• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Eliminate Single Shear, good for Shocks AND Coilovers!

Status
Not open for further replies.

Dan Fredrickson

NAXJA Forum User
Location
Sacramento, CA
How many rigs come from the factory with a single post for the lower shock bracket? Thats right, Lots of em, and its a real weak point. With the inspriation from our 3 Legged Link Brackets we developed these Shock Brackets. They are a 3 piece design with the main section bent and the secong tab is a slider that you can position for YOUR application before you weld them up. The third piece is a "floor" to add rigidity and strength, they are 1/4" thick and mount directly to the side of the axle.They will fit from the 1 1/4" to the 1 3/4" pin eye mounting points, that pretty much covers all the coilovers and standard shocks made! They eliminate single shear and position the Pin Eye correctly for maximum articulation. They are sold in pairs at $24 a pair!

Axle%20Side%20Shock%20Bracket.jpg


Again, I am sorry that the pics aren't better, I am much better with steel than a camera!

Dan Fredrickson
www.ruffstuffspecialties.com
Your Fabrication Parts Source
916.600.1945
 
We've been getting alot of calls on these.....Yes, they will place the shock correctly for maximum articulation. Yes they will accept an airshock or coilover with a 1.25" width eye (1.75" too). And yes we have them in stock!
 
Status
Not open for further replies.
Back
Top