Fozzy
NAXJA Forum User
- Location
- Lynnwood,WA
will a set of lower tj control arms work on an xj? my old man upgraded to a long arm kit and we have a set of treaflex lowers just lyin around am im thinkin i might be able to use them with my 3.5" lift
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Lower control arms
- Thread starter Fozzy
- Start date
CanMan
NAXJA Forum User
- Location
- Lake Tapps, WA
Measuring would be your best bet to start off with. I don't recall off the top of my head wether they would work or not. From eye to eye, the bushing sizes, lengths, ect..
- Location
- Hammertown, USA
They should yes.
Rubicon Express lists the same arms for TJ's and XJ's.
http://www.rubiconexpress.com/dynamic/mainpage.asp?folderid=1305
Rubicon Express lists the same arms for TJ's and XJ's.
http://www.rubiconexpress.com/dynamic/mainpage.asp?folderid=1305
jdogg4
NAXJA Forum User
- Location
- Evans Colorado.
They are the same control arms and will work with the 3.5 4.5 amount of lift.
scorpio_vette
NAXJA Forum User
- Location
- Milwaukee Wisconsin
yes they will...
i have a TJ and an XJ and regularly swap parts...................the front Suspension on XJ's is completely swapable with TJ's.
my 97TJ currently has a XJ front axle in it....(i wanted the high pinion, TJ's come with low pinion)
i have a TJ and an XJ and regularly swap parts...................the front Suspension on XJ's is completely swapable with TJ's.
my 97TJ currently has a XJ front axle in it....(i wanted the high pinion, TJ's come with low pinion)
