My Jeep will not start

S

scott88wagoneer

NAXJA Forum User

Location

Cisne Illinois

• Jun 10, 2005

• #1

I went out to drive the Jeep today and I turned the key and it cranked but no start. I pushed the shrader valve and fuel came out so I assume the fuel pump is working. What else can I check to find out what the problem is?

 

C

Cml

NAXJA Forum User

Location

St. Catharines, Ontario

• Jun 10, 2005

• #2

Check the Crankshaft Position Sensor. Don't ask me where it is because I had a shop replace it but the symptoms are the same and every xj owner I know has had to replace it.

Chris.

 

B

BigIrish

NAXJA Forum User

Location

GA

• Jun 10, 2005

• #3

The crankshaft position sensor is located near the top of the drivers side transmission bellhousing.

 

K

Kreutz

NAXJA Forum User

Location

Chicago, IL

• Jun 10, 2005

• #4

After you check the CPS, I'd check out the ignition coil, ignition module, and the distributor to make sure they are all getting spark.

 

S

scott88wagoneer

NAXJA Forum User

Location

Cisne Illinois

• Jun 11, 2005

• #5

I know this will sound stupid, but how do I check the cps and all the ignition componets?