mack
NAXJA Forum User
- Location
- gone fishin....
1992 jeep cherokee xj.
MOTOR.
4.0HO
174k
new.
water pump, belt, rad, hose, steering box,
TPS, 10mm firepower plug wires.
turbo city cold air intake.
red top batt.
BODY
not rust at all.
Bushwacker cutout flares.
c4X4 rockrails.
PMW lower door armor.
FarmerMatt Steel taillights with full LED's
Hood vents.
front custom Hanson winch bumper with a Warn x8000i with AMsteel line and billiet fairlead, and HELLA1000's
with D-rings.
rear bumper is a Tomken with tire carrier and a hi-lift holder,
and a hitch mounted shackle.
inside in very very clean, no rips or stains.
custom camo headliner.
Alpine CD and speakers.
onboard CO2 tank.
power lock and windows.
AXLES
front is a hi-pinion dana30, is has been ALL rebuilt
new dana spicer 4.56's
all bearings and seals
full traction disco's.
Alloy outer axle seals.
Poison spyder rock ring.
Currie weld on control arm skids.
760x u-joints.
cut down lower control arm mount for better axle droop.
REAR..
the rear is a 8.25 with 27 spline Yukon alloy shafts.
full Detroit locker with 4.56's.
raised shock mounts.
zj disc brake covn. with all new brakes and lines.
both axles come with spares.
LIFT
front lift is...
RE 4.5"zj coils with ACOS that net about 6.75"
front shocks are bilstien 5150 in the 10" travel.
TnT Y-link longarms.
RE HD trackbar and HD frame mount.
REAR.
the rear lift is RE 4.5"packs with a 1"block and Tera 1.5" shackles.
rear shocks are Rancho 5000's...(yes i know!)
WHEELS AND TIRES.
wheels are steel rockcrawlers
they are 15x8 with a 4"BS.
tire are 35x12.5x15 Baja Claws that are near new!
also has a full size spare....(pluged!)
STEERING
the steering is Currie HD with a driver side over the knuckle.
new steering box and shaft/
zj pitman arm.
this steers just as good a as a car!
this jeep has been very very well takin care of, oil changed EVERY 2500 miles.
i have a folder about 4" thick of all paper work on this rig, and i KNOW i missed some of what i've put into this, as of right now, the only thing it need is a oil pan gasket or rear main and a horn.
please don't fill up this thread with "why are you selling" or stuff like that, i have over 12k into this jeep, i really don't think you can build one for this asking price.
$7600 OR B.O
MOTOR.
4.0HO
174k
new.
water pump, belt, rad, hose, steering box,
TPS, 10mm firepower plug wires.
turbo city cold air intake.
red top batt.
BODY
not rust at all.
Bushwacker cutout flares.
c4X4 rockrails.
PMW lower door armor.
FarmerMatt Steel taillights with full LED's
Hood vents.
front custom Hanson winch bumper with a Warn x8000i with AMsteel line and billiet fairlead, and HELLA1000's
with D-rings.
rear bumper is a Tomken with tire carrier and a hi-lift holder,
and a hitch mounted shackle.
inside in very very clean, no rips or stains.
custom camo headliner.
Alpine CD and speakers.
onboard CO2 tank.
power lock and windows.
AXLES
front is a hi-pinion dana30, is has been ALL rebuilt
new dana spicer 4.56's
all bearings and seals
full traction disco's.
Alloy outer axle seals.
Poison spyder rock ring.
Currie weld on control arm skids.
760x u-joints.
cut down lower control arm mount for better axle droop.
REAR..
the rear is a 8.25 with 27 spline Yukon alloy shafts.
full Detroit locker with 4.56's.
raised shock mounts.
zj disc brake covn. with all new brakes and lines.
both axles come with spares.
LIFT
front lift is...
RE 4.5"zj coils with ACOS that net about 6.75"
front shocks are bilstien 5150 in the 10" travel.
TnT Y-link longarms.
RE HD trackbar and HD frame mount.
REAR.
the rear lift is RE 4.5"packs with a 1"block and Tera 1.5" shackles.
rear shocks are Rancho 5000's...(yes i know!)
WHEELS AND TIRES.
wheels are steel rockcrawlers
they are 15x8 with a 4"BS.
tire are 35x12.5x15 Baja Claws that are near new!
also has a full size spare....(pluged!)
STEERING
the steering is Currie HD with a driver side over the knuckle.
new steering box and shaft/
zj pitman arm.
this steers just as good a as a car!
this jeep has been very very well takin care of, oil changed EVERY 2500 miles.
i have a folder about 4" thick of all paper work on this rig, and i KNOW i missed some of what i've put into this, as of right now, the only thing it need is a oil pan gasket or rear main and a horn.
please don't fill up this thread with "why are you selling" or stuff like that, i have over 12k into this jeep, i really don't think you can build one for this asking price.
$7600 OR B.O
Last edited:
