Toe in or Toe out for no Death Wobble

[BIG98XJ]

Finnaly goona get around to installing my drop brackets after that I`m goona get it aligned. I`m tired of damn death wobble!:mad: So whats the best alignment specs. THanks alot

[Beezil]

I dial in a teenie bit of toe-in.....

[JJ13]

an eighth of an inch of toe in is standard for Radial tires...you want it dead-nuts if your running bias-ply. I had 1 1/2 of toe in after my last lift, the death wobble went away immediately after I set it closer to zero.

[BIG98XJ]

so yall are saying an eversoslighty amount of toe in will do me good??!!

[Eagle]

'94 FSM specifies 0 toe-in, with +/- 1/32" acceptable.

2000 FSM specifies total toe-in of 0.25 degrees (NOT inches), which would be 0.125 degrees per wheel, with an acceptable range of 0 to +0.45 DEGREES

1/8" is too much. The outer edges of the tires will scrub off rapidly.

[BIG98XJ]

I plan on sporting some 37x12.5 SSRs soon wich are a radial, I think I`m goona have em set 1/2" of toe it, what yall think??!!