O2 wiring question...

if anyone out there has a FSM for a 95 XJ, could you please look up what the O2 sensor wires are labled. I need to know which wire is the "high" that goes to the computer, if anyone could tell me this i would greatly appreciate it.

Thanks, STROKER

O2 sensor 3 wire..
lead A: appears to be the power-in lead..
lead B: goes to engine ground..
lead C: to ECU input plug #35....
it may or may not be what you need but thats all i can come up with...
after i looked it up i realized you have a 95.... probably not what you need huh? my book only covers up to 91.. i'll post it anyways just in case not everything changed after the renix system...
mike

thanks but actually i have a 4 wire sensor, i'm pretty sure the 2 white wires are for the heater, than the black & grey wire are the signals but i need to know which one is the high side....

Thanks
STROKER

OBD I?

I got the info if by chance your's is OBD II. Of course big diffs between the two-

I believe its OBDI. turn the key 3 times. I dont have the plug for OBDII