BUCKET
NAXJA Forum User
- Location
- california
pulled a dana 44 out of an 87 xj and it has the factory trac loc, but has only 3.54 gears. Will the trac loc accept 4.10 or will i have to go with a different carrier.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
trac loc question
- Thread starter BUCKET
- Start date
afd516
NAXJA Forum User
- Location
- Fort Worth, Tx
There are others on here that can reconfirm or tell you differently but I believe the case break is 3.92.
So, yes you will have to change the carrier.
So, yes you will have to change the carrier.
BRPL XJ
NAXJA Forum User
- Location
- Alpharetta GA
the TL is a 3.73 and down carrier, in order to run 4.10's etc you'll have to get "thick" gears. the thick gears are adapted to run with the low carrier, most gear companies make them
Michael McAtee
NAXJA Forum User
- Location
- Redding, CA
I also have a d44 w/ Trac lock and want to run 4.88. Do I need a new carrier?
