memorial%20Day/100_0289.jpg

[CoolCal]

Hmmm forgot my darn camera but here is my list so far

2 rear driveline u-joints
1 rear yolk
1 231 transfercase

all = :scared: of a ride down a steep hill comming to rest sideway's

Pictures of pieces to come after I gather them all up

If you forgot your camera, what's that your are aiming at me? shud i duck next time? :confused1

http://i33.photobucket.com/albums/d75/CalCurow/Liberty%20memorial%20Day/100_0312.jpg

[FiFo]

I scratched up my new paint job.

Oh, and my front axle is making funny noises, I probably broke the ring and pinion, just hoping the Detroit is ok.

Anyone got a cheap HP D60 lying around they don't want? :)

[2xtreme]

Anyone got a cheap HP D60 lying around they don't want? :)

Now that you have a nice narrow body, you considering going full width :D
Michael

[MY92XJ]

If you forgot your camera, what's that your are aiming at me? shud i duck next time? :confused1


YES !!!!!! :roll:

[Evil88]

Made my Jeep Bleed Red. UCA into tranny line into oil pan.

[FiFo]

Now that you have a nice narrow body, you considering going full width :D
Michael

I would narrow it if I did it, but I am thinking about a new front axle as my next upgrade. I have gone through atleast one ring and pinion and a set of axle shafts in the last year, and that's with only 33x10.5 tires. I would like to get a set of 35-36" tires next year, which means time for a stronger front axle, and since I think a D44 is a waist of time, that means D60 or a D60/Ford 9, hybred.

[2xtreme]

I would narrow it if I did it, but I am thinking about a new front axle as my next upgrade. I have gone through atleast one ring and pinion and a set of axle shafts in the last year, and that's with only 33x10.5 tires. I would like to get a set of 35-36" tires next year, which means time for a stronger front axle, and since I think a D44 is a waist of time, that means D60 or a D60/Ford 9, hybred.

Sweet!! I think you are on the right track. I like how narrow your truck turned out!!

Michael

[MY92XJ]

Ok here's the breakage so far

Rear Yolk

http://georgethejeep.com/rear_yolk.jpg

Yolk Ear

http://www.georgethejeep.com/yolkear.jpg

Ears are spread on driveline

http://www.georgethejeep.com/rear_driveline.jpg

Little crack in case look about in the middle by the upside down 7

http://www.georgethejeep.com/Pictures_005.jpg

Big Crack in case no need to explain where that one is :eek:

http://www.georgethejeep.com/Pictures_001.jpg

Tail Shaft Yolk and u-joint which are going to take a BFH to get either to move

http://www.georgethejeep.com/Pictures_022.jpg

Howard Presenting us the TP :moon: award for the :scared: situation we were in after all this broke while going up a very steep hill...sliding backwards comming to rest in a VERY OFF CAMBER position. I'll tell you all the whole story some other time.

http://www.georgethejeep.com/IMG_0284.jpg

:worship: Thankyou Howard, Phil, Cal for getting us back to camp safely :worship:

:cheers:

[sams88]

Wow, definitely had a little damage there! You can always trust Howard to be handy with the paperwork though. Heh heh

[hards91xj]

BEST part of the whole weekend,:roll: :roll: :roll:

[PornstaR]

Quote:
Originally Posted by IXNAYXJ
I bent my front license plate climbing a 40" TSL SX.

-----Matt-----




You sure about that? I don't believe that they make a 40" SX:nono:

Michael


Oh come on now he was too drunk to know what size or brand it was.... he was just running around saying "Its wild crazy drunkeness" :doh:

[ECKSJAY]

Oh come on now he was too drunk to know what size or brand it was.... he was just running around saying "Its wild crazy drunkeness" :doh:

Shocking.

[WaXJ_Skier]

he was just running around saying "Its wild crazy drunkeness" :doh:

I missed that? I feel like my weekend was somehow empty now :bawl:

[KarlVP]

I missed that? I feel like my weekend was somehow empty now :bawl:


Me too.

[mike5097]

lets see....

I tried to Climb over the back of a burned up, shot up, dead honda civic. It didnt like the idea of me doin that and pressed the end of my bumper into my front left fender. so i got a nice sized dent in there.

but that was it. lets just call it a good luck first test.

[PornstaR]

Ok so I got the 242 pulled and the new 231 in the shop. Decided that Ill just slap in the 231 tomorrow so I yanked appart the 242.

- snapped the tail shaft right in front of the speedo gear (clean break)
- chewed up the speedo gear
- handful and a half of metal chunks
- pick up filter fell off
- pick up tube fell off (both undamaged)

actually the 242 dosent look too bad other than needing a new tail shaft, so I may be repairing it (if the parts are cheap) and selling it. For the most part all the broken chunks stayed in the tail shaft so my thinkng the chain was delaminated was wrong. The main gear for the chain only had one end in a bearing so when it was loaded thats why the chain would jump. Forgot the camera tho but will get pics tomorrow when i go back to my shop.

[PornstaR]

Ok here are some pics.............

http://www.imagestation.com/picture/sraid225/p32776c1d7f13d8724c605a143bdd7168/e93a224e.jpg

http://www.imagestation.com/picture/sraid225/p7c8f9e90f63958b86c8d57e65d7afe8d/e93a2243.jpg

http://www.imagestation.com/picture/sraid225/pe8811181e8dcaa4d95a4a5b5c9b2ef38/e93a2241.jpg

http://www.imagestation.com/picture/sraid225/pf79d9924be97dd03787dafe6a576109a/e93a2237.jpg

http://www.imagestation.com/picture/sraid225/p2bc66c29c6d5b52ff5263d03c741cfc1/e93a2226.jpg

http://www.imagestation.com/picture/sraid225/pdfd8d378a8d3d3473c5dcf0253f8fa0a/e93a21ac.jpg

[WaXJ_Skier]

I did something to my clutch on the way to work last night. As of now I have a permanently engaged clutch and with a lot of force use of 1st and second gear. And I get to use my started to get me moving. My jeep loves me right now :dunce:

[hards91xj]

[quote=hards91xj]How about 1 bent transfer case skidplate from resting on a pile of rocks::::I took off the skid plate to straighten it and :eyes: whoa look at the floor :thumbdn: Bent up and the cross member too.Didn`t touch the transfer case :thumbup: Looks like porta pwr to the floor. Now I know why my console is crooked . Hey CANDLPWR where are all those pics you took ??

[MY92XJ]

nice job Will :yelclap:

I havent dismanteled mine yet to see if there is internal damage.

Howard you sure you didn't smack it on the same rock that broke our TC ?

BTW there is 2 wowwies in the tail shaft housing that show it was smacked.

I see a TC skid plate in Rocky's future

[IXNAYXJ]

...he was just running around saying "Its wild crazy drunkeness."...in reference to the "Drunky Rocks," where the folks were indeed wild, crazy and very drunk. After I crawled down from the tire, the buggy the tire belonged to (whatever size it was) nailed the gas and rammed straight into a PNWJeeper's XJ right behind me. Luckily there was no damage to either rig, but it was pretty illuminating.

I would, of course, never condone drunk driving. Let's let this one rest, shall we?

-----Matt-----

[ECKSJAY]

I would, of course, never condone drunk driving. Let's let this one rest, shall we?

That's some funny shit right there.

[IXNAYXJ]

That's some funny shit right there.You said shit. I'm telling.

-----Matt-----

[ECKSJAY]

You said shit. I'm telling.

-----Matt-----

http://www.geekjive.com/blog/images/lipnicky1.jpg

[IXNAYXJ]

http://www.geekjive.com/blog/images/lipnicky1.jpg:roflmao:

-----Matt-----

[lornius]

Dag Nab it! I had a slowly degrading hub roast on me Friday on my way home from work. I spent Saturday running around for parts and that missing caliper socket (&*$%$#$!* E-16). Sunday was bbq with the in-laws.

Sadly no wheelie for me this weekend. (But at least I got to work on my Jeep!)