crossmember bolts

V

VegasAnthony

NAXJA Forum User

Location

Las Vegas

• Apr 3, 2005

• #1

just wondering if anyone knows the thread pitch and size of the bolts that hold the crossmember up on the unibody

trying to save some time at the bolt shop

thanx

 

Last edited: Apr 3, 2005

XJ_ranger

NAXJA Member

NAXJA Member

Location

Port Orchard, WA

• Apr 3, 2005

• #2

in know its a 12mm bolt - corse thread if that helps...

 

MontanaXJ

NAXJA Forum User

Location

Montana

• Apr 3, 2005

• #3

10mm (aka M10) with 1.50 pitch (via Yucca-Man's site)

Greg

 

Rock Yacht

NAXJA Member #1242

NAXJA Member

Location

Cheyenne, WY

• Apr 3, 2005

• #4

Montanna's spot on. M10-1.5

Bob

 

Kejtar

PostMaster General

NAXJA Member

Location

Westminster, SoCal

• Apr 3, 2005

• #5

XJ_ranger said:

in know its a 12mm bolt - corse thread if that helps...

Click to expand...

:twak: 12mm is the hitch bolts. The other guys are right with hte 10mm ones.

 

Yucca-Man

NAXJA Member # 683

Location

Castle Rock, CO

• Apr 3, 2005

• #6

Yup, M10-1.50 and the length doesn't matter too much. I've got 50mm bolts in there right now because the excess length goes up into the frame void anyway.

 

XJ_ranger

NAXJA Member

NAXJA Member

Location

Port Orchard, WA

• Apr 3, 2005

• #7

XJ_ranger said:

in know its a 12mm bolt - corse thread if that helps...

Click to expand...

ok - i was wrong - i have a 12mm bolt because i had to drill it out and tap it because i broke the stock stud...

sorry bout that...

-Ranger

 

V

VegasAnthony

NAXJA Forum User

Location

Las Vegas

• Apr 3, 2005

• #8

thanx fellas