• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Number of splines in an 89 Bronco 9"?

89 Broncos had 8.8" rears.
Last year for the 9" inthe Bronco and f150 was '86.

A 78-86 Bronco will have 31 spline shafts and be 65" wms/wms.
The pinion is also offset about 3" to the passenger side, but has equal length shafts... Only need one spare.

kris.
 
89sj said:
89 Broncos had 8.8" rears.
Last year for the 9" inthe Bronco and f150 was '86.

A 78-86 Bronco will have 31 spline shafts and be 65" wms/wms.
The pinion is also offset about 3" to the passenger side, but has equal length shafts... Only need one spare.

kris.

dont be afriad of that offset though... with the 35" rear driveshaft that i run, its fine...
 
rock rash said:

there are also no 3.55 gears for a Ford 9"

there are 3.50's that would work, but no 3.55's...
 
Back
Top