• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

vibration/binding noise

j kyle

NAXJA Forum User
Location
kirkland, wa
i have a 2000 cherokee. it has about 10 inches of lift. the basic kit is the 5.5 rubicon extreme duty sa kit. i just put the long arm upgrade kit on, wich moves the trans and transfer case up one for inch. no i get a binding sounf or vibration from the rear end, it has sye kit and rear cv driveshaft
 
Even with a c.v. jointed 'shaft, you sometimes have to DROP the t-case, and roll the axle pinion anyway. That is what I think your problem is.
 
10" of lift from an RE 5.5"???
 
j kyle said:
i have a 2000 cherokee. it has about 10 inches of lift. the basic kit is the 5.5 rubicon extreme duty sa kit. i just put the long arm upgrade kit on, wich moves the trans and transfer case up one for inch. no i get a binding sounf or vibration from the rear end, it has sye kit and rear cv driveshaft

Just a friendly word of advice.

Double-posting is a violation of the forum rules. You should delete one of them.

http://www.naxja.org/forum/showthread.php?t=60940
 
Back
Top