another D44 front question

trailbuilt · Sep 14, 2005

here's the build up. d44hp re tubed for late model waggy shafts.
Re bracket kit.

the messurement for the coil buckets center to center is 37 inches.
I would like to go widerto help keep my spring off my track bar mount.With out modin the driver coil bucket its sitting at 37.75. Am I ok with that??
Anyone mod the brackets to get 37 got pics?

XJ_ranger · Sep 14, 2005

my measurement was nowhere near 37 inches from axle tube center to coil spring center...

mine was closer to 18 or 19 inches if memory serves...

JnJ · Sep 14, 2005

XJ_ranger said:
my measurement was nowhere near 37 inches from axle tube center to coil spring center...

mine was closer to 18 or 19 inches if memory serves...

I believe he measured from center of spring bucket to center of spring bucket.

trailbuilt · Sep 15, 2005

Ok here are my messurements..... Claytons cad drawig calls for 37 coil buckete center to center. I have 37.75.

Lower control arm mounts call for 29.77 I have 30.50.

Now these mesurements are the best I can get with out motifing the RE brackets.

Will this fly??

tealcherokee · Sep 15, 2005

im in the process of doing my j10 44

my spring buckets are 38, lca's are 30.5 also

CRASH · Sep 15, 2005

trailbuilt said:
Ok here are my messurements..... Claytons cad drawig calls for 37 coil buckete center to center. I have 37.75.

Lower control arm mounts call for 29.77 I have 30.50.

Now these mesurements are the best I can get with out motifing the RE brackets.

Will this fly??

Yes, that's fine.

another D44 front question

trailbuilt

NAXJA Forum User

XJ_ranger

NAXJA Member

JnJ

NAXJA Forum User

trailbuilt

NAXJA Forum User

tealcherokee

NAXJA Forum User

CRASH

NAXJA Forum User

Similar threads