Quick Disconnects hitting coil springs?

Double Down · Aug 25, 2005

I have about 6" of lift and am pretty darn sure I have the axle centered where it's supposed to be and with drop brackets, have the control arms set to the righ length, but for some reason the quick discos are hitting the coil springs. Is this normal? Do I need to do anything?

Thanks,

Chris

xjoe · Aug 25, 2005

R.E has sway bar drop brackets, that move the sway bar farther away from the coils.

ks92xj · Aug 25, 2005

you need longer discos or a sway bar drop bracket to put things back in alignment

MontanaXJ · Aug 25, 2005

Double Down said:
I have about 6" of lift and am pretty darn sure I have the axle centered where it's supposed to be and with drop brackets, have the control arms set to the righ length, but for some reason the quick discos are hitting the coil springs. Is this normal? Do I need to do anything?

Thanks,

Chris

Mine did the same thing. Try relocating the sway-bar frame mount further forward. You can get mounts from Rubicon Express, and probably others, but you could just make them out of some channel.

Greg M.

Double Down · Aug 25, 2005

Thanks all, that's all I needed to know

Chris

Quick Disconnects hitting coil springs?

Double Down

NAXJA Forum User

xjoe

NAXJA Forum User

ks92xj

NAXJA Forum User

MontanaXJ

NAXJA Forum User

Double Down

NAXJA Forum User

Similar threads