• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

alternator???

rg500

NAXJA Forum User
Location
Vancouver
Hi all, first time here.
I have a wierd alternator problem... start it up, voltage shows 12..a few minutes later I hear a click, and the voltage goes to 14...this is happening more and more oftren.
doesn't happen as much when it's cold, ie..first start in the morning is usually ok.
searched all the posts, didn't see an answer...

signed up to Alldata, still didn't see anything....

any ideas?..
thanks
 
reading is from both.... 14V on the panel is the same as 13.9V on the meter...
when the panel reads approx. 12V, the meter reads 12.1V..


it runs at 12v...then clicks and runs at 14V....I do have a code 41...alternator field....but why is it intermittant?....hmmm....
 
I had a truck that would do that, would read very low voltage, and I would actually have to go out and tap the alt, to get the brush(s) to seat properly. You may have a sticky brush(s). Just a thought.
 
overhead console, compass and temp. indicators don't work...also heating controls lights on the dash, but that's been off for a while...

Thanks for the replies, guys...
 
Back
Top