NW Vendors List

[ECKSJAY]

Going to give this a shot to keep it fair for everyone involved.

If you're a local vendor: please put ONE post up following this one, in THIS thread, describing yourself and what you do (services, products). Make sure to give contact information so folks know how to reach you. To keep from entering a pissing match, let's not put any pricing or hints of 'sales' in your post. Side conversations won't be allowed and the thread may be closed periodically. If it IS closed, PM me and we can set something up to have your post edited. By posting below you agree to follow these relatively simple guidelines.

We're reserving this for active business owners/employees only!

We'll see how this goes! Oh, you don't have to be a National Sponsor to enjoy the benes of this. ;)

[WheelinJR]

Well now this will explain the Jason-RJR thing.

I am in charge of www.rjroffroad.com (http://www.rjroffroad.com) and we operate out of Tualatin, Oregon. We retail basically everything, alot of what I can get isn't listed yet.

Alot of stuff I do good deals on, and alot of stuff not so much. Just PM me for whatever you need. We do pretty good on Rubicon Express and have a free shipping promo going too on orders over $100.

Side note if any pdx locals want stuff that we stock (ie RJR Products and Warrior Products) PM me I can do good discounts on that stuff. And also PM me about powdercoating if you need something done.

[Avanteone]

We are Auburn Car Repair & Offroad. We are an independent, family owned business and have been at the same location for just over 10 years. We have been working VERY hard to establish a good reputation for quality service, repairs and upgrades on Jeep products as well as most other vehicles. Many of you have been customers for a while already, and I hope to be of service to many more of you in the future. We are a full service automotive repair and maintenance facility, not JUST offroad. We can maintain your daily driver or other vehicles as well, including Diesel performance upgrades!

We can offer competitive pricing and guaranteed installation of aftermarket components from just about any offroad parts supplier, some of which include:

Rubicon Express
Clayton Offroad Manufacturing
Teraflex Manufacturing
Currie Enterprises
Tom Woods Drivelines
Yukon Gear and Axle, Superior Axle, Dutchman Axle, Alloy USA
Detroit Locker, ARB air locker, Ox Locker, Lockright, Aussie Locker, etc.
Poison Spyder Customs
Advance Adapters
Skyjacker, Fabtech, BDS, Rancho, etc.
Mountain Offroad Enterprises
Spidertrax Offroad
THOR Armor
Warn winches
Staun beadlocks
BFGoodrich Tires
Goodyear Tires
Interco Tires
Rock Crawler & Pro Comp Wheels
BullyDog, Edge Manufacturing
Flowmaster, Magnaflow, Gibson, etc.

This is just a small sampling of what we can offer, let us know your needs!

Feel free to email, call, or PM me if there's anything I can do for you!

John Mathews
Auburn Car Repair & Offroad
253-939-5019

[MY92XJ]

Hi everyone,

We are George The Jeep. We are located in the Kent/Covington area. My dad George has been buying and selling jeeps and jeep parts for around 48 years. Well let me put it this way....we have 1 1/4 acres that is all jeeps !!

We sell both new and used parts for Cj's, Tj's, Yj's, Mj's, Xj's , Sj's, Zj's jeepster's, jeepster commando's, scout's, Willy's pickup's and wagon's and many others

feel free to visit our website at :compwork: www.georgethejeep.com (http://www.georgethejeep.com)

for more detailed information

Contact:

George or Diana
(253) 631-4390

This is our hobby that has gotten totally outta control

[Ba-Riedo]

I am now working for Master-Pull. For those who don't know Master-Pull was founded in 1996 by Emil Bjornsson, who was a commercial fisherman from Iceland. Emil is responsible for bringing synthetic line to the offroad community, as well as the military. Master-Pull offers the highest quality and most advanced synthetic lines for many different applications, ranging from ATV's to Military trucks and everything in between.

We also offer the Super Yanker, which is a whole new kind of tow strap that stretches up to 30% while you use it to reduce the stress on the drive train and chassis of your vehicle.

Since all the lines are made up in house we can do custom lines of nearly any size, as well as many different line options. We also repair lines, and can splice together sections that have broken.

Visit our website www.masterpull.com (http://www.naxja.org/forum/www.masterpull.com) for more information or call 360 714 1313.

-Alex

[Just Differentials]

Hi, my name is Carl, and I am with JTS Parts & Accessories. (NAXJA Titanium Sponsor) We are a worldwide differential and axle parts distributor located in Cashmere, WA. We have over $1million inventory in stock of Ring & Pinions, Lockers, Posi units, Install kits, Axles, u-joints, SYE kits, Wheel Spacers, and more. We also offer installation and wholesale programs for you vendors out there. We even have some great new products like NITRO Gear & Axle 4.88 gears for the 8.25" axle & 4340 chromoly axle shafts! I have owned several XJ's, as well as most of my family, friends & customers. We offer some of the most knowledgable and freindly service in the industry, and will offer a hand if we see you on the trail! PM, email or call anytime.*
http://naxja.org/adverts/adimage.php?filename=naxja_468x60.jpg&contenttype=jpeg

[R.DesJardin]

Hello,
I am donating a Rail Shifter and mounting hardware to be given away at NWFest'09.
I'm in Clarkston, WA and I am making Shift Controllers for AW4 transmissions. These can be used with or without the TCM.
Check them out at www.radesignsproducts.com (http://www.radesignsproducts.com)

Thanks guys,
Rory D.
RADesigns Products LLC

[ECKSJAY]

Kent 4 Wheel Drive's owner, Bill Van Tuyl, has experience in the truck and off-road market that spans nearly 4 decades. He has assembled a staff of the very best professionals in the Northwest who are eager to meet your needs. From the fully stocked parts department to the 7 bay service center, there is almost nothing we can't handle. Our location in downtown Kent, WA has been selling off-road equipment and offering full service vehicle repair for over 35 years. We have the experience and know how to make sure your rig is set up the right way, the first time, every time.

Come in and see for yourself why Bill's shops have been named by the readers of 4 Wheeler Magazine as some of the best in the country.

A sampling of what we offer at Kent 4 Wheel Drive:

Direct dealers of Rubicon Express, ARB/IPF/Old Man Emu, American Expedition Vehicles/Nth Degree Suspension, Advance Adapters, Teraflex, Trailmaster/OR-Fab, Yukon Gear, Superior Gear and Axle, KC HiLites, Lightforce Lights, Velocity Offroad, Poison Spyder Customs, Garvin Wilderness Racks, Warrior Products, Icon Vehicle Dynamics, RCD Suspensions, LC Engineering...to name a few. We also carry lines such as PIAA, Warn, Bilstein, Skyjacker, Superlift, Gibson Performance, Corsa Exhaust, MSD, Holley, Edge, Bullydog, Superchips, and many other performance lines. Just ask! We also proudly sell, stock, and use Royal Purple synthetic lubricants.

In addition to these outstanding products, we are Warn Red Letter dealers and an authorized Warn repair facility. Bring us your winches for repair and/or warranty service work. We handle your vehicle service work needs as well. Replace clutches, rebuild differentials, change oil, replace ball joints, inspect and repair suspension components, rebuild gas shocks, etc.

We also introduced the American Expedition Vehicles Jeep JK Hemi conversions to our shop last year; offering 5.7L, 5.7L VVT, and 6.1L Hemi conversions for your 2007+ Wrangler! These are not hot-rodded engines; they're reliable factory configuration for seamless installation. The AEV packages are complete from nose to tail and are a GREAT upgrade for the anemic V6 that comes standard in the JK Wrangler. For the TJ Wranglers, AEV offers a Highline fender kit that allows fitment of larger tires and lower center of gravity without the 'issues' of major suspension upgrades. Contact us or American Expedition Vehicles if you have any questions.

Located at 730 Central Ave N, Kent, WA 98032 (The old TC'S Offroad building)

You can reach us at 253-852-2720 or 800-829-9599.
Open Mon-Fri 8:30am-6pm, Sat 10am-3pm
Bill, Phil, and Viktor will be ready to help.

[ECKSJAY]

Rivendell Sales

One size does not fit all and size does matter. The best self-defense gun is the one that fits you and you are comfortable with. The choice of a handgun is very personal and should not be decided for you by well-meaning family members or friends. Our staff understands this and can help you find what works best for your needs. We feel how a handgun fits in your hand, or a shotgun/carbine fits to your shoulder is much more important than what brand or caliber of firearm you are choosing. This is especially true of shooters who have small hands or are small in stature since most guns are made to fit large males. While many shops just try to sell you anything, we sell tools that will work for you.

How you handle the firearm is important also, which is why each purchase includes a 30 minute basic firearm handling lesson. We'll even teach you how to properly field strip and maintain your new purchase.

We stock a variety of sized revolvers, pistols, rifles, and shotguns for everyone from small shooters to large.

Some brands and models we carry/recommend:

Smith & Wesson M&P9
Smith & Wesson Model 60 revolver w/3" barrel
Sig Sauer P250
STI 1911
Springfield EMP
Glock Gen 4
Remington 1100 20ga (a house specialty is our custom 1100 with 12" Length of Pull and 21" barrel with rifle sights)

We also carry a variety of accessories and cleaning supplies, as well as holsters and quality carry purses for the ladies!

Come see Jennie, Bill, and Phil at 730 Central Ave. N, Kent, WA 98032.
Yep, we're located inside Kent 4 Wheel Drive.
You can reach us at 253-876-0777 Mon-Fri 10-6, and most Saturdays 10-3

[NW99XJ]

Hey all, I've been establishing my self over the last few years in the Jeep Community, and although I'm new here to NAXJA, I've developed a good reputation on Jeepforum.com as a Jeep enthusiast who like to help other Jeepers.
I have worked in the mobile electronics field for over a decade, and hold a first class MECP Certification. I'm not an ASE mechanic, but have worked on vehicles for many many years, and can aptly handle most light mechanical work. Everything but transmission rebuilds and motor swaps (major mechanical.) However any suspension work, full lift kit installs, axle swaps, component replacement, to basic maintenance is no problem for me.
If you need electrical work of any kind, from relay work, fog/driving/rock light installs, audio system design/installation/tuning, I can give a lasting, reliable, and professional installation that you can depend on and be proud of.
If you need help doing a spring swap, ball joint repair, rebuilding a drive line, or have a whole lift kit that needs to go in, I can help you out. Maybe you have some armor that needs to go in, or a new bumper that you need help installing, let me know.
If you're in a tight spot, don't have much cash, but desperately need some help with your rig, PM me, post something here, or reach me thru my email: jbchill1@yahoo.com, and we'll see what we can work out. I've been known to spend a full day working on a Jeeper's rig for nothing more than a handshake. Bartering is always an option, so get a hold of me and let me know what your needs are.