-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Transfer case question
- Thread starter falcon556
- Start date
langer1
NAXJA Forum User
- Location
- Mineral City,Ohio
One year.falcon556 said:
jackieonasses
NAXJA Forum User
- Location
- Tulsa Ok
hahahaha!!!!langer1 said:
langer1 said:
That can be a joke or an accurate description.
A 96 and a 97, depending on the source can be either identical or incompatible.
I need to know whether I am limited to a TC from a 96XJ only, or I could bolt on
a TC from a 96-01XJ and 95-98ZJ.
I own a 96XJ.
Yucca-Man
NAXJA Member # 683
- Location
- Castle Rock, CO
The NP231 t-case changed for the 1996 MY, going to the later model with the longer unsupported output. As long as your driveshaft looks similar to this one you should be able to use the later case.
Of course, you could install an SYE and not worry about it
Of course, you could install an SYE and not worry about it
Yucca-Man said:The NP231 t-case changed for the 1996 MY, going to the later model with the longer unsupported output. As long as your driveshaft looks similar to this one you should be able to use the later case.
Of course, you could install an SYE and not worry about it
Thanks Jim, I believe you are right, everything I see fits.
My problem has been that for some reason salvage books and even car-part.com
treat 96 as a special year and that made me suspect that there may be something different between 96 and 97+.
Unless I hear otherwise I will assume that they are the same cases.
