Frank Z
NAXJA Forum User
- Location
- Colorado Springs
Hesco wants $30 for for the damn thing! Anyone else make 'em?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Crankshaft Damper Spacer
- Thread starter Frank Z
- Start date
MrShoeBoy
NAXJA Forum User
- Location
- Cincinnati, OH
Get a piece of pipe just big enough to fit over the crank and key and cut it to length. Should be 1cm. The machine shop that did my engine work made in about 5 min and didnt cost me anything, but I did drop $800 on a parts and machine work.
AARON
AARON
Frank Z
NAXJA Forum User
- Location
- Colorado Springs
After posting the original thread I thought about it a bit. I think I'll try fabbing one from a donor balancer.
lawsoncl
NAXJA Forum User
- Location
- North Idaho
Silly question, but why do you need a spacer? Is this to move it front-back?
Frank Z
NAXJA Forum User
- Location
- Colorado Springs
I'm using a 12 counter-weight crankshaft for my stroker build. the nose is longer than a 4.0L crankshaft. The two options are to use a spacer between the harmonic balancer and the balancer washer or have the crank cut down.
lawsoncl
NAXJA Forum User
- Location
- North Idaho
Thanks for the explanation. :}
