8274-50 Wiring help

I've searched and found the following on the 8274 but not the 8274-50. Anyone know if the wire up the same?? On the pirate link he says there different so who knows.


http://www.jedi.com/obiwan/jeep/winch.html


http://www.pirate4x4.com/tech/billavista/8274/


I just bought a used one and all of the wires were removed from the solenoids so I have no idea where ANYTHING goes. Anyone got a diagram or a pic of the solenoids on the -50??

Thanks

Theoretically it shouldn't be any different than the one pictured. You should have three wires for the remote. One hot from the winch to the switches to an on/ off switch. Then from the toggle to one side of each momentary switch. Then one wire each from the other terminal on the momentary switches to the solenoids. With one switch wired to one solenoid, and the other wire to the other solenoid.

EDIT: Note that is a basic description with no protection to the winch should both the in, and out buttons get pushed at the same time.

Wow, thanks I think......

Only prob is I have no idea what any of that means, I can build a radius arm 3 link that works like a charm but your reply might as well be written in chinease. A wiring guru I'm not. I'm hoping to find a pic of the stock setup on the -50 that I can copy. I'm searching the web like crazy but I can't find anything like the links above.

Thanks for trying to help though

http://www.warn.com/truck/winches/src/M8274-50.shtml
click on the parts list that matches what you have, comes up as a PDF, then you can zoom in on the solinoid pack

That helps, thanks man.