Home Grown T-Case Skids

[Harvo]

If any of you have made your own T-Case skid, what was your design like? Pictures would be cool, but description would be helpful too. I'm the most curious about how you mounted it, and the materials you have used.

Thanks

[Steve F]

I used 8mm plate and bolted it with 4 bolts to my modified crossmember and ran two bolts through the rame with a backing plate on the otherside, this picture was taken before I ran the bolts through the frame. It looks low but the crossmember is raised so it's misleading.

Its taken a few big hits with no prblems at all. I also cut the bottom off the stock crossmember and plated it with 8mm plate as well.

http://www.4wdlinks.com.au/albums/album598/crossmember_026.sized.jpg

Cheers
Steve