Lock-rite springs

xjj33p3r

NAXJA Member #1108

Location

garland, tx

• Apr 26, 2005

• #1

I bought a used locker, didn't come with instructions, so I only used one set of the springs in the locker, not both in cunjunction with eachother to allow it to disconnect when you need it to. Where can I get a new set of those small springs that come with the lock-rite? It should be 8 springs total, but I don't know where to start looking for them.

 

johnnyc

NAXJA Forum User

NAXJA Member

Location

La Habra, CA

• Apr 26, 2005

• #2

You can get them directly from Richmond Gear. Randy's Ring and Pinion also sells them.

 

Fergie

NAXJA Forum User

Location

Flagstaff, AZ

• Apr 26, 2005

• #3

DPG Offroad is where I got mine. I bought a hardened Zytanium cross-shaft at the same time.

Fergie

 

M

MENEZES

NAXJA Forum User

Location

San Jose, CA

• Apr 26, 2005

• #4

The Bias springs right? I dunno that you can by those seperate. I did a quick search on google but could not find anything. Try Powertrax's webiste.

Nick

 

M

MENEZES

NAXJA Forum User

Location

San Jose, CA

• Apr 26, 2005

• #5

Fergie posted right before me. DPG is where to get it then.

 

J

junkxj

NAXJA Forum User

Location

boone

• Apr 26, 2005

• #6

If you are buying the springs you might want to get new pins also. I have seen that these can wear and need to be replaced every once in awhile.

 

Fergie

NAXJA Forum User

Location

Flagstaff, AZ

• Apr 26, 2005

• #7

junkxj said:

If you are buying the springs you might want to get new pins also. I have seen that these can wear and need to be replaced every once in awhile.

Click to expand...

They come as as a kit IIRC.

Fergie

 

xjj33p3r

NAXJA Member #1108

Location

garland, tx

• Apr 26, 2005

• #8

Thanks guys, I'll be giving DPG a call tomorrow to find some prices.