• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Tomken NP242 T-case skid plate

w_howey

NAXJA Forum User
Location
The Mudwest
This skid ONLY works on 242 equipped jeeps.

USED

$80

You pay shipping...
139053176.jpg
 
Newbie question......Will it work with a TC drop?
 
With some modification, Yes.

The front edge attaches to the crossmember, so that wouldn't be an issue.
But the side bolts to the Uni-body rail. You would need to make some kind of spacer to fill that gap.

If you used the 1" square tube style of T-case drop, you could just make it long enough to fill the space from the plate in.
 
Thanks, let me guestimate shipping and give it some thought. One thing for sure is that you'd just have to cable tie or bolt the brackets to it and ship sans carton. No need to worry about it getting dented or scratched :)
 
I checked shipping for another buying who went MIA on me. It was roughly 20 bucks to New England. I would be shipping to KY would be around the same thing will all the fuel surcharges these days.
 
PM sent but, don't let me stop others from buying. It is just another newbie question.
 
Back
Top