• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Head replaced for a 87' Renix 4.0

JaysXJ

NAXJA Forum User
Location
Louisville, KY
#1: I'm going to need to pull the head off the XJ and was wandering, does the No. 1 cylinder need to be TDC before doing this? .:blow head gasket:.

#2: I found a very low mileage Renix XJ in the junkyard and might just replace my existing head with the low mileage head. I take it's just a direct bolt-on?

P.S. my XJ has 190,000 miles on her and she running a little rough, VERY loud ticking coming from No.2 and No.3 cylinders.

Thanks
 
Back
Top