PDA

View Full Version : RE Superflex tool

Clint
July 18th, 2006, 19:13
Real quick, does anyone have the tool you need to get a RE Superflex joint apart? If so can I borrow? thnks...
XJBANKER
July 18th, 2006, 19:25
Matt and I were talking about buying one the other day. Now we will know where to borrow one instead.
XJEEPER
July 18th, 2006, 20:58
I think Rocklogic has these on the shelf, but I have a small RE SF joint tool that I would "barro ya".........I could take it to work tomorrow and meet you?

Let me know.
Clint
July 18th, 2006, 21:50
I think Rocklogic has these on the shelf, but I have a small RE SF joint tool that I would "barro ya".........I could take it to work tomorrow and meet you?

Let me know.


Jeff, the small one is precisely what I need :) I'm not quite ready for it yet, I was just making sure there was one around here so when I ordered parts, I knew if one of those was on the list as well. Thanks!
ECKSJAY
July 18th, 2006, 21:54
A punch wouldn't work for you or do you have one that's REALLY stuck?
Clint
July 18th, 2006, 22:10
Have not even torn into it yet. Just planning this out beforehand to avoid surprises.
ECKSJAY
July 18th, 2006, 22:22
Have not even torn into it yet. Just planning this out beforehand to avoid surprises.

I didn't want to get the tool. I called my contact at RE and he said, 'Oh just use a punch and hammer to drive the thing around. It should come right out.' It did...and didn't even leave a mark. :)
XJEEPER
July 19th, 2006, 06:12
This is prolly a better option.

http://i27.photobucket.com/albums/c192/kid4lyf/REmount.jpg
XJEEPER
July 19th, 2006, 21:07
This is prolly a better option.

http://i27.photobucket.com/albums/c192/kid4lyf/REmount.jpg

Compliments of Kid4lyf:
"Official name: Adjustable Face Pin Spanner Wrench.
Got mine from SnapOn but I'm sure they're available from other manufacturers.
They come in three sizes (pin hole diameter)
You need 1/4" pin size (SnapOn part# AFS483B) for the large RE joints."