• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Is cross-camber measurement good enough??

jtszymano

NAXJA Forum User
Location
Aliso Viejo, CA
I was just wondering since my left front camber is always off (-1.1) BUT the total 'cross-camber' numbers always turn out within the normal limits...

It seems like the best thing would be to correct the one-side but Im not sure if that is possible.
Should I be concerned? What is more important? The shop neversays anything...go figure.
JS
 
camber is not adjustable unless you get adjustable ball joints. So if you dont want to get adjustable ball joints then you just have to live with it. My camber is almost 1 degree on each side. I just leave it. It is not wearing the tires incorrectly either.
HTH.
 
Back
Top