totalvideo2
NAXJA Forum User
- Location
- port orchard
I have a 3.5 in lift and i need a new track bar with a new end, should i get the HD or should i replace it with a OEM?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Track Bar
- Thread starter totalvideo2
- Start date
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
if you can afford it....go HD.
the trackbar sees a lot of forces and needs to be up to the task. A lot of death wobble and other noises/problems are caused by a faulty trackbar/brackets
the trackbar sees a lot of forces and needs to be up to the task. A lot of death wobble and other noises/problems are caused by a faulty trackbar/brackets
xj_mike
NAXJA Forum User
- Location
- San Diego, CA
All though I have not install my lift (doing 3"-3.5", still collecting parts) I did buy a TNT track bar. It is MAJOR heavy duty and for the quality, it was the cheapest I could find. There are a couple cheaper but they didn't seem as HD. This one uses a new frame mount for the track bar, that makes the stock one look like tinfoil. I think it was about $235 with the mount. It is adustible as well. Might want to check them out.