Dog_Soldier13
NAXJA Forum User
- Location
- florida
I have a 95 xj with a 3" pro-comp lift but my rear leaf springs are starting to sag. what do i need to do to fix it? what size springs do i need?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Leaf springs
- Thread starter Dog_Soldier13
- Start date
CanMan
NAXJA Forum User
- Location
- Lake Tapps, WA
I would suggest a full pack if you were to start fresh. If not, Id get a used XJ pack, and do another AAL. Price might end up the same though.
Dog_Soldier13
NAXJA Forum User
- Location
- florida
what size full pack just a 3" or what? and where can i get one cuz i looked everywhere
Ray H
NAXJA Forum User
- Location
- Falling Waters, WV
Tons of companies offer spring packs in the 3-3.5" range. If you want to stick with ProComp stuff, you can get new sets of ProComp springs on Ebay for pretty good prices.
david steinhoff
NAXJA Forum User
- Location
- Gladstone MI
springs
xjs are bad for this,easy fix is a shackle,it will get you about 1.5"($65.00).cheaper is to add lift blocks,just get some 2.5"wx6"long plate steel,you can go up 1/2" at a time.Its about $5 a 1/2".
xjs are bad for this,easy fix is a shackle,it will get you about 1.5"($65.00).cheaper is to add lift blocks,just get some 2.5"wx6"long plate steel,you can go up 1/2" at a time.Its about $5 a 1/2".
Mutant_Xj
NAXJA Forum User
- Location
- Susquehanna Valley
Those are the worst things to do. Best replace the springs with a new full pack, second best build a bastard pack.
Dog_Soldier13
NAXJA Forum User
- Location
- florida
i took a look the other night and it has pro comp shackles onit as well as an add-a-leaf, i dont want to get another aal and i dont want to build a bastard pack. so what size full springs do i need, just 3"?
