- Location
- Westminster, SoCal
Do I remember correctly that they are same as OEM bushings? Btw I have the older style bushings in my RE's (I know RE changed them in a last year or two and my arms are about 3~4 years old).
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
RE LCA rubber bushings
- Thread starter Kejtar
- Start date
ECKSJAY
Water is dirty
- Location
- Covington, WA
The older ones are indeed OEM bushings.
- Location
- Westminster, SoCal
Any particular ones better then the others? I am planning to replace 'em with NAPA ones at this point.ECKSJAY said:
canadianwheeler
NAXJA Forum User
- Location
- canada
I used NAPA bushings and havent had any problems. But they are pretty hard to install . You are gonna need a press. Heres a link
http://www.stu-offroad.com/suspension/bushing2/bushing-1.htm
http://www.stu-offroad.com/suspension/bushing2/bushing-1.htm
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Press in on the old ones. The new "hour glass" design on the mount utilizes a RE specific bushing and goes in very easily (rubber mallet and some grease and one "pop").
- Location
- Westminster, SoCal
Isn't upper and lower same? That writeup lists two different part numbers
upper: NCP267-1372 and the lower is NCP267-3409.
upper: NCP267-1372 and the lower is NCP267-3409.
gcurtis
Shirley Temple was a nug.
- Location
- Long since gone.
Kejtar said:
IIRC the upper and lower are different sizes.
http://naxja.org/forum/printthread.php?t=7418&pp=30
Last edited:
- Location
- Westminster, SoCal
You're right, I forgot that they use different bolts! Anyways, got a pair on order and should be @ my local Kragen tomorrow AMgcurtis said:
