Heater hose routing questions

[Paul229]

The '95 XJ my mother purchased has no heat. A quick look under the hood revealed that the heater control valve was busted up top and a hose was disconnected. The hose coming off the top of the t-stat housing is routed to where the hose for the motor should go. Is there a diagram that tells me where to run these hoses, so that I don't mess things up. The one diagram so far that I've found was for a '93. I know that the '91 and up had the open cooling system, but I'm not sure if there were any changes made between '93 and '95.

Thanks.

[riverfever]

I'm on hold right now and can expect a 30 minute wait but afterwards, I can take pics of that area if it will help.

-river

[Jeep914x4]

I busted my control valve changing my thermostat.

Did a quick search for "heater valve" and came up with this.

http://www.naxja.org/forum/showthread.php?t=899046&highlight=heater+control+valve

There is a pic at the bottom of the thread with the hose routing.

Good luck.

[Paul229]

Thanks all for the help!