Wf Xj Swap Meet

[BOB]

should we have a swap meet thread?
maybe we can wheel and deal and bring the parts to swap at WF.

...BOB

[Lawn Cher']

Great idea BOB! I'll start. I have a set of (5) 32x11.5R15 Mud Kings for sale. I also have several sets of rims, in both aluminum and steel, OEM and aftermarket. I also have a MJ shortbed cap, and a plastic bedliner as well. I also have a 3" Skyjacker MJ lift kit. I also have several sets of D35 shafts, both c-clip and non-c-clip. I also have a non-c-clip D35 geared to 3.73, as well as a Detroit locker for D35 non-c-clip. I have a 4.0/AW4/231 drivetrain w/ 123k miles from a '88 MJ, and another AW4/242 combination.

[HaleYes]

Good idea BOB! I'll start.

I've got a set of D35 c-clip axles out of my XJ. They'd make good spares for someone. They can be yours for a cold beer.:wave:

[Lawn Cher']

How can you start if I already started?

[HaleYes]

How can you start if I already started?

It was over after your post. I just re-started it.:laugh3:

[BOB]

I have four Dayton Timberline A/T's 225/75/15
on stock Jeep rims

I have a Dana 35 with a Detroit locker
new brakes, extra yoke and extra shafts.

* * I am looking for a Ford 8.8 diff guard * *

...BOB

[XJ_ranger]

* * I am looking for a Ford 8.8 diff guard * *


this guy is donating a winch bumper for us - and makes some reasonably cheap diff guards -
http://www.nates4x4.com/catalog/product_info.php?cPath=24&products_id=38

[XJ_ranger]

I also have several sets of D35 shafts

id bet if you brought thoes - the price to the guy with the busted d35 would be quite a bit more than you can get right now :D

[afd516]

Good idea BOB! I'll start.

I've got a set of D35 c-clip axles out of my XJ. They'd make good spares for someone. They can be yours for a cold beer.:wave:


I might take a couple of the d35 axle shafts for a small fee like you give me some beer.

[HaleYes]

I might take a couple of the d35 axle shafts for a small fee like you give me some beer.
You want my beer and my D35 shafts???

Two words:

Yard Art :D

[XJ_ranger]

if anyone needs them or wants them i have a few versions of a certain drafting software (2d) (2005) (think "Auto") and a certain 3D drafting software (2004) (think "Solid") that i can make copys of...

[Dirk Pitt]

if anyone needs them or wants them i have a few versions of a certain drafting software (2d) (2005) (think "Auto") and a certain 3D drafting software (2004) (think "Solid") that i can make copys of...

Bring me a copy of the Solid stuff.

Thanks in advance.

[Lawn Cher']

Bring me a copy of the Solid stuff.

Thanks in advance.

Me too, I have the 2000 version now and it lacks certain tools that I find quite handy.

[HaleYes]

Count me in too Ranger. I've never played with that stuff before, but I'd like to give it a shot.

[seanR]

Count me in too Ranger. I've never played with my self before, but I'd like to give it a shot.

[seanR]

Here is what I have...
RE-3700 SF2 lower control arms
RE-3781 SR2 upper control arms
RE-1310 4.5" coil springs
RE-1334 2" coil spacers
The lower CA have the nice "super flex" re-buildible johnny joints in them, the uppers are just rubber bushings.
I re-bushed all of the control arms this fall, one of the uppers has a tear in the rubber bushing, I have an extra, I will throw it in.
Everything together new at current pricing is $584.80
I will take 1/2 of that or about $300.00

[Rev Den]

I got a front sway bar.

Maybe a once used winch cable.

2 dr side windows

Anyone?

Rev

[Fore Wheeler]

I got a front sway bar.

Maybe a once used winch cable.

2 dr side windows

Anyone?

Rev

ha ha.

in that case, I have a slightly used roof for a 4 door, and some windows that need just a bit of glue.

best offer.

[ILLXJ]

Heres my list:
Pre 97 bumpers F&R gold-need paint
Stock coils 2pr.
Battery tray
8.25 u-bolts 2 sets
Stock shackles
8.25 brake drums 2
AW4 cross member
Stock control arms 1 set
Under hood insulation
E-brake assy. from handle to adjuster
DS aw4/8.25 27.5" long
Stock upper track bar bracket
Vac. assy. for cruise
96- 35 & 32 tooth speedo gear
Gray interior from a 89
89 black grill & headlight bezels
FDS 4cyl-aw4 25.5" comp. & 28" extended, looks like a toothpick
89 brake calipers 2
RDS 4cyl-aw4/d35 32.5"
2.5l engine parts
D35 open 4.56 gears complete
D30 3.55 gearsw/carrier
8.26 3.55 gears
F shocks KYB GR-2 11.75" comp. & 20" extended
LH nut strip
4 XJ rims 15x7 3.75 bs. look like American Racing Baja. $120 for the set .
http://i6.photobucket.com/albums/y249/ILLXJ/home/MVC-031S.jpg

If you want something PM me. I'm not going to bring it if nobody wants it. JIM.

[ILLXJ]

I also have 1 33x12.5 BFG MT. It is close to new. Tread depth is 18/32. New according to BFG is 21/32. Any reasonable offer accepted. Pics. can be had if needed. JIM.

[4ward]

if anyone needs them or wants them i have a few versions of a certain drafting software (2d) (2005) (think "Auto") and a certain 3D drafting software (2004) (think "Solid") that i can make copys of...

I'd like a copy of both. Thanks.

I've got:
couple 14 bolts. $100 each
matching Hp44 &9". $450
242 w/sye. 21 spl. $250
231 w/sye. 21 spl. $250
D 300- $150
Eaton w/chrome cover $150

[Fore Wheeler]

I have a np 231 case out of a 99, can bring and trade for a ben franklin.

now that's a deal.

[seanR]

The above mentioned stuff is gone.
But now I have Stock steering stuff,
H.D. tie rod and stock drag link, all with newer TRES.

[4ward]

Forgot, I've got 2 23spl. aw4's $150 each.

[Rev Den]

Got a front sway bar, 2 dr rear windows.

Free to a good home.

Rev

[Fore Wheeler]

Forgot, I've got 2 23spl. aw4's $150 each.


how bout a 23 spline 231, pre 96???

[4ward]

how bout a 23 spline 231, pre 96???

No soup for you.

[BRIANHO13]

I have a heavy duty tie rod for the stock set up sold by rusty's-$50 (100 new only about 1 year old on a trail only rig)

4 ar 767's 5 on 4.5 3.75" back spacing $75 takes all four, pretty good shape.

[HaleYes]

I have a heavy duty tie rod for the stock set up sold by rusty's-$50 (100 new only about 1 year old on a trail only rig)

4 ar 767's 5 on 4.5 3.75" back spacing $75 takes all four, pretty good shape.
PM sent

[XJ_ranger]

I'd like a copy of both. Thanks.

D300- $150


$100 CASH and a copy of some software?:D

[4ward]

$100 CASH and a copy of some software?:D

How about $125 and the software?

[IndyXJ]

It's useless to me so here is what I have for someone if needed...

FREE- STOCK rear driveshaft for 99XJ (unknown what stock rear ds's fit...)
About 77Kmiles on it.

FREE- stock pitman arm off my 99XJ IF I can find it...no guarentees. In garage somewhere...

FREE-My old 3.55 R+P from the 8.25 and D30 out of my 99. (don't think usable on 00+) Hate to just throw it out. Oh yeah, D30 carrier as well, FREE too. About 85K miles on this stuff.

PM me here and I will go with first come first served. I still haven't firmed up my travel plans, but there to wheel Saturday, but might show up Friday sometime unknown.

Thanks,
Bill -IndyXJ

[TRL WGN 1]

I have a couple things I found out in the garage.

I have a set of non-c clip d35 axles. I bought them for spares and never used them. Still wrapped in the same plastic as when I got them. BO

Also, have a stock t-case skid. Will take $5 or a couple beers, whichever comes first.

[XJ_ranger]

FREE- stock pitman arm off my 99XJ IF I can find it...no guarentees. In garage somewhere...


id like that pitman arm - I did a shitty job drilling mine out when i put heims in my steering, and I want to go back to a TRE there anyway

you have a PM..

[XJ_ranger]

anyone have a passenger side rear tail light box that will fit a 92?

I sorta... broke mine saturday...

[IndyXJ]

Wrote you back, but yes, it's yours if I can find it which I'm confident I can! :sunshine:


id like that pitman arm - I did a shitty job drilling mine out when i put heims in my steering, and I want to go back to a TRE there anyway

you have a PM..

[BRIANHO13]

anyone have a passenger side rear tail light box that will fit a 92?

I sorta... broke mine saturday...

I need a drivers side for a 98 if anyone has one.....the red tape doesn't hold up too good.

[85xjwoody]

Ranger, I have a rear right taillight for you. $5.00 and it is yours. Even still has the bulbs and wiring all the way to the plug.

Trl Wgn, I will take the skid if it will fit my jeep. Bring it along and if it fits I will take it off your hands.

Kim.

[XJ_ranger]

Ranger, I have a rear right taillight for you. $5.00 and it is yours. Even still has the bulbs and wiring all the way to the plug.


you got it Kim!

[TRL WGN 1]

Trl Wgn, I will take the skid if it will fit my jeep. Bring it along and if it fits I will take it off your hands.

Kim.

Kim,

It should fit just fine. Had it on my 88 woody. I spot welded some studs on to bolt it on, as the factory skid is supposed to have some bolt things to fit the holes in the frame. Held up fine for me and I just ground the studs back off, once I went to a different style.

[What Rd]

I'd like a copy of both. Thanks.

I've got:
couple 14 bolts. $100 each
matching Hp44 &9". $450
242 w/sye. 21 spl. $250
231 w/sye. 21 spl. $250
D 300- $150
Eaton w/chrome cover $150
Hey Sean
What year is your HP44? Would you separate it from the 9"?
Jeff

[XJ_ranger]

How about $125 and the software?

clear out your PM box...

[What Rd]

clear out your PM box...
:wave: :wave:
No doubt - I tried that too!

[lesslimited]

Anyone interested in a nice back seat?
http://community.webshots.com/photo/93067076/1203824431049957266tldTmF
Will trade for one good beer, or a drivers side front marker light.

[87manche]

I have a set of non-c clip d35 axles. I bought them for spares and never used them. Still wrapped in the same plastic as when I got them. BO

Interested, I don't have any spare shafts yet, and I doubt I'm gonna find any before WF. I'd hate to be "that guy" on the trail.

[HaleYes]

I've got a set of D35 c-clip axles out of my XJ.

Anyone want these boat anchors? I'm not bringing them if noone wants them.

[4ward]

Sorry, pm box cleared.

[LBEXJ]

I have an Aluminum Truck Bed Cap that was made for an MJ Long Bed that I have no use for. I can post up pics if anyone may be interested in it. It's black, has the wide hinged side glass, and includes the hold down clamps.

Les

BTW: I'm looking for a set of used 15" x 8" Chevy Rims ( 5 on 5 bolt pattern).

[87manche]

What would you want out of the MJ bed cap. and if you could post a pic that would be great too.

[TRL WGN 1]

Interested, I don't have any spare shafts yet, and I doubt I'm gonna find any before WF. I'd hate to be "that guy" on the trail.

I will bring them along then

[87manche]

what do you want for them?
I'm already blowing most of my wad on the lift kit from Lawn Cher.

[TRL WGN 1]

what do you want for them?
I'm already blowing most of my wad on the lift kit from Lawn Cher.

How much you got? :D

Seriously, I think $10 a shaft is fair. I paid $75 for the pair back when people still used D-35's. So, $20 delivered to WF for both should be good, don't you think?

[BOB]

87manche, do yourself a favor. with a turdy five, pick
up an extra yoke and strap kit. That'll save you some bucks.
I'll tell you my story of woe when I see ya.

...BOB

[LBEXJ]

What would you want out of the MJ bed cap. and if you could post a pic that would be great too.
By the time I got done with the starter on the pickup, it was too dark to take a decent picture. (Mark ... some asshat decided not to mount the starter with the support bracket!) I'll post up one tomorrow evening. If I can find a pic of my old MJ, I'll scan it and post it up ... it will give you an idea what it looks like.

Not sure what it's worth in order to give you a price.

Les

PS: You may not have enough "wad" left! :laugh3:

[85xjwoody]

87manche, do yourself a favor. with a turdy five, pick
up an extra yoke and strap kit. That'll save you some bucks.
I'll tell you my story of woe when I see ya.

...BOB

I have an extra yoke and straps for a d35 if someone would like me to bring them along. Let me know.

Kim.

[87manche]

How much you got? :D

Seriously, I think $10 a shaft is fair. I paid $75 for the pair back when people still used D-35's. So, $20 delivered to WF for both should be good, don't you think?
Done! Always good to ave spares!

[XJ_ranger]

I'm already blowing most of my load in Lawn Cher.

Fixed :D

[87manche]

Fixed :D
man, that's just wrong.
but if given the chance....

[TRL WGN 1]

Done! Always good to ave spares!

I agree, which is how I ended up with them. I never needed them, although I can't sell the ones out of my old d-35 because the splines are twisted, just not broken yet!
They are loaded in the Jeep and will arrive Sat. morning.

[87manche]

I will likely be arriving Sat morning also, convoying with onetonxj.

[TRL WGN 1]

Interested, I don't have any spare shafts yet, and I doubt I'm gonna find any before WF. I'd hate to be "that guy" on the trail.


Hey Manche,
I still have those shafts!

[TRL WGN 1]

Ranger, I have a rear right taillight for you. $5.00 and it is yours. Even still has the bulbs and wiring all the way to the plug.

Trl Wgn, I will take the skid if it will fit my jeep. Bring it along and if it fits I will take it off your hands.

Kim.


Hey Kim,
I am still thirsty!

[87manche]

Hey Manche,
I still have those shafts!
yeah, I forgot to find you at the campfire. I'll make arrangements, I'm sure you'd like to have them out of your garage, and I'd like to have them :)

[TRL WGN 1]

yeah, I forgot to find you at the campfire. I'll make arrangements, I'm sure you'd like to have them out of your garage, and I'd like to have them :)


That's cool
Not a big deal, as they are in What Rd's garage right now :D (They got left in the back of his truck)

[What Rd]

That's cool
Not a big deal, as they are in What Rd's garage right now :D (They got left in the back of his truck)
Did I forget to mention my handling and storage fees?

:eek:

[85xjwoody]

Hey Kim,
I am still thirsty!

Sorry about that. I owe you a couple of beers or some cash. You let me know what you would like to do. I totally forgot that I got that from ya.

Again sorry.

Kim.

[Gil BullyKatz]

Don't feel too bad...

For WF '05

I forgot a set of XJ Bushwacker flares that I bought from SeanR for $10 in the campground!

[seanR]

Don't feel too bad...

For WF '05

I forgot a set of XJ Bushwacker flares that I bought from SeanR for $10 in the campground!
They were only worth $5.00!

[TRL WGN 1]

Sorry about that. I owe you a couple of beers or some cash. You let me know what you would like to do. I totally forgot that I got that from ya.

Again sorry.

Kim.

No hard feelings. It is just as much my fault as well, as I didn't make it out to the camp fire after the raffle. My partners in crime were ready to hit the sack, so we split.

Whatever is easiest for you.

[What Rd]

No hard feelings. It is just as much my fault as well, as I didn't make it out to the camp fire after the raffle. My partners in crime were ready to hit the sack, so we split.

Whatever is easiest for you.
Make 'em come out to the chicken farm and wheel!
:jester:

[85xjwoody]

Make 'em come out to the chicken farm and wheel!
:jester:

Chicken farm and wheeling. Sounds interesting.

Kim.

[TRL WGN 1]

Chicken farm and wheeling. Sounds interesting.

Kim.

Oh, it can be.

Actually, it is just named that because of the 170' chicken coupe that sit on the property. Used to actually be a chicken farm, now it is known as The Chicken Farm. We have 85 acres of trails there. My own local testing grounds.