rockwerks
NAXJA Forum User
- Location
- Chito Beach Resort, WA
need upper axle side control arm brackets for a 60 Im building this week, where can I get the passenger side stand off assembly at?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Where to find upper control arm axle side brackets
- Thread starter rockwerks
- Start date
XgeekstarX
NAXJA Forum User
- Location
- winter springs, florida
RE makes a bracket kit that might work.
http://www.rubiconexpress.com/dynamic/mainpage.asp?folderid=218
http://www.rubiconexpress.com/dynamic/mainpage.asp?folderid=218
rockwerks
NAXJA Forum User
- Location
- Chito Beach Resort, WA
XgeekstarX said:
UMMM dont need a whole darn kit just 2 of the axle mounts for upper control arms
- Location
- Maurertown,Va.
Try Currie. They have HD front axle control arm brackets.
Wayne
Wayne
- Location
- Port Orchard, WA
from FullSizeXJ a quote that i got when planing my swap:
RE9988 $70.50
that is a member of
price on just the RE Axle bridge...
RE9988 $70.50
that is a member of
price on just the RE Axle bridge...
rockwerks
NAXJA Forum User
- Location
- Chito Beach Resort, WA
XJ_ranger said:from FullSizeXJ a quote that i got when planing my swap:
RE9988 $70.50
that is a member of
dont need the truss, just 2 of the passenger side mounts, the 60 is flat on top with a 1/4" bolt on plate dont need a truss, just 2 of the passengers side mounts
basalt51
NAXJA Member #761
- Location
- Woodland, CA
I suggest contacting Fullsize or RE or any other RE dealer and telling them what you want. RE sells all their components individually. What you are looking for is one of these numbers (RE9968 through RE9993), they will know which exactly.
- Location
- Port Orchard, WA
xjnation said:
make them?
JKS bushing sleve - 12.00 a piece
and some 2"x3"x3/16" box tube.
Mine are 3" channel with 1/4" flatstock welded in. I flame cut the holes and cleaned up with the die grinder then tack welded in the bushing sleve... i only did that because the flatstock and channel was free - and i didnt have extra cash to buy more metal.
kinda like this - that piece wasnt used...
http://www.opiebennett.com/images/Jeep/Front-axle-swap/week 3-4/images/IMG_3901.jpg
http://www.opiebennett.com/images/Jeep/Front-axle-swap/week 3-4/images/IMG_3900.jpg
rockwerks
NAXJA Forum User
- Location
- Chito Beach Resort, WA
XJ_ranger said:
I guess you are right Im gonna have to make em
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Make them,heres a JKS sleeve fit to a stock bracket.
rockwerks
NAXJA Forum User
- Location
- Chito Beach Resort, WA
Well with the 60 I have to be taller than stock by 1 1/4", so I will cut the top off the stock one and slip it into another 2x3x1/4 wall tube and then match height to minium height on the drivers side pumpkin, I will use a cut one there also.. Thanks for letting me think outloud :wave:
Fullsizexj
NAXJA Forum User
- Location
- Milton WV
the RE part number for the passenger side upper control arm mount is RE9986
