300 T-CASE IN XJ

XJANDREWNH · Apr 10, 2007

I WANT TO MOUNT A 300 IN MY XJ IM BUILDING and i know i have to flip it not a big deal but is there anything else i need to do

i searched but could not find any info any help appreciated

The Hebrew Hammer · Apr 10, 2007

you will need to get conversion adapters check out novak conversions they should have what you need http://www.novak-adapt.com/

barillms · Apr 10, 2007

Aren't they passenger side drop?

mike86xj · Apr 10, 2007

barillms said:
Aren't they passenger side drop?

when you flip it it puts the drop to the drivers side

jrsxj98 · Apr 10, 2007

http://www.stak4x4.com/d300.htm

barillms · Apr 10, 2007

Then isn't the linkage locations all out of whack?

Shadowgames96XJ · Apr 11, 2007

go to cable shifters than

cumorglas · Apr 11, 2007

barillms said:
Then isn't the linkage locations all out of whack?

the flip kit usually deals with that. but you can also cable shift them. a twin stick cable shifter is easy to make and not too terribly expensive to buy.

but if you are seriously thinking about the 300 swap you should look into the box4rocks setup. for not that much more than you will spend to do the 300 right you can have something way more versatile.

family TJ · Apr 11, 2007

Don't you have to cut and raise the center hump?

cumorglas · Apr 11, 2007

family TJ said:
Don't you have to cut and raise the center hump?

that is the least of your worries in this swap. but yes you will have to deal with this.

300 T-CASE IN XJ

XJANDREWNH

NAXJA Forum User

The Hebrew Hammer

NAXJA Forum User

barillms

NAXJA Forum User

mike86xj

NAXJA Forum User

jrsxj98

DILIGAF

barillms

NAXJA Forum User

Shadowgames96XJ

NAXJA Forum User

cumorglas

NAXJA Forum User

family TJ

NAXJA Forum User

cumorglas

NAXJA Forum User

Similar threads