jeffrey803
NAXJA Forum User
- Location
- pennsylvania
i purchased a 89 cherokee aw4 will this tranny work with a 92 H.O.cherokee,i did the swap,and i have know gears,does anyone know if i have to change to the 89 TCU? i'm ready to smash a jeep.TIA.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
89 aw4 into a 92 will this work
- Thread starter jeffrey803
- Start date
Nevada City Sparky
Jeeper
- Location
- Nevada City, CA
I think you have to replace the flex plate (flywheel).
BrettM
NAXJA Forum User
- Location
- michifornia
the 89 tranny will plug right into the 92 TCU (87-96 are electronically compatible) but the 89 is a 21 spline output and the 92 is a 23 spline, so you'll need the t-case with the tranny.
BrettM
NAXJA Forum User
- Location
- michifornia
no, just keep the 92 flexplate. match the flexplate to the ignition system (renix or HO).Nevada City Sparky said:
jeffrey803
NAXJA Forum User
- Location
- pennsylvania
thanks for posting,do you mean to change the CPS sensor,i used my 92 sensor,didn;t get the 89 CPS.but the jeep starts up and runs fine.the transfer case was the 231.same as mine but the front case was cracked.so i just used my 92 tranfer case,bolted up just fine.TIA.
jeffrey803
NAXJA Forum User
- Location
- pennsylvania
jeffrey803 said:
