• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

high steer pitman arm options

bj-666

NAXJA Forum User
Location
Rhode Island
well i'm installing high steer inverted T and have come into a problem with clearance between pitman arm and tierod. as i see it my options are shorter high steer arms brings components back into springs. move the axle back requires cutting 4 arms and rewelding. bending the tierod to clear. or my favorite option finding a slightly shorter pitman arm (currently stock) I only need about 3/4 of an inch to clear nicely. i was thinking of bending the stock are but i am affraid that will ruin the heat treating. i have read that the wrangler arm is shorter but don't have any proof. any creative ideas?
thanks
Brandon
 
Back
Top