So.Cal Karma Thread Part Deux

[Blazair]

An update Sintax's So.Cal Karma Thread
--------------------------------------------------------------------------------
To claim this you must offer something up to the group as well. You can decide if you are willing to ship it or require pickup. I'm sure I'll think of a few more rules as this game goes on, lets see if this catches on.

-Scott
I have a pair of '99 roofrack cross bars taking up valuable shelf space in my garage. Who wants em?

[RWKHausSupply]

Off 1990
front bumper (crome in decent no dent cond)
Rear bumper - a little damage on teh drivers corner (no much) - u pull it
hitch - u pull it

within 2 weeks
stock rear springs
full d35
front stock springs
stock alum rims and 235 tires in decent condition

[JohnX]

http://www.naxja.org/classifieds/showproduct.php?product=2645&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2646&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2650&sort=1&cat=500&page=1

Some beat tires, Stickon window mount CB antannae, 4.5" rear shocks.

Also have a set of 2 inch lift blocks with built in degrees. Cast Iron.

Free to any one who wants them. Let the karma roll...

[RWKHausSupply]

http://www.naxja.org/classifieds/showproduct.php?product=2645&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2646&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2650&sort=1&cat=500&page=1

Some beat tires, Stickon window mount CB antannae, 4.5" rear shocks.

Also have a set of 2 inch lift blocks with built in degrees. Cast Iron.

Free to any one who wants them. Let the karma roll...

You still havent been able to unload those tire huh?

[cal]

http://www.naxja.org/classifieds/showproduct.php?product=2645&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2646&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2650&sort=1&cat=500&page=1

Some beat tires, Stickon window mount CB antannae, 4.5" rear shocks.

Also have a set of 2 inch lift blocks with built in degrees. Cast Iron.

Free to any one who wants them. Let the karma roll...

How many degree's?

[RWKHausSupply]

How many degree's?

I have a set also but as to what degree... Who knows. They are being removed from a set of new lift springs that come with them for stock setups to align the 4.5" set. I am removing them and setting up the ubolt elim to the right degree before welding.. Your yours if you wnat them.

[tcm glx]

http://www.naxja.org/classifieds/showproduct.php?product=2645&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2646&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2650&sort=1&cat=500&page=1

Some beat tires, Stickon window mount CB antannae, 4.5" rear shocks.

Also have a set of 2 inch lift blocks with built in degrees. Cast Iron.

Free to any one who wants them. Let the karma roll...

I might want to pick up those shims......put me down for them when i get the LSD this weekend!

[Blazair]

full d35

I'll take that D35. Just let me know when its out. No rush!!! :)

[cracker]

I have some spare doors at the house I will give away.

*I have a really stripped (no glass, no weather stripping, etc) blue passenger side door. It looks really ugly but will work well after it is installed and painted. I don't recall any dents in it. For free.

*I have a set of passenger doors from an 80's XJ. They are cream in color and are pretty ugly. They have glass in them. I think they are manual locks.windows as well. It looks really ugly but will work well after it is installed and painted. I think there might be a couple of door dings on these doors but not too bad. I bought these from a junk yard a couple of months ago. I never used them (obviously). For free.

*I have a '94 proportioning valve for free

*I have a rear sway bar for free (why would anyone want this?)

*33" Pro Comp MT (I think) with no tread left. 'OK' as a spare. 16 inch rim. Free.




I say free but you might be asked for a (non-sexual) favor in the future (i.e. working on my junk :D). I will not bring the doors to a M&G but I will bring the other stuff. I live in South Pasadena.

Let me know

[JohnX]

Tires...Haven't tossed them yet because if nobody want them I am going to groove them for the sand. I spend some time in the dunes.


Blocks....I have no idea what degree they are, but they came with a 4.5" lift kit.

[cracker]

http://www.naxja.org/classifieds/showproduct.php?product=2645&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2646&sort=1&cat=500&page=1
http://www.naxja.org/classifieds/showproduct.php?product=2650&sort=1&cat=500&page=1

Some beat tires, Stickon window mount CB antannae, 4.5" rear shocks.

Also have a set of 2 inch lift blocks with built in degrees. Cast Iron.

Free to any one who wants them. Let the karma roll...

John,

I'll get those tires from you. I need something to be able to move my junk around as I do the new axle/bolt pattern change and what not.

PM me and we'll figure it out.

Thanks

-Avery

[99xjache]

I have a stock rear sway bar, stock front and rear bumbers (black and in good shape) with endcaps and brackets, all from a 99.

Free, just gotta pic em up.

Aaron

[shelbyluvv]

I will take the front bumper and caps! I really need it. Can you hang on to it for a few weeks?

[shelbyluvv]

OK, since I am begging for a lot of cheap parts to fix my MJ. I will offer these 1" poly spacers, brand new, free if you can get me a smoking deal on a left fender with flare or a complete header panel.

[Mr.OverKill]

i have coils from a tera flex 3" lift for a wrangler ( YJ? ) front and rear and the sway bars from my XJ ( 85 ) and most the glass from the front doors and four sets ( i think its four) of stock or slightly longer shocks off my 85 and the wrangler
i also have a D35 housing free
and curious what some one might give for a HP30 ( disco ) complete
all for free [except the D30] ( favors in the future mabi )

[Mr.OverKill]

am i a thread killer or what?? half the threads i post on die as soon as i post a reply. its kind of weird.:eek:

[johnnyc]

I'll keep it alive...

I have both front doors (white). Right one is available now. Left one will be available soon. Power windows and door locks. Gray door panels. One small dent in each door.

Pair of <96 tail lights in good condition. No cracks.

Stock rear driveshaft.

Dana 30 carrier and 8.25 27-spline carrier for stock gears.

Stock trackbar and rear swaybar.

For free. Moving soon. Gotta clean out the garage.

[Clean Racing]

I'll keep it alive...

I have both front doors (white). Right one is available now. Left one will be available soon. Power windows and door locks. Gray door panels. One small dent in each door.



Johnny..

Dibs on the doors...when your done with them of course..

Scott.

[JohnX]

Stock rear driveshaft for 97 with 231. Removed from mine...new rear u-joint installed, was going to put it in my wifes 94, but it doesn't fit.

Dakota add a leafs....very stiff, and worth about 5" lift on XJ...made for a 3" lift on dakota. Bough about 6 months ago, ran for about 4 months....too stiff for me. Good for mall crawler or someone who tows/loads jeep heavy.

[Mr.OverKill]

who is closer ( with the rear d/s ) to san diego? i need one to take to the d/s shop to have it lengthened. ( i cant afford a SYE and D/S combo yet)

[JohnX]

who is closer ( with the rear d/s ) to san diego? i need one to take to the d/s shop to have it lengthened. ( i cant afford a SYE and D/S combo yet)
probably Johnny...shoot up the 5.

Too bad i didn't post it sooner....I went down to coronado a few days ago for some parts.

[saki669]

I've got 2 rear doors if anyone wants them. They are out of my 00 Solar Yellow, power locks,windows,factory tint. My wife would love if you picked them up!

Also have a LP D30 housing with stock 3.55 gears.

29 spline 8.25 carrier loaded with spider gears and black widows.

3.55 ring and pinion.

[RWKHausSupply]

I Need a D30 carrier for a 4:56 gear set.. Anyone?

[itsHud]

All the parts that I have are off a `98. Front & Rear springs, Trackbar, rear swaybar, Rear DS, Fuel pump /sending unit. Also for sale, Terra flex 1.5" rear shackles(greasable)$40, Bilstein OE shocks(4)$25. Down here in San Diego or I can bring to Calico in Feb.
Ken

[Kejtar]

All the parts that I have are off a `98. Front & Rear springs, Trackbar, rear swaybar, Rear DS, Fuel pump /sending unit. Also for sale, Terra flex 1.5" rear shackles(greasable)$40, Bilstein OE shocks(4)$25. Down here in San Diego or I can bring to Calico in Feb.
Ken
is the fuel pump/sending unit of a 98? why did you pull it? If it's working I am interested as mine lets the fuel bleed back to the tank.

[cracker]

All the parts that I have are off a `98. Front & Rear springs, Trackbar, rear swaybar, Rear DS, Fuel pump /sending unit. Also for sale, Terra flex 1.5" rear shackles(greasable)$40, Bilstein OE shocks(4)$25. Down here in San Diego or I can bring to Calico in Feb.
Ken


WOW!

This is supposed to be the Karma Thread!

Thsi is supposed to be FREE STUFF that you are offereing in hopes of good Karma. :lecture:

[Captain Ron]

WOW!

This is supposed to be the Karma Thread!

Thsi is supposed to be FREE STUFF that you are offereing in hopes of good Karma. :lecture:

The "Verbal Terrorist" worried about Karma. I wonder what form yours will take. :D

--ron

PS: In the spirit of the thread, that was a free bash. :D

[Blazair]

I've got 2 rear doors if anyone wants them. They are out of my 00 Solar Yellow, power locks,windows,factory tint. My wife would love if you picked them up!
I'll take em for the Ronald McDonald Mobile. ;)

[cracker]

The "Verbal Terrorist" worried about Karma. I wonder what form yours will take. :D

--ron

PS: In the spirit of the thread, that was a free bash. :D

I've given up on Karma.

My new motto: NO GOOD DEED GOES UNPUNISHED :D

[itsHud]

is the fuel pump/sending unit of a 98? why did you pull it? If it's working I am interested as mine lets the fuel bleed back to the tank.
I pulled this pump and sending unit in a last hope of fixing a problem which kept throwing codes.(and other rough running issues) It is out of a '98, my new unit did'nt solve the problem. To the best of my knowledge it works fine. Ken

[Captain Ron]

I've given up on Karma.

My new motto: NO GOOD DEED GOES UNPUNISHED :D

Oh, your joining my mantra now are you? :D

--ron

PS: I'm still dumping parts from the XJ and MJ... backchannel.

[Clean Racing]

Bilstein OE shocks(4)$25. Down here in San Diego or I can bring to Calico in Feb.
Ken

Ken.

What are the lengths of the oe shocks... I may be really interested... Thanks..

Scott.

[itsHud]

Ken.

What are the lengths of the oe shocks... I may be really interested... Thanks..

Scott.
Scott, Bilsteins measure 20.5" center-center, rear. Fronts are 22.5" from bottom center to top of lower bushing @ fender. If that makes sense? PM me if you have more ?? Ken

[Clean Racing]

Scott, Bilsteins measure 20.5" center-center, rear. Fronts are 22.5" from bottom center to top of lower bushing @ fender. If that makes sense? PM me if you have more ?? Ken

Ken.

would you have the compressed and extended measurements... I think they might work for what I am doing on the rear right now... Thanks..

Scott.

[Bent]

front and rear and the sway bars from my XJ ( 85 ) and most the glass from the front doors

The front sway bar I can use on the MJ. The window glass, For doors w/ wind wings? What shape are the front in. Mine have a couple decent scratches/grooves in them.


TIM

[Clean Racing]

Ok cleaning up the garage again... these things need a new home...

1. Rear hatch shocks 84~96 I presume.. In good shape
2. Transmission cooler from 95 Ford E350
3. 2" rough country lift blocks-tapered.. a little rusty
4. Drawtite trailer wiring kit- box for car side

I will hang onto this stuff for a week and then its getting round filed... Thanks...

[Grzz701]

Alright going to be down in barstow Feb 2-5 have a few spares that I can bring down with me if somebody is willing to come on out and get them.
stock hood painted black.
d30 front housing with 4.10 gears and long side axle shaft (inner C to Inner c).
stock steering tie rod and drag link.
front drive shaft, shortened by a 1/2 inch.
I will have limited space, so let me know if you want or needed anything and I will bring it down.
Mark.

[cal]

Ok cleaning up the garage again... these things need a new home...

1. Rear hatch shocks 84~96 I presume.. In good shape
2. Transmission cooler from 95 Ford E350
3. 2" rough country lift blocks-tapered.. a little rusty
4. Drawtite trailer wiring kit- box for car side

I will hang onto this stuff for a week and then its getting round filed... Thanks...


I'll take the transmission cooler if its in fair shape.

[ruggedjeep]

Free to good Jeeper home:

97+ stock bumper black couple scratches no brackets

Stock Gas Tank Skidplate(metal) not sure what year, i beleive its off a 95(thats what the junkyard said) I made it fit my 97 so maybe you can too. (its painted blue BTW)

Must be picked up, or i can haul it to the next Valley meet and greet.

[Clean Racing]

I'll take the transmission cooler if its in fair shape.

Its Yours... in great shape... I opted for the big B&M cooler myself, or else would have used this one...

Scott.

[5-90]

You willing to ship those taillights? I'm always needing some - I'll cover shipping, I just need to know how much...

5-90 (95124, Residential.)



I'll keep it alive...

I have both front doors (white). Right one is available now. Left one will be available soon. Power windows and door locks. Gray door panels. One small dent in each door.

Pair of <96 tail lights in good condition. No cracks.

Stock rear driveshaft.

Dana 30 carrier and 8.25 27-spline carrier for stock gears.

Stock trackbar and rear swaybar.

For free. Moving soon. Gotta clean out the garage.

[ruggedjeep]

Free to good Jeeper home:

97+ stock bumper black couple scratches no brackets

Stock Gas Tank Skidplate(metal) not sure what year, i beleive its off a 95(thats what the junkyard said) I made it fit my 97 so maybe you can too. (its painted blue BTW)

Must be picked up, or i can haul it to the next Valley meet and greet.
Okay gastank skidplate has been called for.. :lecture:

[RWKHausSupply]

Alright going to be down in barstow Feb 2-5 have a few spares that I can bring down with me if somebody is willing to come on out and get them.
stock hood painted black.
d30 front housing with 4.10 gears and long side axle shaft (inner C to Inner c).
stock steering tie rod and drag link.
front drive shaft, shortened by a 1/2 inch.
I will have limited space, so let me know if you want or needed anything and I will bring it down.
Mark.

I will take the driveshaft. Well if its for a auto with 6cyl originally?

[johnnyc]

You willing to ship those taillights? I'm always needing some - I'll cover shipping, I just need to know how much...

5-90 (95124, Residential.)
Sorry...should have updated.
I'll keep it alive...

I have both front doors (white). Right one is available now. Left one will be available soon. Power windows and door locks. Gray door panels. One small dent in each door. Claimed by Clean-RC

Pair of <96 tail lights in good condition. No cracks. Claimed by Jump This

Stock rear driveshaft.

Dana 30 carrier and 8.25 27-spline carrier for stock gears. Trashed

Stock trackbar and rear swaybar.

For free. Moving soon. Gotta clean out the garage.

[5-90]

Bugger. Still, I'll play!

I just pullled the stereo for replacement in my 88. JVC El Kameleon - I've got to get the remote out for it (I've got to pull the seats and clean out my rig anyhow.) Wiring harness that came with the radio is still included, and it's market. No manual.

Why'd I replace it? No "short-term" memory - but it should be perfect for a "trail" rig, where you've got to set everything anyhow. I'll hold onto it for a fortnight before I toss it, in case anyone is interested. It's a sliding face CD player, in case you were wondering, with one set of "preamp outs" for a sub amp.

Like I said, it wouldn't be for a daily driver - it resets everytime it gets powered off. But, if you don't mind playing with that, and it still sounds good, I'll ship it to you if you'll cover the bill. Otherwise, free. (Local pickup or train OK as well.)

PM or email for details (dragonland2001ATyahooDOTcom)

5-90

[Cupcake]

man either i am gonna get really good karma or i am just plain stupid.... you choose

pro comp front lift kit!
coils, lcas, trackbar bracket, umm dunno what else but it was on my jeep...
(some bolts may be missing) take it away from me

stock rear leaves

let me know if anything looks good to you

cupcake

[cracker]

man either i am gonna get really good karma or i am just plain stupid.... you choose

pro comp front lift kit!
coils, lcas, trackbar bracket, umm dunno what else but it was on my jeep...
(some bolts may be missing) take it away from me

stock rear leaves

let me know if anything looks good to you

cupcake

I'll take it for a future project ;)

[Cupcake]

you give me your 8.8 and it is a deal nah all you have to do is come and pick it up

cupcake

[cracker]

you give me your 8.8 and it is a deal nah all you have to do is come and pick it up

cupcake

Maybe at Cal's later on Saturday?

[joehiker]

pro comp front lift kit!
coils, lcas, trackbar bracket, umm dunno what else but it was on my jeep...
(some bolts may be missing) take it away from me

Day late and a dollar short.

If for some reason Cracker doesn't take it, put me next in line!

I am adding a "bastard" pack AAL to my rear shackle and need some 3" coils for the front or a 1-2" coil (up-country or ZJ) to combine with my BB spacer...

[cracker]

Day late and a dollar short.

If for some reason Cracker doesn't take it, put me next in line!

I am adding a "bastard" pack AAL to my rear shackle and need some 3" coils for the front or a 1-2" coil (up-country or ZJ) to combine with my BB spacer...

Don't worry....

I'm definitly taking it ;)

[cal]

Don't worry....

I'm definitly taking it ;)

Yes, you have to take it so you can give it to me.

I think my jeep rides too high, and a sagging 3" lift should be just about right.

..Does someone have a plasma cutter I can borrow? :)

[JohnX]

Yes, you have to take it so you can give it to me.

I think my jeep rides too high, and a sagging 3" lift should be just about right.

..Does someone have a plasma cutter I can borrow? :)

You serious on the Plasma?

[cal]

You serious on the Plasma?


hahaha no. I'm not dropping my jeep from 6.5" to a sagged 3" lift (closer to 2).. but it would require a plasma cutter to get the 35's back on after. :)

[cracker]

hahaha no. I'm not dropping my jeep from 6.5" to a sagged 3" lift (closer to 2).. but it would require a plasma cutter to get the 35's back on after. :)

I've got a couple of sawzalls!

[corbinafly]

Perma cool oil cooler.

http://img30.imageshack.us/img30/110/permacooloilcooler8yn.jpg
stock sound bar WITHOUT the speakers.
http://img30.imageshack.us/img30/7003/stocksoundbar8yo.jpg
Come and get it.
Just trying to do my share.:)

Kyung

[cracker]

stock sound bar WITHOUT the speakers.
http://img30.imageshack.us/img30/7003/stocksoundbar8yo.jpg
Come and get it.
Just trying to do my share.:)

Kyung

Kyung,

I'll take the sound bar

Thanks

Avery

[corbinafly]

Kyung,

I'll take the sound bar

Thanks

Avery
Claimed by white bread... Uh I mean cracker.

[Clean Racing]

Ok cleaning up the garage again... these things need a new home...

1. Rear hatch shocks 84~96 I presume.. In good shape
2. Transmission cooler from 95 Ford E350 ( going to Cal )
3. 2" rough country lift blocks-tapered.. a little rusty
4. Drawtite trailer wiring kit- box for car side

I will hang onto this stuff for a week and then its getting round filed... Thanks...


Bump...for free stuff

[Kejtar]

Bump...for free stuff
Didn't you just get a delivery ? :D

[Clean Racing]

Why Yes I did, a pair of white front doors.... Thanks to Johnny...

[johnnyc]

No problem Scott. Thanks for getting them out of my hair (so to speak).

Got something un-Jeep related.

California King size bed w/basic frame. Sealy Posturepedic. Good condition. Comfy. No stains or odors. Free to good home.

[johnnyc]

No problem Scott. Thanks for getting them out of my hair (so to speak).

Got something un-Jeep related.

California King size bed w/basic frame. Sealy Posturepedic. Good condition. Comfy. No stains or odors. Free to good home.

Sorry, I am a flake. I was gonna be moving into a small studio where there wasn't room for my king size bed. But now I'm moving into a larger place which does have plenty of room.

BTW, I'm moving back to Costa Mesa, so I can be close to MJR. :)

[corbinafly]

Sorry, I am a flake. I was gonna be moving into a small studio where there wasn't room for my king size bed. But now I'm moving into a larger place which does have plenty of room.

BTW, I'm moving back to Costa Mesa, so I can be close to MJR. :)
With a garage?

Kyung

[johnnyc]

With a garage?

Yes :D You and Remi convinced me.

[Jeepsterboy101]

Bunch of stock stuff...


Stock front bumper
stock tire cover
stock TC skid
stock fender flares
stock Jeep wheels 15x7 with center caps
stock track bar (no mount)
stock coil springs
stock control arms (all 4)
stock shocks (4)
stock shackles
stock brake lines
stock sway bar links
SkyJackers TC drop (no hardware)


Gonna be throwing this all away next Thursday if no one wants it, so let me know.

[jonboy]

Yes :D You and Remi convinced me.can't have too much garage space
http://i1.tinypic.com/mikol1.jpg

[Kejtar]

Sorry, I am a flake. I was gonna be moving into a small studio where there wasn't room for my king size bed. But now I'm moving into a larger place which does have plenty of room.

BTW, I'm moving back to Costa Mesa, so I can be close to MJR. :)
Garage rocks :D :D

[Kejtar]

Seat out of a 94XJ. Looks like it's a passenger side seat that ended up on the drivers side.

[cal]

Seat out of a 94XJ. Looks like it's a passenger side seat that ended up on the drivers side.

Avery neads it. His passenger seat is broken.

[cracker]

Avery neads it. His passenger seat is broken.

Yeah. I'l take it.

I may be back down there tonight :dunno: to pick up the axle again (hopefully)

[gcurtis]

Yeah. I'l take it.

I may be back down there tonight :dunno: to pick up the axle again (hopefully)

Don't tell my that they are jacking you around also...

[cracker]

Don't tell my that they are jacking you around also...


Well I don't know about Currie yet (I need to make that call this morning) but Scott was having trouble with my gear swap last night. One of the bearings came off and fell onto the floor in little peices. We need a new one for the Dana 44 which he was going to try to pick up today.

[gcurtis]

Well I don't know about Currie yet (I need to make that call this morning) but Scott was having trouble with my gear swap last night. One of the bearings came off and fell onto the floor in little peices. We need a new one for the Dana 44 which he was going to try to pick up today.

Ouch, sorry to hear.

I thought you were speaking of the C's and having on time delivery issues. I still have to take my crap back and have Tony fix the air line but haven't had time with moving, painting, unpacking....

[Mr.OverKill]

ok, the so cal karma has been so good to me i am offering ( within reason )welding and fabbing services, the more you help ( really help as needed not just point and say " is that right ") the more i offer, let me know what you need done and we shal see how things go. ( i like welding, its what i do )


P.S. does any one have a pair of front seats for the back of my XJ?

[Captain Ron]

Come get this stuff.

http://64.226.116.160/ron/post/k1.jpg

http://64.226.116.160/ron/post/k2.jpg

89 MJ, D35, D30, stuff, more stuff.

Haul it off this week, or....

...
For those of you who go to junk yards (Captain http://www.timbercrawler.com/bb/images/smiles/5booya.gif)
....

Yep, you'll have to go to the junkyard to get it. :D

--ron

[RWKHausSupply]

Come get this stuff.

http://64.226.116.160/ron/post/k1.jpg

http://64.226.116.160/ron/post/k2.jpg

89 MJ, D35, D30, stuff, more stuff.

Haul it off this week, or....



Yep, you'll have to go to the junkyard to get it. :D

--ron

I will take the D30 if its a HP and non - disco?

[Captain Ron]

I will take the D30 if its a HP and non - disco?

'89... Disco axle.

--ron

[AlonFW]

I have the following 'junk' to unload from an 86:

Glass from the back doors
2.8 V6 w. ATX 3spd Auto Tranny and 207AM Tcase, front driveshaft, linkage, and assorted misc parts.

Alon :)

[RWKHausSupply]

I have the following 'junk' to unload from an 86:

Glass from the back doors
2.8 V6 w. ATX 3spd Auto Tranny and 207AM Tcase, front driveshaft, linkage, and assorted misc parts.

Alon :)

Can I ask you to measure the front drive shaft while compressed and give me the center of one end u-joint to the other end joint? If its over 31ish" I could use the drive shaft..

Thanks

[Kejtar]

Gotta bring it back up to the top:

A garden table with a glass top and a set of 4 chairs. Color? flaking white showing aluminum ;)

Take it off my hands please.

[corbinafly]

I've got one too.


Kinda saggy set of rancho leafs. They have rear bushings but I took the ones out of the front. They're supposed to be 2 1/2" lift, but after a couple years of carrying a lot of weight in the back they're more like 1.5"-2" with no weight in the back.

Kyung

[jonboy]

tie rod and drag link assembly

d30 knuckles

rear bumper, grey

[ScottyDog]

Free to Good Home....

4 stock XJ wheels with 30 x 9.50 BFG A/Ts. 2 with about 40% tread 2 with about 20% tread.

Also, 4 stock XJ 15x7" Mesh style wheels. (BLACK)

4 stock ZJ 15x7" (angled 5 star?) wheels with 235/75/15s

Front XJ Skid Plate.

Scott Suyeto

[xj_mike]

Rising Sun/Scott - I would be interested in the front skid plate. PM me with an email contact and we can arange stuff offline. Thanks!

[SBrad001]

Mountain bike forks! one 2001 Rock Shox SID air spring fork and one Manitou SLX Carbon coil spring fork. Both have rather short steer tubes though. Great for amking a nice cheap bike for the wife, gf, or short person.

[djblade311]

Free
2 - Stock Rear leaf springs from a 99 xj.
2 - Stock rear shackles

[johnnyc]

Both side view mirrors from my 96. Good shape.

Rabbit??

[Kejtar]

Both side view mirrors from my 96. Good shape.

Rabbit??
If Rabbit doesn't take them, I think I will: adjustors in my dad's rig don't work.

[johnnyc]

I could bring them by later today. Going to Curt's anyway. But for now, I sit here waiting for my new sofa to be delivered. They said between 11 am-3 pm. Right in the middle of the day. :mad: Bastids!

[Kejtar]

I could bring them by later today. Going to Curt's anyway. But for now, I sit here waiting for my new sofa to be delivered. They said between 11 am-3 pm. Right in the middle of the day. :mad: Bastids!
If you gonna be in the neighbourhood swing by. I'm working on my junk so I'll be around.

[jonboy]

2 d30 covers and bolts

[RWKHausSupply]

free for the taking...

two front stock track bars. One with stock bracket attached

front swaybar with urethene bushings and endlinks with urethene.

stock rear springs

stock 1990 master and booster, removed working but who knows for how much longer.

stock hieght bilstien front shocks in great working condition

all removed and ready to be taken

[Skullver]

free for the taking...

two front stock track bars. One with stock bracket attached

front swaybar with urethene bushings and endlinks with urethene.

stock rear springs

stock 1990 master and booster, removed working but who knows for how much longer.

stock hieght bilstien front shocks in great working condition

all removed and ready to be taken
If someone doesn't need the trackbars/swaybars for what they are, I may take them off your hands next time I am in the area, I need as much scrap metal as possible to practice welding

[Clean Racing]

free for the taking...

stock hieght bilstien front shocks in great working condition

all removed and ready to be taken


I will take the stock bilstiens off your hands....

Scott.

[RWKHausSupply]

I will take the stock bilstiens off your hands....

Scott.

Gladly give em to ya. I will even deliver them to ya! Remember I am the master flake when it comes to getting you your stock ECU back to you and this way I have even more reason to bring em to ya.

Would sat or sun be good?

[Mr.OverKill]

free for the taking...

One with stock bracket attached


if you make it to sandiego, i would like the bracket for the base template so i dont take my rig out of commission while i build the modified bracket. that is if some one local doesnt have one i could snag first

[Clean Racing]

Gladly give em to ya. I will even deliver them to ya! Remember I am the master flake when it comes to getting you your stock ECU back to you and this way I have even more reason to bring em to ya.

Would sat or sun be good?

Yeah either of those days would work... I will be around.. thanks..

Scott.

[Skullver]

free for the taking in Ventura CA, 93001:
Complete straight brown/tan rear hatch with glass from a 85 pioneer, drivers door from a white 1992 country, stock spring pack from a 2000 xj w/50k, stock coils, I have so much more stuff to get rid of so let me know if you have any requests. I can take pics of anything if ya'all wish.
Chris

[99xjache]

Chris,
Do you still want to get rid of that exo in the corner?

Aaron

[Skullver]

Chris,
Do you still want to get rid of that exo in the corner?

Aaronare you talking about the pre-bent tubing? it was designed as an internal cage, I havn't really looked at it in a while but I can take a look and see what i still have if you want.
Chris

[SBrad001]

By next week end, I'll have stock coil & leaf spring, two stock bumpers for a '96 and older XJ. Anyone want? Give me a PM.


~Brady

[corbinafly]

Anyone want the stock 27 spline 8.25 that I took out of my 95? 3.55 gears and drum to drum. :confused1 Yippy!

Kyung

[Eddie G.]

A pair of 31" Kelly A/T tires with about 40% thread left. Mounted on 15" alloy Jeep rims. Both are out of round. Make good spares. They are in my garage in Los Angeles.

[TheWarWagon]

So is this the thread where everyone asks for stuff, or offers up their things?

[Kejtar]

So is this the thread where everyone asks for stuff, or offers up their things?
Offers and takes. This is kind of how it works

To claim this you must offer something up to the group as well. You can decide if you are willing to ship it or require pickup. I'm sure I'll think of a few more rules as this game goes on, lets see if this catches on.

[Jeepdogrob]

I have seen a ton of stock bumpers for free lately but I will take a chance and see if anyone needs a front , rear, or both. They are off a 96 and are in pretty good shape. Stock black color in good condition. They also still have the end caps. Pick up only, shipping is a PITA.



Rob

[TheWarWagon]

Well, seeing as how I'm 23 and on a limited budget; everything I'm looking for will probably have to be used. I don't have much to part ways with, but I'm more than willing to throw a wrench party. The one thing I'm looking for right now, is someone to swap out my cracked exhaust manifold. I bought a replacement from Scottys, but it's spendo buckos to have any local shop put it in. Somebody let me know if I'm being greedy.

[5150xj]

Well, seeing as how I'm 23 and on a limited budget; everything I'm looking for will probably have to be used. I don't have much to part ways with, but I'm more than willing to throw a wrench party. The one thing I'm looking for right now, is someone to swap out my cracked exhaust manifold. I bought a replacement from Scottys, but it's spendo buckos to have any local shop put it in. Somebody let me know if I'm being greedy.

Do you have a place to do the wrenching? Like a garage, dirve way... where your allowed to work on your vehicle.


Tim D.

[TheWarWagon]

Do you have a place to do the wrenching? Like a garage, dirve way... where your allowed to work on your vehicle.


Tim D.

Well, honestly, all I have is half a driveway. I rent a room, and the lady that owns the place does karaoke(sp?) and has an old cadillac just rotting in the garage. But, I do have plenty of backyard space to cook, and party.

[Eddie G.]

Wrong thread. This one is for giving parts, not lift parties.

[Kejtar]

Wrong thread. This one is for giving parts, not lift parties.
Yup, this is the Karma Thread of parts:


To claim this you must offer something up to the group as well. You can decide if you are willing to ship it or require pickup. I'm sure I'll think of a few more rules as this game goes on, lets see if this catches on.


Lift parties, repair parties, part requests should go in a separate thread in order to preserve good Karma :D

[TheWarWagon]

Well, who rides a dirtbike and wants their suspension redone? You see, that's what I do for a living. So would that count?

[Eddie G.]

No. We have been trying to tell you this thread is "Karma Thread of PARTS", not services or parties. There are lots of fabricators and builders on this forum. If you see "parts" offered here that you need which will help you with your XJ buildup, just take them in good will and throw something in the pile later when you have stuff laying around. If you want help with lifting the XJ, or to want to talk about lift parties, etc., start your own new thread about them. If you want to offer services, then there is "classifieds" section. This is already gone way off topic and is annoying to come back to the thread to find out it's about lift parties.

[TheWarWagon]

Well, I didn't just want to come on here pleading for parts, but if that's what it's all about; anybody have a rear bumper for an '89? Stock or not?

[Kejtar]

Well, I didn't just want to come on here pleading for parts, but if that's what it's all about; anybody have a rear bumper for an '89? Stock or not?
There is nothing wrong with asking for parts, except that should be done in a separate thread. Also IIRC if you look into for sale, someone was giving away free bumpers.

[Eddie G.]

Heck, easier than that -- scroll up to reply #107 and READ! They fit 89.

[TheWarWagon]

Heck, easier than that -- scroll up to reply #107 and READ! They fit 89.

I wasn't sure if the fitment was the same, but thanks Eddie.

[Eddie G.]

:cheers:
Most 87-96 (and some pre-87) interior/exterior parts are interchangeable. Some 87-01 interior/exterior parts may be interchangeable too (example manual seats - I like my newer 99 seats - suspension, etc.). Engine, brake and drivetrain parts are a bit more complex.

[djblade311]

still available for the taking:

2 - stock rear leaf springs
Stock Rear DS


Both from a 99 with a 8.25

[xjkevin]

i got 2'' spacersfor the front, come and get them, also have some 4'' blocks for the rear was gonna toss them but someone may need for a full size truck or ???let me know //Kevin

[ryurabbit]

mememememememe!!! I live nearby and can pick them up saturday, also like to get to know a fellow Yucaipian. I would very much like the coil spacers.
Thanx!

[xjkevin]

there yours!

[Jeepsterboy101]

Front bumper of my 99. Desert Sand is the color.

All four flares, also Desert Sand.

Stock XJ intake

OEM wheels 15x7's. All 4 with center caps.

stock front swaybar

front end caps from a 99 XJ. They are a dark green.

Stock tire cover.

RE 2 inch bumpstops

Have all my stock suspension except leafs.


Don't really want to ship anything but we'll see. I have pictures of everything for the most part so just let me know.

[rpraterxj]

I have a stock trac bar off of a 2000, only 48K miles, great condition.

I have knuckles and axles shafts out of a 1987 D30. Stock size u-joints.

Great trail spares.

Located in Lake Forest.

[Kejtar]

I have a stock trac bar off of a 2000, only 48K miles, great condition.

I have knuckles and axles shafts out of a 1987 D30. Stock size u-joints.

Great trail spares.

Located in Lake Forest.
I'll take the trackbar for my dad's jeep :D

[rpraterxj]

I'll take the trackbar for my dad's jeep :D

It's yours!

[Eddie G.]

RE 2 inch bumpstops


Don't really want to ship anything but we'll see. I have pictures of everything for the most part so just let me know.

If you still have the RE bumpstops, I'll take them. I think Cal will be down around there on the weekend of 23rd. I'll ask if he can grab them. Thanx. :)

[Jeepsterboy101]

If you still have the RE bumpstops, I'll take them. I think Cal will be down around there on the weekend of 23rd. I'll ask if he can grab them. Thanx. :)

Yours. Just let me know.

[jonboy]

4 Rancho 9000's
One of the rears has a small dent, but it does not affect function. Also, missing the rear bar pins.

These were a good length for 4.5" - 5" lift with OEM mounts.

..........................------------- length --------------
.......................compressed.....extended.... travel
Front = 9168 .. 15.500 ........... 25.125 ..... 9.625
Rear = 9124 .. 15.000 ............ 23.750 ..... 8.750

[Kejtar]

4 Rancho 9000's
One of the rears has a small dent, but it does not affect function. Also, missing the rear bar pins.

These were a good length for 4.5" - 5" lift with OEM mounts.

..........................------------- length --------------
.......................compressed.....extended.... travel
Front = 9168 .. 15.500 ........... 25.125 ..... 9.625
Rear = 9124 .. 15.000 ............ 23.750 ..... 8.750
I think the front is the perfect height for me and the rear sounds about right too and my current shocks are well broken in ;) . I'll take 'em. You want them gone now or next M&G?

[jonboy]

I You want them gone now or next M&G?
either way, as long as they're gone sometime soon

[cracker]

Ummmmmm...........................


A while ago, someone posted that they had a Full Size Pickup Truck Tool Box they were giving up.

Anyone know who that was or if they still have one? Or does anyone else getting rid of one?

-Avery

[Eddie G.]

Yours. Just let me know.

Thanx Jeepsterboy101. Due to recent changes in my design (thanx to Cal) I am gonna extract my request and let somebody else have the bumpstops.

[silverslk]

I am interested in the stops if they are still available. I just have to figure out who I know near Ramona......I live in Anaheim and work in Oceanside.

[Eddie G.]

I am interested in the stops if they are still available. I just have to figure out who I know near Ramona......I live in Anaheim and work in Oceanside.

It is just past the Wild Animal Park. Take the family for a road trip!! :)

[xjkevin]

do you still have axles if so id take them, thanks Kevin




quote=rpraterxj]I have a stock trac bar off of a 2000, only 48K miles, great condition.

I have knuckles and axles shafts out of a 1987 D30. Stock size u-joints.

Great trail spares.

L
ocated in Lake Forest.[/quote]

[rpraterxj]

do you still have axles if so id take them, thanks Kevin

Hi Kevin,

I sure do. They're yours. How and when do you want to come and get them? I will be going to Big Bear on May 5th and I can bring them with me.

Let me know.

Robert

[Jeepsterboy101]

I am interested in the stops if they are still available. I just have to figure out who I know near Ramona......I live in Anaheim and work in Oceanside.

I am in working in Del Mar so if you want to meet up around there let me know.

[silverslk]

Lets see if our schedules match, What hours are you working in Del Mar?



Thanks
Andy

[tripdog]

I have a D35 and a LP D30, stock leafts, stock coils, drive shaft and some other miscellaneous stuff if anyone wants it.

[jonboy]

I have a D35 and a LP D30, stock leafts, stock coils, drive shaft and some other miscellaneous stuff if anyone wants it.
I could use a stock tranny cross member if you have one

[Eddie G.]

I have a D35 and a LP D30, stock leafts, stock coils, drive shaft and some other miscellaneous stuff if anyone wants it.

I like to get the axle shafts out of that LP D30 if possible. :)

Thanx...Eddie

[LiquidOps]

ok.... here's what I got....

I've got:
The head from my 91 4.0 - Blew a head gasket so i just replaced the head while I was at it... small chance head could be cracked, but what do ya want for karma? haha

I believe I have 2 T-Cases... one is a 242 from my 91. Probably needs to be rebuilt not sure... housing is cracked... so atleast inspect it ;)

I have another 242 that, from what I was told, is in good shape. I forget the spline counts on these, but this one was the wrong one for my 91.

I might have some other stuff... not really sure... just know I need to get rid of this stuff.

so yeah... :)

let me know

[cracker]

I have a D35 and a LP D30, stock leafts, stock coils, drive shaft and some other miscellaneous stuff if anyone wants it.

Ummm. I call the drive shaft!!!! Eddie, can you grab it for me when you get the axle shafts.

[tripdog]

I like to get the axle shafts out of that LP D30 if possible. :)

Thanx...Eddie


Oh I forgot to mention that the shafts from the 30 are being used by me. And neither of the axles have brakes....

Sorry bout that!

[tripdog]

Ummm. I call the drive shaft!!!! Eddie, can you grab it for me when you get the axle shafts.


I'll give the drive shaft to Cal...he can pass it on to you.

[cracker]

I'll give the drive shaft to Cal...

Thank you very much :wave:.


Remember, happy Cal's come from California :D

[tripdog]

I could use a stock tranny cross member if you have one

I don't remember pulling that off, let me check.:)

[99xjache]

I could use a stock tranny cross member if you have one

I still have one from my 99/aw4. You can have if you want.

[jonboy]

I still have one from my 99/aw4. You can have if you want.
Aaron, can you bring it to big bear?

[rpraterxj]

FREEEEEE - LP D30 axle - No shafts or knuckles, BUT it does have the 3'55 gears and carrier in it, and a good diff cover.

Located in Lake Forest.

Come and get it!

[99xjache]

Aaron, can you bring it to big bear?

Its on the truck. I'll have it with me. spot 88 or 89 I dont remember. Make sure you bring tools to install it.:)

Aaron

[cyberbackpacker]

Hopefully next week after 5 months of driving at 35mph, and two months after getting replacement axles, I will/should be swapping axles.

So I will have a HP disco D30 with at least the psgr side tube bent (possibly more) and a d35- non c-clip I believe. Both have factory 3.07s

I live with my in-laws and I am not going to be allowed to bring axles home after I swap in the new axles.

So this is a heads up... otherwise unfortunately they will be finding a dumpster after the swap.

If you want them, pm me to arrange pick-up.

-Kevin
cyberbackpacker

[Kejtar]

Hopefully next week after 5 months of driving at 35mph, and two months after getting replacement axles, I will/should be swapping axles.

So I will have a HP disco D30 with at least the psgr side tube bent (possibly more) and a d35- non c-clip I believe. Both have factory 3.07s

I live with my in-laws and I am not going to be allowed to bring axles home after I swap in the new axles.

So this is a heads up... otherwise unfortunately they will be finding a dumpster after the swap.

If you want them, pm me to arrange pick-up.

-Kevin
cyberbackpacker
If the d35 is non cclip I'm interested in just the shafts (if you're willing to separate).

[cyberbackpacker]

If we have the wherewithall at the end of the day to pull them, I can definitely do that... I can keep shafts in the back of the rig, but an entire housing would be ridiculous.

-Kevin
cyberbackpacker

[Kejtar]

If we have the wherewithall at the end of the day to pull them, I can definitely do that... I can keep shafts in the back of the rig, but an entire housing would be ridiculous.

-Kevin
cyberbackpacker
Cool, I'd appreciate it if you get a chance as my dad's rig could use a set of spares. If it's going to be too much trouble though don't worry about it.

Thanks
Remi

[cyberbackpacker]

No worries... I'm glad to hook you up if I can.

-Kevin
cyberbackpacker

[Mr.OverKill]

BTT and i need a good but stock track bar, the newer the better. thanks

[corbinafly]

BTT and i need a good but stock track bar, the newer the better. thanks
You can have mine if you want it. It came off of my 95 and was good when I pulled it.

Kyung

[itsHud]

BTT and i need a good but stock track bar, the newer the better. thanks
Troy,
I've got mine, its off the '98. You know where I live...

Ken

[jonboy]

rear driveshaft off a 91 with 4.0, AW4 and 242
2 - d30 covers
d44 cover
rear bumper
front bumper

[silverslk]

rear driveshaft off a 91 with 4.0, AW4 and 242
2 - d30 covers
d44 cover
rear bumper
front bumper


Is the front bumper black? Will it fit my 93? If so, where are you located?

[cyberbackpacker]

Kejtar, got the rear replaced last week but the old one was a c-clip. Sorry about that.

[Kejtar]

Kejtar, got the rear replaced last week but the old one was a c-clip. Sorry about that.
Oh well....

[jonboy]

Is the front bumper black? Will it fit my 93? If so, where are you located?
bumpers are the grey laredo trim color, off a 1991. I'm in Tustin, but will deliver to the M&G at Grant's place.

the front one comes off the rig this weekend

[djblade311]

bumpers are the grey laredo trim color, off a 1991. I'm in Tustin, but will deliver to the M&G at Grant's place.

the front one comes off the rig this weekend

damn I thought that you had some HD bumpers available...

[silverslk]

bumpers are the grey laredo trim color, off a 1991. I'm in Tustin, but will deliver to the M&G at Grant's place.

the front one comes off the rig this weekend

I guess I can spray them black. Anything is better than my "tweaked" front bumper.

[rpraterxj]

bumpers are the grey laredo trim color, off a 1991. I'm in Tustin, but will deliver to the M&G at Grant's place.

the front one comes off the rig this weekend

Hey JonBoy,

Is that front bumper still available? I was thinking Ashley (Jordan's daughter) could use it since she crashed hers.

It was good to see you. Let me know how the bumper install goes. Sorry I can't help you with it.

[jonboy]

Last nite, I told Ashley and Jordan that she could have the front bumper :sunshine:
I might be able to drop it at Grant's this weekend.

[JohnX]

4 35" BFG mt's 315/75/16

20-30% tread. All hold air, few chunks here and there, but still street worthy. Definetely Spare worthy.

Had them listed for sale...but I just want them out of my way and can't stand to throw away good rubber.

[saki669]

4 35" BFG mt's 315/75/16

20-30% tread. All hold air, few chunks here and there, but still street worthy. Definetely Spare worthy.

Had them listed for sale...but I just want them out of my way and can't stand to throw away good rubber.

Hmm.. I need a 35" spare, but for a 15" rim.
I'm suprised you have no takers. The metrics are usually a little more $$

We meeting up at TDS?

[JohnX]

Hmm.. I need a 35" spare, but for a 15" rim.
I'm suprised you have no takers. The metrics are usually a little more $$

We meeting up at TDS?
If all you need is one spare, I do have one 16x10 wheel you can have.

TDS...not likely.

I am in the middle of a front axle overhaul... truss, new locker, gears, bearings, ball joints, etc.

[Blazair]

Hmm.. I need a 35" spare, but for a 15" rim.

I got your spare Kirk.
I just need to get down to the hood.

[Hildy]

4 35" BFG mt's 315/75/16

Any chance these would fit on a stock Chevy 6-lug rim? (The current tires are 285/75R16s, I believe, 2004 K1500 Suburban.)

--Hildy

[JohnX]

Those rims are 16x7. I have mounted this size tire on 16x8's and they look perfect. 16x7 will probably be okay, but not ideal.

[cal]

Those would be too tall for your suburban hildy. They are the exact same size tire I run on my cherokee.

If you hold on to them for a couple weeks john, I wouldnt mind them to throw on my trailer.. but I'm in the process of a move and dont have space until after I get the new pad.

[Hildy]

What means you by "too tall"? I know they'd fit in the wheelwell just fine... isn't that what self-clearancing is all about? ;-)

Tell you what, Cal, you grab them, I'll store them in my side yard 'til you're ready for them, and that way we can hold them up next to the 'burb and see.

Hildy

[cal]

Aight.

John, PM me some contact info and I'll swing up your way to grab them when I take vintagespeed his exhaust. Sometime this week, not sure when. I need to unload my jeep (its full of camping gear atm).

-C

[homebrew]

First off I am glad to see the thread again.

What I got. I have a pace setter header complete with o2 sensor. It needs to be cleaned up has baked on mud, started to clean it up but decided that I will just buy a new one.

I am in the military deployed right now I will be back sometime in april. If interested let me know

[hollywood32]

I can always use more Karma,
Just started my first trail rig project so I will have lots of interior or common oem replcment parts for 93 country, so far I have seats front and rear although they have been sitting out in the rain so maybe not so good, Uhaul bolt up reciever, carpet was crap, I destroyed the center console getting that out rear bumper is in good shape and should come off in a month or so, springs are worn out but avialable whith shocks and stock rims are also available but one has big deep scratch in it tires are junk but would work for roller chassis. Once I rip out more I will post.

[hollywood32]

I've just about finished my lift. So more parts are available from my junk pile if any one needs them. Lower links, track bar, brake lines, etc...