Skid for claytons?

X

XJjosh

NAXJA Member #1025

Location

USA

• May 28, 2005

• #1

which skids will work on a claytons long arm crossmember? case and engine?

 

N

NotMatt

NAXJA Forum User

Location

Wenatchee, WA

• May 28, 2005

• #2

XJjosh said:

which skids will work on a claytons long arm crossmember? case and engine?

Click to expand...

As far as the t-case skid, use a full belly skid like the DPG offroad... just mount it further back (butted right up against the clayton crossmember) instead of where it would normally mount (over the stock crossmember). Don't think OEM or other skids that mount to the crossmember will work.

Don't know about engine skids... never needed one.

 

jrsxj98

DILIGAF

Location

Crawlorado

• May 28, 2005

• #3

Just go with TnT LA's and you dont have to worry about it.......

 

Kittrell

NAXJA Member

NAXJA Member

Location

Thornton, CO

• May 28, 2005

• #4

jrsxj98 said:

Just go with TnT LA's and you dont have to worry about it.......

Click to expand...

......How much you makin' for advertisement...............:laugh3:

 

X

XJjosh

NAXJA Member #1025

Location

USA

• May 28, 2005

• #5

Ok. Maybe I didnt specify. I already have the longarms, I just need skids. I have the clatons xmember and the RE arms. I just need a compatible skid. thanks

 

9

93xjmark

NAXJA Forum User

Location

Rocky Hill CT

• May 30, 2005

• #6

I didn't have time to fab a skid in time for this weekend's run, so I used the old factory transfercase skid temporarily. Bolted it in place on the rail, and positioned it to the Clayton crossmember like the original. Drilled and tapped it to accept 3/8" bolts. It held up fine.