Rustys HD Trackbar and Low Susp. Height

I asked this on another board and got no answer so here 'goes.

Scored a HD Rustys Adj. Track Bar from a friend despite the fact that i dont really need it at the moment.

Is there going to be clearance issues with this Trackbar and the Diff. at such a low suspension height? (2") Is the TB going to contact the center section on my LP30 as the suspension cycles while driving and while flexing offroad?

Probably not a good idea.

I had Rusty's track bar in my MJ with a 4" lift. When I dropped it to stock height, the track bar was riding on the front diff cover. A 2" lift would probably clear it at static height, but unless you extend the bump stops it will probably make contact when the suspension compresses.

You probably won't be able to thread it in far enough to work with 2" lift.