Dana 44 spare axle shafts, What can I get them from?

afd516 · Sep 19, 2005

I just installed a 1982 waggy dana 44 in my xj. I need some spare axle shafts.

I plan on hitting the yards and ebay to look for some today.

:helpme: My ? is what other years of waggy's would be the same as an 82 waggy 44 or what other models might have the same 44. This is a driver side drop but, I am sure that you guys would know this.

BrettM · Sep 19, 2005

ALL driver's drop are the same, except the short side inner on the disconnect version.

the stub shafts are interchangeable with Chevy D44 and 10bolt stubs.

bj-666 · Sep 20, 2005

1974-1979 WAGONEER (Length 33.19 in.; 30 Spline; 297X/760X U-joint; Left 39339 1974-1979 WAGONEER (Length 14.69 in.; 30 Spline; 297X/760X U-joint; Right 38808 1980-1984 WAGONEER (Length 32.12 in.; 30 Spline; 297X/760X U-joint; Left 39461 1980-1984 WAGONEER (Length 15.8 in.; 30 Spline; 297X/760X U-joint; Right

1974-1983 WAGONEER (Disk Brake) (Length 9.94 in.; 19 Spline; 297X/760X U-Joint 38815 1974-1976 WAGONEER (Drum Brake) (Length 9.72 in.; 19 Spline; 297X/760X U-Joint 38816 39459

haha i coppied that from warn and it came in with all smilies

BrettM · Sep 20, 2005

bj-666 said:
1980-1984 WAGONEER (Length 32.12 in.; 30 Spline; 297X/760X U-joint; Left 39461 1980-1984 WAGONEER (Length 15.8 in.; 30 Spline; 297X/760X U-joint; Right

1974-1983 WAGONEER (Disk Brake) (Length 9.94 in.; 19 Spline; 297X/760X U-Joint 38815
haha i coppied that from warn and it came in with all smilies

there, I took out all the 70s info you don't need. the long side is 32.12in, the short side is 15.8" and the stub shafts are 9.94". All measured from the end of the splines to the middle of the u-joint.

also, disregard Warn cutting the date off at 1984, the driver's drop Waggys continued until I think '91, and the shafts remain the same.

Like I said; ALL driver's drop are the same, except the short side inner on the disconnect version.

afd516 · Sep 20, 2005

:thumbup: Awsome, guys. I found two axles at one junk yard. I just need to talk them into seperating one of the axles so I can get the axle shafts.

I think that one of them is a 1985 and the other is a 1987. Both non-disconnect driver side drop.

Thanks again. :cheers:

BrettM · Sep 20, 2005

if you find any extras in your searching, I need some so I can go wheel Johnson Valley! PM me

afd516 · Sep 20, 2005

Where is Johnson Valley? :dunno:

And not to be a kiss ass but if I come up with some I will definately let you know. As much as you help us out!! Your request is not to much to ask for IMO.

:thumbup: You got it.

BrettM · Sep 20, 2005

afd516 said:
Where is Johnson Valley? :dunno:

And not to be a kiss ass but if I come up with some I will definately let you know. As much as you help us out!! Your request is not to much to ask for IMO.

:thumbup: You got it.

Johnson Valley is in southern California and the home of the Hammers trails. I anticipate breakage.

Paul S

Dana 44 spare axle shafts, What can I get them from?

afd516

NAXJA Forum User

BrettM

NAXJA Forum User

bj-666

NAXJA Forum User

BrettM

NAXJA Forum User

afd516

NAXJA Forum User

BrettM

NAXJA Forum User

afd516

NAXJA Forum User

BrettM

NAXJA Forum User

Similar threads