-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Digital clocks in Mid 90's XJ's.
- Thread starter UKJeeper1
- Start date
- Location
- Terra Firma
If yours is not easily legible, it is not LED. Jeep used two kinds of clocks. One is an LED, and that works very well. The other is an LCD, which uses a #74 bulb as backlight. If you can't see yours, you probably need to pop the dash bezel, pull out the clock and replace the bulb.
Lou
NAXJA Forum User
- Location
- ToronNo/Hamilton
RNMedic
NAXJA Member #659
- Location
- Dayton, Ohio
anyone got the blank plate that sits in the clocks place? wanna put my trans gauge in there . John
Yucca-Man
NAXJA Member # 683
- Location
- Castle Rock, CO
I've got the blank plate.....someplace. I pulled it out to install a clock and haven't seen either of them in about a month or four. PM me and I'll keep an eye out for it.
MachineMan
NAXJA Forum User
- Location
- San Jose, CA
RNMedic said:
Here's a write up on putting the trans gauge in the clock panel.
http://www.4x4trailhunters.com/article.php?id=12
cykaaro
NAXJA Forum User
- Location
- ontario, canada
Hated my backlit bulb one. Put one form a '91 in my '90. The dimmer wires I hooked in with my overhead console ones. As well, th e'91 front matches the left side of the dash which I liked.
Check here. http://www.go.jeep-xj.info/HowtoDashClock.htm
Lots of good info, plus what I discovered in doing mine.
Check here. http://www.go.jeep-xj.info/HowtoDashClock.htm
Lots of good info, plus what I discovered in doing mine.
RNMedic
NAXJA Member #659
- Location
- Dayton, Ohio
thanks had't looked around yet but that looked like a good spot, thought I might have to make my own plate tooMachineMan said: