-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Unit hub bearing
- Thread starter bretto
- Start date
BingBing
NAXJA Forum User
- Location
- Chicopee, MA
Possibly. But watch out some TJ's had different style front rotors.
- Location
- Terra Firma
NObretto said:
Ramsey
NAXJA Forum User
- Location
- Shreveport, LA
whats different?
- Location
- La Habra, CA
Hell, a hub assembly from an 01 XJ won't even fit a 92. I think this has been covered a couple of times.
Ramsey
NAXJA Forum User
- Location
- Shreveport, LA
when was the change?
- Location
- La Habra, CA
1999
Wil Badger
NAXJA Forum User
- Location
- Utah
there are several different ones .the offset was different depending on year and rotor option.
I was looking at my rotors and one is thinner than the other where it gets sandwiched between the hub and wheel about 1/8 inch or so. The hubs measure the same though. I have never replaced the rotors so they may be factory or prev owner did it. Stops and rolls just fine. So with the hubs being the same, are one of the rotors the wrong type possibly?